When I connected the earpods to my ipod nano, I can't hear nothing
When I connected the earpods to my ipod nano, I can't hear nothing....
The jack is very tight when it is new, press the headset connector all the way in, there should be no space between the plastic on the headset jack and the body of the Nano.
Similar Messages
-
When I was updating my ipod touch to the new iOS last night it died and now I have nothing but a white screen. iTunes no longer recongnizes the device and it won't turn off when I hold the power button or when I hold the power and home screen button.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The screen on my ipod nano broke, can I get it replaced?
If so, where, and how much, it's a ipod nano 5th gen.
Thankyou.Go to your nearest Apple shop, to the Genius Bar, and let them fix it! As for the price, i'm not sure, but for my iPod nano 3th gen, $30
-
I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.Hi maddogdne,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/ht3406
Cheers,
- Judy -
I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting
See KB Article: How to use your iPod to move your music to a new computer
-
Sorry about the long title.....its my first post.
My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period. My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
Apple Retail Store - Genius Bar -
My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
i have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb. Any answers? please
You can sync your iPod with multiple computers, but what can be synced is very limited. See this article for more details.
http://support.apple.com/kb/ht1202
B-rock -
even when i connect the ipod to itune it's not showing and even when the ipod says connect to itunes the ipod still can't show up to itune connection...
iOS: Device not recognized in iTunes for Windows
also
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The I pod has gone blank and when I connect the USB wire to the laptop, nothing happens. no sound, no power to turn on the I pod.
how do you know if the battery is at life end. We just got this within a year.
please help.
thanksTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts to works. Anyone already have simmilar problem?
A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing -
I have an ipod 2 just bought an ipod air and would like to transfer everything over from ipod 2. i backed up the 2 in itunes and when i connect the air it does not even show up. any help would be greatly appreciated.
sorry not ipod 2 but an ipad 2
-
My Ipod 160GB Classic Hung. I connected and restored to factory settings. But later when I connected the data from I Tunes is not syncing at all. Please guide
This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.
-
I am trying to update a 4s. The update did not work for some reason. Now I need to restore the iPhone. When I connect the usb to the computer and phone it says I need to restore. So, I click to restore. It starts extracting the software. But I am continually getting the same error message that it cannot complete for unknown error. I have been working on this for 5 and a half hours. I'm tired, mu husband needs his phone and apple support is a joke and of course I can't find any answers anywhere. Please help!
Hi MB2751,
As an iPhone user myself, I know it must be very much a problem to have the phone out of service because of an error such as you are seeing. Let's see if we can get you back up and running.
I would suggest that you troubleshoot using the steps in this article -
If you can't update or restore your iPhone, iPad, or iPod touch
Thanks for using Apple Support Communities.
Best,
Brett L -
I have just upgraded to Iphone 4S as my Iphone 3G failed. I want to transfer the data which I believe is stored in my Itunes account. But when I connect the phone to my computer nothing happens it just ask me if I want to download pictures or video. it does not go to my Itunes account.
swisscom say they cannot help it should go to your account and select the phone under devises but I canniot get a screen to do this can anyone help
ThanksTry restarting the AMDS > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Maybe you are looking for
-
Problems with retrieving data from tables with 240 and more records
Hi, I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok. I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables. First I
-
Tablet crashes when trying to shut down after new 4.3 update
He guys My self and my parents have each got one of these fantastic tablets and since this new update. There has been NOTHING but problems........ Flickering screen DNLA not working....... And now a new thing that all 3 of us have noticed..... When i
-
All, I am using ADF 11.2 with ADF BC and ADF Faces. I have a requirement where user should be able to click link for ex <a href="http://ADFAppURL?search=123"> and it should take user to row pointing to id 123. I am not quite sure how this can be achi
-
2 base system device drivers missing for dv9731ca on windows 7 os
2 base system device drivers missing need help installing cant find them
-
Submitting a PodCast from México [Part 2]
Hi everyone, Well, we´re back with the goodies, more free podcast, two new feeds. Last time MacMuse helped me a lot in here, i hope he´s around. Anyway, help!! ¿Anyone? ¿Anyone? I need to submit this feeds to the iTunes Music Store. Para Papás http:/