When I connect my Nikon 200 to my Macbook Pro it is not recognized.
How do I transfer the images directly from the camera to my MacBook? What am I missing? I have a MacBook Pro 13-inch that I bought in June 2012.
Open iPhoto. In the menu bar, go to iPhoto / Preferences / General.
Make this selection:
This way when you connect your camera, iPhoto will open. When iPhoto opens it will show the images on the camera. You can select what you want to add to your iPhoto Library. In other words, transfer them to your computer.
Similar Messages
-
when I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?
Hi robfromkinglake west,
Try and isolate the issue. Check if it's only with this drive.
Check the drive with Disk Utility
Using Disk Utility to verify or repair disks
http://support.apple.com/kb/ht1782
I've never seen a drive take 20 minutes to mount.
Nubz -
Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567 -
Basically I bought my new Macbook Pro retina display in September 2014. My wifi was working perfectly well for about a month or two until Yosemite was brought out. I'm not sure if it was immediately after I downloaded Yosemite or not, but not long afterwards I noticed I was having trouble with my wifi (and not just mine but my schools as well). Every time my computer tries to join the wifi network it will work for a while (5 seconds) and it will say that I have a wifi connection but then it will just stop working and it will say I'm not connected to wifi. A few seconds later and it will then reconnect and say I have wifi. I am fairly certain this is not my wireless router ( a BT home hub) as I have other devices such as my iPhone and a computer which does not suffer these problems. After a while of it loosing connection and then gaining connection it will finally stop and the wifi icon at the top will suggest I have a wifi connection but when I hover over it, I see it says "Wi-Fi:looking for networks..." and then 2 seconds later it will say "Wi-Fi: On" and it will repeat like this for however long I am on the network. When the icon appears to suggest I have a connection I am able to load a webpage but it is slow and watching Netflix can be tiresome. I've scoured these forums for information that will solve my issue however all I have found is outdated information from 2010 or 2012 or too technical information that I can't understand. Does anyone else have this problem, has anyone else found a solution, it would be much appreciated if any one could help me solve t.
Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Be sure to test on more than one Wi-Fi network, if at all possible. A desktop computer can be tested with a mobile hotspot, such as the hotspot created by a cell phone. If the problem only exists on one network, then the access point of that network should be the focus of your attention, not the computer.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first. Turn Wi-Fi off and then back on. You'll be prompted for the password when you reconnect. Save it in the keychain.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center. -
plzzz help me... i think my battery is also gone..its been only 193 cycle count out of 1000....now count no is also not showing..plzz help me..
For power related issues such as yours, the first step should be to reset the System Management Controller.
Best of luck. -
I am trying to connect my new ipad to my officejet pro 8500a plus. not recognized by the ipad.
iPad message: No AirPrint printers found.
This question was solved.
View Solution.Rfe, make sure bluetooth is disable when you try and use airprint. Bluetooth has been known to interfere with AirPrint. Next download the latest HP Product Updates:
On the product control panel, touch the Right Arrow ( ) to display the second navigation screen.
Touch Setup ( ), and then touch the Down Arrow ( ) to display the Web Services Setup Menu.
Touch Web Services Setup .
Touch the Down Arrow ( ) to select Product Updates .
Touch Check for Product Updates
Also be sure that your printer is connected to the wireless network. you can print out a network configuration page by:
On the HP product control panel, touch the Right Arrow icon ( ), and then touch Network .
Touch Wireless , and then touch Wireless Network Test . The HP product prints a network configuration page.
Just make sure "Status" stated "Connected." Hope this helps!
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome this?
You are probably seeing this message because the camera uses the same port to charge it. The iPad can not supply the power to charge devices from it's dock connector. Also if you use the SD card adapter you are not using up the camera's battery for transferring the photos.
-
I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?
I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).
-
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
Just bought new iPod touch. When I connect to computer to sync it tells me "iTunes could not connect to this iPod touch. Could not send a message to device." Not sure if it is b/c of an older version of iTunes but connecting via wifi sync unacceptable
What version of iTunes is on the computer? You need at least 11.4.
-
I have tried connecting a number of devices to my MacBook Pro but I have found if I try to connect 2 or more using either usb ports or a usb hub the computer reports 'disk not ejected properly' and sometimes it will fail to recognise the device and remove it from the desktop or it stalls operation and I have to turn the computer off at the power button.
I have tried erasing the hard drive and reinstalling the operating system.
I have done various types of reset suggested by apple support.
The computer has been to an Apple dealer who has tested the hardware but found nothing due to the intermittent nature of the problem.
I have operated the computer with only the software originally installed on it present.
Could it be possible that a virus could be present on the usb devices I am trying to connect?
My computer is a MacBook Pro (13-inch, Mid 2012)
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Startup Disk Macintosh HD
Graphics Intel HD Graphics 4000 1024 MB
Operating System X Yosemite 10.10.1
Devices I have connected to USB ports all USB 3.0 compatible in a variety of combinations:-
7 port superspeed USB 3.0 hub (powered).
4 port Inateck USB 3.0 portable hub (not powered).
Buffalo ultra portable 500Gb USB 3.0 hard drive.
Seagate Expansion portable 500Gb USB 3.0 hard drive.
Seagate Expansion desktop 2Tb USB 3.0 hard drive (powered).
Seagate Expansion desktop 3Tb USB 3.0 hard drive (powered).
ScanDisk Cruiser Edge 16Gb USB stick.
ScanDisk Cruiser Edge 32Gb USB stick.
Hewlett Packard 16Gb USB stick. (This causes an instant crash now.)Why?
- Because when I'm editing/ rendering lots of HD video everyday, I don't want to share system resources between virtual machines... I want the entire system's resources devoted to what I'm doing.
- I don't want to spend anymore money than I have to in order to buy one of the faster virtual systems. Not to mention, I've had a bad experience with Parralels in the past and I'd rather not use one again.
- I really don't want to clutter up my system anymore than I have to for a project that's only going to take a few weeks.
- I don't mind swapping hard drives... it takes two minutes, and I have an empty ssd just sitting on the shelf.
So, back to my original question. Can I just swap the computer's drives, then install Ubuntu on the second drive and be good to go without any harm to my MacBook Pro or OSX on the other drive (which wouldn't be connected when Ubuntu is running)?
Thanks. -
i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!
<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html> -
when i connect my iphone to my pc i get "itunes could not connect to this iphone. An unknown error occurred (0xE8000012) i have the correct itunes i also tried to reset my phone, i did this before i went to bed and it was still trying to reset when i woke the next day should it take this long?
http://support.apple.com/kb/TS3221
-
When I connect my iPad to my new Mac Pro, I can't see my pictures
When I connect my iPad to my new Mac Pro, I can't see my pictures on iPhoto in Mac Pro under devices.I want to import my photos from iPad to Mac Book. Can you please help me?
Thanks and regards,Oops ... You are correct. I misread your question. My sincere apologies. You want to import the photos from the iPad into iPhoto - not the other way around.
Connect the iPad to the Mac with the cable and launch iPhoto. Your iPad should appears under the devices heading in iPhoto - in the left sidebar - just like it does in iTunes. Click on the iPad name. Then you can import the photos. -
My phone will not turn off, has not done so for ages, Today I tried to upgrade which failed . Now my screen shows only the itunes symbol and a usb lead. When I connect to itunes it informs me the sim card is not supported though it works on other phones. HELP
Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message.
Maybe you are looking for
-
How to configure VPN with Cisco ASA 5505 behind Actiontec MI424WR
I'm trying to test my Cisco VPN client from my workplace to my home where I have a Cisco ASA 5505 (VPN server) behind the Actiontec MI424WR. I'm able to Ping the Actiontec external IP. I also have Port Forwarding for IKE and IPSec configured on the
-
Why is syncing ical not working with mobile me?
I have been having 2 macbook pros and a new imac sync ical, mail and address book. The imac is on Lion, the laptops are 10.6.8. They were syncing fine until a week or so ago. Is this because the 2 are not Lion? I am using mobileme, not yet switch
-
my music is not playing
-
Bought an iphone 5 that has a icloud activation lock
I bought an iphone from a friend from school and he said his brother gave him the phone so i bought it and when i turned it on and put my sim in the phone it went to an icloud password and id screen .. so i call him and i get no answer so i wait it o
-
Hi, so my faithful first gen MacBook Pro has died and I'm looking to replace it. I've pretty much narrowed it down to two possibles... Refurbished iMac 27-inch 2.7GHz Quad-Core Intel Core i5 or Refurbished MacBook Pro 2.8GHz Dual-core Intel i7 (and b