When i connect my ipod doesnt show up or change on computer. but.........
when i connect my ipod doent show up or change on computer, but it doesnt start to charge on a wall charger
Replace the USB cable, or plugged to another USB port.
I think that's because the USB cable or the USB port on your computer doesn't work.
Similar Messages
-
I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy -
helpwhen i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????
Even i have a same problem...
-
helpwhen i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????
iPod shuffleEven i have a same problem...
-
My ipod is showing as corrupt on one computer but not corrupt on another computer
My ipod (5th gen classic) was working fine. I connected it to my desktop where i store my library but it showed as corrupt. I restored it as per suggestion but it still says it is corrupt. When I connect the same ipod to my laptop itunes recognizes the ipod and asks me to go through the new ipod set up steps. Why is one computer saying ipod is corrupt and the other computer is not?
I have tried bypassing the usb hub on my desktop and connecting directly to the usb card, but that did not work. I also went through the 5 R's twice but still does not work.
I also tried changing the drive letter for the ipod as per another article I found on line but that also does not work.
I could use my laptop if I could import my music from my media server to the itunes library on my laptop but itunes does not recognize the media server as a disk location. My music appears under Shared...but cant sync shared to my ipod (at least I don't think i can).
If anyone can help that would be great.
Thanks.So you are plugging your iPod into a high powered USB 2.0 port that is directly located on your PC's motherboard?
My suspicison is that is somesort of driver or software conflicts with iTunes your iPod that is causing iTunes to not properly recognize the device. Have you tried removing and re-installing all Apple related software? Use the instructions in this article to walk you through the process.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
There is a link in that same article in case you have Windows Vista or 7.
It wouldn't hurt to also check and make sure all the BIOS, firmware, drivers, and chipsets are up do date on your system.
B-rock -
When I connect my iPod Touch, I can't change the content of my Apps.
I have an iPhone, an ipod touch and several nano's between my family. When i plug my son's 32gb ipod touch into my itunes, the apps sub menu will be frozen in place. It will sync new apps that i have purchased, but i cannot change the layout of the screen or remove apps one by one. the menus are visible, but there is a whited-out layer over the screens and apps list exactly like when you choose not to sync movies for instance. and yet all the apps are selected and they do load when i sync. i am not having this problem on my phone or my wife's ipod touch. the only thing that will fix this is if i do a complete restore and reset, not from the back-up. Please help, thanks.
Is the App-Installation restriction in Settings/General/Restrictions on that iPod activated?
Does the problem come back after restoring "as new iPod" without using the backup?
Message was edited by: Ingo2711 -
ITunes Store won't open and iTunes goes incredibly slow when i connect my iPod
Hadn't used iTunes for a while until a few weeks ago. Updated it but now when i try to open the iTunes Store the loading bar gets less than halfway before it gives up and just goes to a blank screen with "iTunes Store" written on it. Also when i connect my iPod it shows up under devices but if i try to click on it everything just goes really slow, no matter how long i leave it it won't bring up the page showing the details of my iPod. I emailed the support people about it but they've been no help at all so far, just wondering if anyone had any advice.
I also have the same problem except when you sync your iPod part. I also just see a blank screen on iTunes Store, even on the home page even if my connection is good. I just had this problem after I updated my Java program on my laptop (because they just released an updated version) so went updated mine. Since then, I only see a blank screen on iTunes, but when you search for a certain app for a game, it will show as normal, but when you go to the Apps tab and scroll down and click Games, it will load up but will only give you a blank screen. What's going on? Please have this fixed ASAP.
-
My computer restar when i connect the ipod
i´am from Costa Rica sorry for the bad englis.mi computer restart when i connect my ipod and i cant synchronise whit my computer.what i be bound to do.
thanks sorry for the EnglishKenichi Watanabe wrote:
So you connect the iPod to an USB port, and then your computer immediately restarts with no further action from you? That's very odd...
Try removing all USB peripherals (including any hubs) except for your keyboard and mouse, and then connect the iPod directly to one of the USB ports on the computer. If that makes it work, connect your devices one at a time.
thanks that works i finally can use my ipod -
HT5925 when I connect my Ipod touch it doesnt show on my itunes screen
my ipod doesnt show on my itunes screen when I plug it
Hello alexglvn,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Best of luck,
Mario -
i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer
Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W. -
When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??
Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
Hope this helped! -
When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
Often, when I connect my iPod Touch 2G to the PC, instead of showing up as a device on iTunes, a pop-up appears that says I have connected a camera and asks what I want to do. This device doesn't have a camera in it. When this happens, (not always)I can't update my iPod, no matter how many times I try to connect it. I have an old Nano that has never had this problem at all. Can anyone tell me what to do about this?
Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP -
When i connect my ipod to my macbook it shows up as a usb drive not in itunes
When i connect my ipod to my macbook it shows up as a usb drive not in itunes. I have latest MAC OS updates 10.7.5. Latest itunes. Also at some point it must have worked because my music library is on the ipod.
Help!!Disabling disk use MAY work... my Mac OS X is not that new so I really don't know. Go in itunes on the ipod summary page and go to the check boxes to do that. ??? good luck
-
When I connect my Ipod touch, the device dosent show up
When I connect my Ipod touch to my computor. The Device from itunes dosn' t show up. So I cant really sync my music or other stuff that I want to put on my Ipod. Please help me!.
Ok, there can be several reasons an iPod will do this:
1.) The device may have a hardware issue, such as the 20-pin connector's connection to the logic board of the device is faulty, etc.
2.) A software/firmware issue is restricting the device from connecting with the computer properly.
Here are a few things to try:
1.)
1. Restart your computer
2. Power off your device
3. Plug in your device
4.) Launch iTunes if it does not automatically launch
if that does not work:
2.)
1. Keep your device plugged into your computer.
2. Power off your device while it is connected.
3. Disconnect your device
4. Begin holding the home button of your device
5. While holding the home button down, plug your device into your computer
6. Continue holding the home button until iTunes pops up (if it takes more than, say, 1 minute, it is not working). iTunes will say it detected a device in recovery mode, and that you will need to reinstall your software. Do so by clicking the button 'Restore' under the picture of your device in iTunes (when you are on the page of your device inside of iTunes).
if that does not work:
3.)
1. Power on your device while connected to your computer
2. Leave your device connected to your computer and power off your device by pressing the home and power buttons down
3. After 10 seconds from the time you started holding the buttons, release the power button, but continue holding down the home button
4. Stop holding the home button down once iTunes launches and says that your device is in recovery mode, then proceed to do a software restore by clicking on your device in iTunes, then clicking the button that says 'Restore'.
Maybe you are looking for
-
Windows developed report hangs on Unix Reports server ??
Hi, We recently migrated from a Windows BI tier to HP-UX Itanium. The problem I have is that one particular report just hangs in the Unix reports server. The basics of the report are that it has repeating frames which displays three record blocks per
-
Error while creating Org Structure
Hi, Im creating an Organization structure,where 2 Org units/positions report to 1 top Org Unit/Position.When i create the relation between one Org unit and sub Org Unit it is saved correctly.But if im trying to create a relation between another sub O
-
Can't create a profile or find newtwork
I have a WRT300N and a WMP300N card with 3 computers in my house. My bro's computer is wired. My sisters has one WMP300N card and works fine. My Computer was working fine I used it this morning then I lost my connection and my linksys wireless networ
-
Well , my ipod fell alot when its with me. Like now it has a broken screen & before the broken screen its been in water. So the thing is , my ipod wont charge! Like everytime i put it in a charger the screen shows a picture of a battery with a red b
-
Lighroom 6 Aktivierung geht nicht?
Ich bin online. Der "Zwei Logo test" zur Prüfung der verbindung zum Aktivierungsserver funktioniert. Bei jedem Start von Lightroom kommt die Aufforderung zur Aktivierung wieder. Was tun?