When I connected iphone an error code came up(0xe800065)
my question is as stated above
There are some troubleshooting steps for 0xE errors in this article: http://support.apple.com/kb/TS3221.
Similar Messages
-
When i connect iphone it is showing camera connetced & not showing in Itunes on my machine
when i connect iphone it is showing camera connetced & not showing in Itunes on my machine
having same problem. Did you figure it out?
-
I WAS UPDATING SPFTWARE ON MY IPHONE BUT ERROR 56 CAME UP WHEN I TRIED TO RESTORE ERROR 3024 CAME UP NOW ON THE SCREEN IS A SYMBOL OF THE CBLE AND ITUNES CAN NOT RESET IT CAN ANYONE HELP??
You'll have to put your iPhone in Recovery Mode.
Recovery mode
If you've never synced your device with iTunes, or haven't set up Find My iPhone, you'll need to put your device in recovery mode. Then you'll restore your device as new or from a backup.
This will erase the device and its passcode.
Disconnect all cables from your device.
Hold down the Sleep/Wake button, then "slide to power off" to turn off your device.
Press and hold the Home button and plug the device into your computer. If your device doesn't turn on automatically, turn it on. Don't release the Home button.
Continue holding the Home button until you see the Connect to iTunes screen.
If iTunes doesn't open automatically, open it. iTunes will alert you that it has detected a device in recovery mode.
Click OK. Then restore the device.
If your device doesn't go into recovery mode, try steps 1–4 again. -
My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.Please help me out.
Hi ahsanikram!
I have an article here for you that can help you troubleshoot this issue with your iPhone:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
If you are still having issues after attempting the troubleshooting steps in the previous article, see the following article:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Error sending emails to Internet: Failed to connect. Winsock error code: 10051
Our exchange 2013 CU2 (CAS+MBX, Win2012) was sending emails to Internet using another server (a kerio email server) and outbound internet email was working as expected.
We have now removed the Kerio server, I also removed the kerio_Send_Connector I was using to send emails to internet and I also changed the email domain in Exchange to be authoritative. I created a new Internet send connector with default values, but the same
bad behavior is present.
Our Exchange 2013 receives emails internally and externally with no problems. The problems are sending emails to Internet. I am suspecting something in the firewall but i need to do some more research.
If from the same Exchange server I telnet to an Internet email host:25 I do get the smtp banner but as soon as I start typing HELO/EHLO I get disconnected and errors are logged.
Errors when sending emails to any emails address (this is from an email sent to google, all others are the same):
Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '400 4.4.7 Message delayed'
7/1/14 9:52:44 a. m. - Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted
failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 74.125.136.26:25'
I cannot find any references from such Winsock error that are related to Exchange 2013.
So far all email is being queued at the Exchange Server 2013. I am afraid to install CU3 and make things worse.
Thanks for your comments.Just check if the receive connector settings are set to fine
check the send connector properties and see whether it is set to use DNS to route emails through external DNS/Internal DNS or smart host .
Do a telnet to external domain like hotmail,yahoo and see at what transaction you are getting an error
Enable verbose logging, restart the transport service and check if you get the same error in the verbose logs as well
Get in touch with the ISP and see if the port 25 for Outbound SMTP is opened.
YOu can check if SMTP Proxy is enabled in the firewall. If so disable the SMTP proxy in the firewall and check.
Good Luck!!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.
That will encourage me - and others - to take time out to help you.
Regards,
Sathish -
"connection not available error code - 4161" what...
Hi
I have been trying to upload my workouts to Nokia traker but when I start the application I get the following "connection not available error code - 4161" What does this mean and how do I sort it
ThanksI did a comparison, and your connection string is different
than mine. Mine does not show any password/userid entries, but
perhaps that's the difference between using SQL and SQL Express.
(I'm using SQL.) I am, of course, assuming that you have actual
values for "servername," "database," etc.
Given that you can't get in from RSC Explorer, it would seem
that either you are not using the same userid/password as the one
you set up for the administrator when you created the DB, or else
there's something wrong with the DB itself.
Try creating a test DB. Be careful to specify the same
administrator name and password as the login you use to get on the
RSC server. After you've created the test DB, open it up from RSC
Explorer. If you can do this successfully, then everything ought to
be working OK. From that point, I'd start over and create a new DB,
and upload to that one. (In fact, I've actually gone through
exactly that total exercise before.
G -
iphone 4 is not recognized by itunes and is only on emergency mode, keeps telling me to connect to itunes but when I connect iphone to computer it does not recognize it
Did you try recovery mode? Hold down the home button as you connect it to iTunes. iTunes should pop up a window that says "iTunes has detected a device in recovery mode" and give you the option to restore.
-
i am getting this for the first time when i sync .iphone 3gs error message itunes could not sync calendars to the iphone because the sync server failed to sync iphone
I have tried the suggestion to reset the sync log to no avail. Anyone have another idea? This just started after I downloaded 4.3.5.
-
I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.
I did not use ICloud or any storage and did not make any sync before.
Is there any Trash Can in Iphone in order to find them? I am dumb and I did not think about save them before connect to PC.Your photos are gone. They were wiped when you restored your phone. There is no "trash can".
You obviously don't understand how to use the iPhone properly. Attached is a link to the iPhone User guide. I suggest you read through it to avoid data loss in the future.
Best,
GDG
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
TS3694 When emptying trash I get error code -8003. Anyone know what the problem is?
When emptying trash I get error code -8003. When I get this error I am trying to delete downloaded softeare. Typical file deletion works okay.
This is on an iMAC. Don't knwo why I cannot pick an iMAC community below.
Leparker46http://support.apple.com/kb/TS3297
http://reviews.cnet.com/8301-13727_7-20020873-263.htmll -
Recently when I connect Iphone 4s and MacBook Pro my computer stopped see new photos on Dropbox.
Recently when I connect Iphone 4s and MacBook Pro my computer stopped see new photos on Dropbox. I have changed iCloud password on Mac and Iphone, nothing. Deleted some pictures of iPhone, didn't help. Any ideas what I did to mess this up?
I cannot deleted. Computer keep telling that my dropbox is open. Don't see how to shot it off. Do I need to delete all pictures from dropbox first and delete application after. Will I loose all these pictures? Usually, I copy all photos to iphoto app.
-
Itune freezes when i connect iphone on macbook pro
every time iTunes freeze when i connect iphone or iPad on my MacBook Pro
please advice what is to be done to repair it.Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???
The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.) -
I have the iphone 4 and when syncing my iphone an error message appears half way through saying "itunes cannot sync apps to the iphone because the apps installed on the iphone cannot be determined" can anyone help? I cant back up my iphone as this appears every time :-(
As another post suggested, I restarted both the iPhone and the computer, and that fixed the problem.
-
As per attached wireless design I have two outdoor access points connected to cisco 5508 controller, everything is working fine only problem is that when I connected iPhone 4,5 and 6 it's showing connected and working! only not showing wireless icon on top of screen (see the attached icon), but when I connected to Android like Samsung it's showing connected and showing icon as well top of screen.
Advanced thanks and highly appreciateI have an iPhone 4, 5 & 6 and when successfully connected to the controller all does have the wireless icon on the top left. I don't think they are connected to the wireless... Might be associated, but not authenticated. Look at the client on the controller and see if they are in the policy state: RUN If they are not in the RUN state, then they are not connected.
-Scott
Maybe you are looking for
-
XSL-1047: (Error) Invalid instantiation of 'xsl:output' in 'INSERT' context
Following is my development environment: JDeveloper 9i Release Candidate JDeveloper JVM 1.3.1 Oracle XML Parser v2 9.2.0.0.0 I'm using the Oracle XML Parser V2 9.2.0.0.0 library to apply a stylesheet to an XML document. However when I invoke the call
-
Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white scree
-
When I go to Central Admin > Upgrade and Migration > Manage Databases Upgrade Status, I have 2 content databases which have the status: Database is up to date, but some sites are not completely upgraded. How can I determine which sites are not compl
-
Turn off "Send form again" while browing backwards in safari
When I am in safari and select the browse to previous page tab, sometimes a "Send form again" pop-up appears. In particular, this is most annoying when it appears while I am in sites related to university and online courses, which of course slows dow
-
Mac book pro, mountain lion screen flickers. Any solution?
Hi Suddenly the screen of my mac book pro started flickering. I have no idea what's going on. Tried couple of tricks (re-setting the EPRAM...), but nothing works. Any help? thanks