When I connected to FREENX server, the client can see nothing

I choose UNIX-KDE in my client, but only find a black windows with 1024x768 when connected , and when I check the server, I found no KDE running.
On my client machine I edit the connection, select "custom" under the desktop section, and manually specify the command for starting kde. but that doesn't work eighter .

I checked this issue with 32 and 64 bit versions, as well as different desktops to connect to (KDE, Gnome, XFCE4). The problem is always the same, so I believe the actual version of freenx is just buggy. Please, whoever maintains freenx, have a look at it. The problem happens with any NX client. I used the new version 3 due to best logging. Again in short:
- Installation and nxsetup works well
- Authentification works
- Downloading session information works
- The clients last message is: "Established the display connection"
At this point Nomchines session administrator shows a running session, although no display is showing up. A little later the client terminates with a timeout and following log:
nfo: Proxy running in client mode with pid '7600'.
Session: Starting session at 'Sat Jun 30 11:26:05 2007'.
Info: Connecting to remote host '192.168.1.50:5000'.
Info: Connection to remote proxy '192.168.1.50:5000' established.
Warning: Connected to remote version 2.1.0 with local version 3.0.0.
Info: Connection with remote proxy completed.
Info: Using LAN link parameters 1536/24/1/0.
Info: Using image streaming parameters 50/128/1024KB/6144/768.
Info: Using image cache parameters 1/1/32768KB.
Info: Using pack method '16m-rle-9' with session 'unix-kde'.
Info: Not using NX delta compression.
Info: Not using ZLIB data compression.
Info: Not using ZLIB stream compression.
Info: Not using a persistent cache.
Info: Forwarding X11 connections to display ':0.0'.
Session: Session started at 'Sat Jun 30 11:26:05 2007'.
Info: Established X server connection.
Info: Using shared memory parameters 1/2048K.
Session: Terminating session at 'Sat Jun 30 11:27:07 2007'.
Info: Waiting the cleanup timeout to complete.
Warning: Parent process appears to be dead. Exiting watchdog.
Last edited by jcci (2007-06-30 03:31:38)

Similar Messages

When I connect to our server using smb:// can't copy files or edit names on server?

When I connect to our server using smb:// can't copy files or edit names on server?

Why not? What happens?
Do you get an error message? What does it say?

HT201263 I have the ipad 1, and I tried to reboot it but when I connected my ipad to the computer it did nothing. When it is charging the apple logo simply flashes on and off again. It is trying to start up but can't. Help!

I have an ipad and the only thing it does when you plug it in to the wall is flash the start up apple logo. It will not reboot because itunes can not reconginze it. I have tried holding the home and power button's together but it doesn't help.

I'm sorry, you are correct I am trying to restore my ipad because it stopped working.   We thought the battery was dead so we plugged it into the wall charger. All it does when plugged in is flash the apple logo like it is going to start up and then shut off. It repeats this every few seconds while it is plugged into the wall. I let it charge overnight and still nothing.
When I hold the power button and the home button down together while the ipad is plugged into the wall, it does flash then after I release the power button the connect to itunes screen comes on.   But when I connect it to my computer it goes blank.   itunes does not recongnize my ipad when I plug it into the computer. I have used the same cord to plug in my other devices and itunes recongnizes them so it isn't the usb cord.
It seems as if my system has crashed and I think this may just be an apple service trip for me. But thanks so much for the advice.   =D

When i connect my iphone to the computer it gives me this message "ITunes could not sync contacts to the Iphone "my name" because the sync server failed to sync the iphone. whats the problem

when i connect my iPhone to the computer it gives me this message "ITunes could not sync contacts to the iPhone "my name" because the sync server failed to sync the iPhone. what is the problem?

What type of computer?
Mac: Sync Services: Advanced troubleshooting for contact and calendar syncing
Windows: Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
The following previous discussion may also help: Re: sync server failed to sync the iphone

When i connect my ipod to the computer a box pops up and say that itunes cannot locate this device, and if the problem persists to uninstal itunes and then reinstall. Well i have my own user on tunes so if i uninstall ituneswill it uninstall on all users?

when i connect my ipod to the computer a box pops up and says that itunes cannot locate/read this file, and if the problem persists to uninstall itunes and then reinstall, but i have my own user on the computer, so if i uninstall it on my user will it uninstall it on every user?

Hello BPeery,
I would go through ALL the steps here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Let us know how it goes.
Hope this helps.
~Julian

I was on iTunes on my computer trying to drag a song from my iPhone 4 to my computer but when I connected my phone to the computer using a USB cable then it said that it couldn't connect to my phone because I need to get the later version of iTunes. How?

I was on iTunes on my computer trying to drag a song from my iPhone 4 to my computer but when I connected my phone to the computer using a USB cable then it said that it couldn't connect to my phone because I need to get the later version of iTunes. How do I do that?

Hi Soccer4461,
If you need to update your iTunes software, you may find the following article helpful:
OS X: Updating OS X and Mac App Store apps
http://support.apple.com/kb/ht1338
Regards,
- Brenden

When i connect my iphone to the computer, win 7 i get the mtp driver error (Code 31).

When i connect my iphone to the computer, win 7 i get the mtp driver error (Code 31).
I must mention that connecting the phone and accesing it as a camera worked before but at some point it didn't and i keep recieving this mtp driver error. I tried everything including deleting registry entries, reinstalling multiple times, use the log administrators command in cmd, i don't have a pass on my phone, nothing worked so far. Any help would be apreciated.

Yes I did.. Everything is ready. Just when I plug the cable into the phone and the computer nothing will happen.. When I plug it into our "business" laptop immediately it will show that it is connected... With this laptop I am using now, nothing happens..

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

Where can I find or open the bar "others" when I connect my iPhone to the iTunes?

Where can I find or open the bar "others" when I connect my iPhone to the iTunes?

Re: what is the procedures to free some space on my ipad to download videos?

I know my network connection is fine and I've checked all the cables and that the tv is set to the correct source, but even though Apple Tv is on and responds with beeps when I hit the button, I see nothing on the screen. What do I do next?

I know my network connection is fine and I've checked all the cable connections and my television is set to the correct input, but even though the remote beeps when I hit the button, I see nothing on the screen. The troubleshooting section in the setup guide says to make sure that Apple Tv is connected to my network by choosing Settings>General>Network. How do I do this? What do I need to do to get everything back? I've been using the Apple tv for a while now, and suddenly it's doing this.

This is the iPod touch forum. I requested your posted be moved to the Apple TV forum
Using Apple TV

When I connect my ipad to the computer and click import photos and videos, the computer says that there are no photos or videos on the ipad it says the file is empty I can't even add anything to the file!!!!!

When I connect my ipad to the computer and click import photos and videos, the computer says that there are no photos or videos on the ipad it says the file is empty I can't even add anything to the file!!!!!

It looks like the card may be the problem, and your best bet is to try the Card Reader - this will make the card accessible by the Finder and you may be able to drag the pics off to the desktop or, at worst, try recover the pics with an app like MediaRecover
Regards
TD

When i connect my iphone to the pc it automatically opens the gallery as a usb even if phone is locked.how can i protect this?

when i connect my iphone to the pc it automatically opens the gallery as a usb even if phone is locked.how can i protect this?
i want my phone to be protected so that not anyone can simply fix my phone to a pc and see the gallery. thank you

You can not prevent it using any setting on the phone, just as you can not do so with any digital camera.

When I connect my iphone to the laptop (windows) it makes a sound but i can't see it in itunes or "my computer' I have no idea why....

When I connect my iphone to the laptop (windows) it makes a sound but i can't see it in itunes or "my computer' I have no idea why....

Setting up your phone "as new iphone" is covered in this article: http://support.apple.com/kb/HT4137
Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise your phone will be wiped during the following sync.
If you have data on the phone you want to save, back up manually:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards. Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
Since changing your iTunes library will erase your phone again, do the same process when you change back to your normal PC.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519

I copied my itunes library via an external hard drive. now when i connect my ipod to the new computer i can see my music but my apps are disabled

i copied my itunes library via an external hard drive. now when i connect
my ipod to the new computer i can see my music but my apps are disabled

Here are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao.

TS1717 I have iPhone 4s. I downloaded iTunes to my PC and when I connected my iPhone to the PC iTunes showed a message that my device's time limit has expired. So iTunes doesn't allow me to transfer files from my iPhone to my PC .

I have iPhone 4s. I downloaded iTunes to my PC and when I connected my iPhone to the PC iTunes showed a message that my device's time limit has expired. So iTunes doesn't allow me to transfer files from my iPhone to my PC .

Carmell-
When I've had a similar problem, it was because I was accessing the iTunes store from a device I hadn't used before, such as when I upgraded from an iPad 1 to the iPad 2. It was a little confusing to me until I figured it out.
All I had to do was use the ID of my existing account and play along with the iTunes store. As I recall, it asked for my password twice, and the security code from the back of my credit card. After that, downloads proceeded as before.
Fred

When I connected to FREENX server, the client can see nothing

Similar Messages

Maybe you are looking for