When I connect my iPod touch to my stereo, I cannot skip tracks using my iPod or the stereo controls.
When I connect my iPod touch to my stereo, I cannot change tracks using the iPod or the stereo controls. I did not have this problem with my iPod nano. I have the software update 4.2.1 installed. Is it a problem with the software or the stereo? Please help.
Here:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Similar Messages
-
Lost ipod touch it was password protected can apple track it. i have the serial number
lost ipod touch it was passcode protected. can apple track it. i have the serial number
Apple does not track stolen devices. If you didn't have the Find My iPod touch app installed, you're pretty much out of luck.
Reporting a lost or stolen Apple product -
Using 2G iPod Touch with Motorola S805 can't skip tracks
I have a 2nd generation iPod Touch running the 3.1.1 firmware and I just recently bought the Motorola S805 bluetooth headphones. For some reason, I can't use the built-in controls on the S805 to skip forward and back through tracks. The play/pause and volume controls work fine. I know that it is not a problem with the headphones because the skip controls worked with my music-enabled cell phone. Is this a compatibility issue on Apple's part by not being standardized with the AVCTP (Audio/Visual Control Transport Protocol) or just an issue that sometimes arises during pairing? Any input would be appreciated.
Unfortunately I found the answer -- apple devices do not full support bluetooth avrcp profile version 1.0. Apple only supports pause/play/stop.
See here:
http://discussions.apple.com/thread.jspa?messageID=10444373� -
any help is appreciated
Highlight the movie in iTunes, go to menu ADVANCED and select create iPod version. Sync the newly created version over to iPod. Will it play this time?
-
anybody familiar with this?
jcservek wrote:
anybody familiar with this?
Yes. It's been asked and answred many times. See the "More Like This" section on the right side of this page or do a simple Google search. -
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
-
I have an 8g Ipod Touch and I accidentally recorded some video on it. Now I don't know how to delete it. When I connect to Itunes, there is no 'Video' Folder, so I can't even see/find the videos to delete them! I am not very experienced with Itunes, please help me.
On the iPod go to the Photo app and then to the Camera Roll. Tap on the the video yu want to delete and then tap on the trash can icon in the lower right.
-
i have an ipod touch and for some reason cannot connect to itunes store. I have full wifi and can get on my safari and was able to update my apps before. I can still get apps but when i try to update it says cannot connect to itunes store. Some1 help!
See these previous dicussions:
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities -
When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens. I have followed all the trouble shooting suggestions but nothing works. Ideas?
Hi msclaude,
Welcome to the Support Communities! I'm not sure from your post what steps you have tried, but it sounds like you may need to use recovery mode to address the issue with your unresponsive iPod touch.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
If you can't update or restore your iPhone, iPad, or iPod touch
You can put your iOS device into recovery mode, then restore it using iTunes.
Use recovery mode
You might need to use recovery mode to restore your device in these cases:
iTunes doesn't recognize your device or says it's in recovery mode.
You see the Apple logo onscreen for several minutes with no progress bar.
You see the Connect to iTunes screen.
Learn what to do if you see the progress bar onscreen for several minutes.
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
I hope this information helps ....
- Judy -
my ipod dose not open when I connect it to my laptop so I can not transfer any data to my laptop the ipod dose come on with itunes so I can transfer data to my ipod I have re installed itunes can any one help please, when I first got the ipod it did work ok
Try:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
My iPod Touch 5th Gen won't open. I don't know if the battery is empty or what. I tried connecting it to the computer but it won't start up. I think it just heating up. When I tried to charge it, after a few seconds it it hot. Can somebody help me, please?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The hotness suggests a battery problem
Apple Retail Store - Genius Bar -
so this christmas that just assed i got a new ipod touch 4th generation! recently it has fallen and cracked and at the top left corner pieces came off, but after 2 days ago i couldnt get wifi at my house! i do not have a router but i always could get it perfectly in my room from my neighbor! but recently its been agravating me because i cant do anything about it, and at school id et wifi everywhere but now i only et it in one class!
and also i have the pinger textfree app and it wont let me get on it, it will sit there with the logo for 5 minutes and bring me back to my home on my ipod even without wifi, can someone explain to me why my ipod is acting all weird? i also resetted it 2 times and nothing happened i resetted my networks and nothing, someone please help me wiht my problem! ):Does the Ipod see the network?
It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the antenna. See:
http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3 -
When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.
Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet. -
I recent recieved and Ipod touch model A1213 and i cannot figure out how to get apps on it. I have tried everything i can think of and when i try to update my ipod software it tells me that its already up to date. even though its only 1.1.5. How do i fix it?
You have a 1st generation iPod Touch.
It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
My iPod Touch is te 4th generation with iOS 4 only... The desktop that it used to connect with was broken and I couldn't update my iPod touch as all content is linked to the iTunes on that broken PC. What should I do?I don't want to erase all my music recording. (couldn't back up easily...) my dairy, my financial record made on apps...
If I got a new Mac book pro soon, would it helps backuping everything?awesome121, he does not an an iCloud account. You need iOS 5 or later for iCloud and the poster said he has iOS 4.
awesome121 wrote:
DO you have a icloud account?
Maybe you are looking for
-
HT204053 "This Device already associated with an apple ID" message is making me crazy. Can you help?
Hi, I have a new Iphone, a 4s, that I was given to me by my employer. It replaces my old one, my personal phone, that I gave to my daughter. Everything worked well until I turned ITunes Match "OFF" because I was traveling overseas and didn't want
-
Gl account and cost center in fb01
hi, 1 may i know why balance sheet account allowed to have cost center? in fb01, when i enter balance sheet account, cost center field is available. 2 why vendor or customer account not allowed to have cost center in fb01? thanks rgds
-
I have 3 lines that I use Verizon Family Base for. 2 lines are here in Alaska. I've only added data restriction. The 2 lines here in Alaska are able to recieve/send text and recieve calls except make outgoing calls which they get an error message th
-
Configuration Business Service for tuxedo
Hi everyone: I've been configuring AquaLogic for Tuxedo Service, but I'm stuck in "Edit a Business service - Transport Configuration" I'm using JMS, What do I need to Endpoint URI?, What should I put in this textbox? I'm folowing the standard example
-
Everything said in the discussion name. I have to change the external glass and this problem too. Someone knows if I have to do necessary the backup?