When I copy&paste only effects.Retimed clip durations are changed.
When I Command+C a clip and Shft+Command+V to another retimed clip,Retimed clip's duration is changed.
I wanted to paste only effect to Retimed clip.
In the case of Normal time clip,this phenomena is not happen.
Is this Bugs?
Please let me know the solutio...
See response to your other thread
Similar Messages
-
I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?
Hello,
I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
Please share a screenshot if the issue still persists.
Regards,
Nakul -
When I copy/paste text to an ipages empty document can does it only show the first page of what I copied?
You want to use word processing mode. I suggest you ask your question in the Pages forum and include information about what you are copying. Off the top of my head I can't come up with any reason you'd see this in WP mode. https://discussions.apple.com/community/iwork/pages
-
BPS limitation of 50 rows when doing Copy Paste in BPS BI 7.0 Layouts
Hi,
Does anybody knows if the limitation of 50 rows when doing Copy Paste in Layouts still exist in BI 7.0 SEM-BPS ?
Thanks!
Pat.Patrice,
The limitation is this is how many records you could enter at a time.You can
always hit REFRESH and enter more records to save all of them at a time.If
you had changed your UPP_FRONT_SPREADS_DUMMIES setting to 150, try
inserting (copying) 160 records into your layout.For simplistic reasons you
could change the setting to 2 and verify if you could enter 3 records without
hitting SAVE or REFRESH.I would recommend sand-box for these activities.
Hope this helps.
Cheers
Srini -
When I copy/paste a paragraph from a PDF doc (onto Facebook status bar, for example) it pastes with no spaces between words. I.e: "The manhadajugofcoolwaterand offeredmeadrink." How can I fix this? I've searched everywhere for the solution but didn't find anyone had this issue. I'm new to Apple so any help will be much appreciated. Thanks!
I can't speak about this occurring with FaceBook since I don't use FaceBook, but I see the same type of thing when I copy and pasted from websites. It doesn't always happen and I cannot find any particular set of circumstances under which it occurs or does not occur.
I am merely responding to let you know that it happens to me as well and I have seen no way to correct it. I'm not so sure that there is a way to correct in in that it may have something to do with how the original text is formatted in the PDF or on the website and how it eventually "fits" into the text field or the area in which it is pasted. -
Audition crashes when I copy paste a file in the multitrack
Audition crashes when I copy paste a file in the multitrack. it says "audition has encountered a fatal error and needs to shut down"
yeah, sorry. Mac OSX 10.8.3
2.7 ghz intel core i5
8 gb RAM
Audition cs6
All the files I'm working with are mono wav files. As I kept trying to do other things I realized the program is crashing also when I try to export the mix.
Since this started happening last week I've tried reinstalling the software twice but that hasn't worked. Any help would be great. I don't want to have to spend 200 bucks for logic right now, but I am kind of in a rush to get this project done. I can also copy the crash report over here if neccesary.
Thank you! -
Did IOS8 upgrade w/iPhone5 / lost names associated when using e-mail - only displaying telephone numbers / what are the steps to correct to show names?
maybe OP want to extract all numbers from his inbox using regular expressions?
-
When I copy & paste a photo with rollover my rounded corner effects don't copy.
I am trying to copy & paste a square photo box with a style of rounded corners on top right and bottom left. The box has a tinted rollover effect with text that displays when the curser is over the box. I want to take this box and copy and paste several more exactly the same. When I try to copy & paste it, the corners of the box become rounded on all 4 corners and the corner effect button is disabled. Why is this happening?
Please try to drag the content from one page to another and then check.
Thanks,
Sanjit -
We have a w2008 R2 terminal server for a week now and clients make a vpn connection. They copy paste pictures from local to a Word 2010 document on the terminal server.
Everthing function well before. Same clients and a w2003 terminal server with Word 2010. Users copy local picture (openend in Paint, Microsoft Photo viewer, Irfanview, etc.) and than copy paste it to a Word document on the terminal server.
Now it does not work anymore accept when they opend it local in Paint. Only than they can copy the picture.
-I have checkt de properties on client
-I have restart rdpclip.exe on Termnal server.
-I have checked if it is a rights issue but it seems that it's not
I realy like to find a solution for this because doing it with MSPaint is al lot of work for the people.
Does any has a answer for this?
Your help will be appreciated.This one may help.
RDP
copy-and-paste not working
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Fields don't recognize their value has changed when a copy/paste value in inputed
I'm having a minor hiccup with my copy and paste buttons.
I have check boxes that, when checked, make other fields visible. The copy/paste actions recognize when the check box value is 1 and paste accordingly in the new instance of the subform, however, the invisible fields do not become visible, despite the check box value being 1 in the new instance. I feel like I'm missing something simple....possibly something that forces the scripting within the check box field to run since it is not recognizing that it's value has changed? If I manually click the check box in the new instance, the scripting works and the invisible fields become visible so I know its not an issue with creating new instances.
Any suggestions will be appreciated...I am new to this...
ScottStill interested in solving this issue....anyone? please?
-
When defining copy rules, only one source field allowed
Our users have requested the facility to allow them to copy pricing condition records when in in VK12 transaction. But when configuring the copy rules, we have come across the following problem:
When configuring copying rules for copying pricing condition records,
there is no possibility to use more than one source/target fields.
In our example, the condition table created for a certain pricing
access sequence contains keys such as Sales Organization, Sold-to Party
"and" Product Hierarchies level 1 to level 9 (e.g. PH1 - PH9) .
In the condition table definition, fields PH1 to PH9, although key
fields, are also defined as footer fields. This means that per sales
organization and sold-to party, we can create more than one condition
record based on different combinations of PH1 to PH9.
However when setting up copy rules for conditions in SPRO (SD -
Pricing Control - Copy Control for Conditions) to allow our users to copy the condition records, for a given Source /
Target table, the standard selection screen only allows us to define one Source / Target field.
In our case, this is not helpful. The configurator should be allowed
to select more than one source field (i.e. PH1 and PH2 and ..... PH9). At this moment,
we can only select as source field PH1 or PH2 or PH3., etc..
Steps for the Reconstruction:
- Run Spro.
- Select SD --> Pricing --> Pricing control --> Copy control for conditions -- > Copying rule for conditions
- Select 'New Entries'. Selection screen is displayed. The issue is that in this selection screen, the configurator is allowed to select only one source field. He should be allowed to select multiple fields.
Can you help us with this problem please?
Your help is much appreciated!
Edited by: C. Hassink on Feb 2, 2008 3:50 PM
Edited by: C. Hassink on Feb 2, 2008 3:52 PM
Edited by: C. Hassink on Feb 2, 2008 3:53 PM
Edited by: C. Hassink on Feb 2, 2008 3:55 PM
Edited by: C. Hassink on Feb 2, 2008 3:56 PMHi Ralph,
I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
What do you think of the following idea to solve the issue a totally different way:
All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
Regards
Robert -
When I Copy & Paste, what results in the Paste is NOT what I copied. With enough shaking, eventually a box appears saying "Undo Change attributes", which fixes it. HOW do I turn off "Change attributes" in iOS 5.1?
Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
thanks! -
My fills VANISH when i copy & paste frame...
I don't understand why. It is very frustrating.
Basically, I have to take a bunch of drawings (frames which were drawn and colored IN Flash CS4) and place them into a symbol so that the animation can be reused frequently. However, when I copy the frames to paste them into a new symbol, the color (fills) dissapears from random frames!
I tried using the copy frames method as well as the actual copying of the image and "pasting in place"... to no avail. No matter what I do fills arbitraily dissapear.
Is there any particular way to get around this or any reason why? I've never ever had this problem on Flash 2004 MX which is ancient.
Thanks in advance
-jAre you able to share this shape (or just copy it to a new file and link it to the forum)? I have seen stuff that sounds similar to this in the past that we've fixed, but it's very specific to the actual drawn shape, and we'd need to see it to figure out why it's happening.
Also, have you updated to 10.0.2? (there were some changes/fixes with drawing)
Thanks,
Jen. -
Why do I get 8004 error, when I use copy past command to transfer pictures from one USB drive to another ?
There is no problem if the second drive is empty.mumbles27 wrote:
one is MS-DOS
would that be in FAT32 or NTFS ?
mac OS extended (case sensitive)
i'm not 100 % sure but i have a fancy such a combination may not play well together.
nothing bigger than 2GB for one file
i was asking because FAT3 has a limitation in that it will not allow you to copy files larger than 4 GB.
JGG -
RoboHelp Crashes when I Copy & Paste Text then Amend the Pasted Text
I am copying text from one RoboHelp topic then pasting it into another RoboHelp topic (within the same project). If I then try to make a change to the pasted text RoboHelp crashes. This happens every single time so at least it is consistant!
Any suggestions/solutions?Bit weird but it seems to be playing ball now!
I copy/pasted text in the HTML editor and it works fine. Went back to the Wisiwig editor and tried it again, and it didn't crash.
Really weird, I must have consistently crashed the sytem over 20 times this morning, so no idea why it chooses to work now!
Thanks anyway, if it happens again I will reinstall RoboHelp and see if that is a long term cure.
Cheers,
Nicola
Maybe you are looking for
-
Brand new iMac 27 has no sound
A buddy just got a brand new iMac 27, out the box last night. It has no sound. He went to Systems Preferences and the Sound page provides no solution. Nothing can be clicked. I know the solution is probably insanely simple, but cannot figure it out.
-
How to make backwards navigation through slide shows possible?
Hi, I just made my first Encore DVD slide show and spent hours trying to figure out how to do this without a luck. The DVD is one Main Menu with buttons to different slide shows that are all set to manual advance. The end action of each slide show ta
-
Three times I have restored from a bookmarks json file and each time the bookmark folders display showing the new bookmarks but each time after I exit and restart FF4, the original bookmarks that were replaced by bookmarks from my json file reappear.
-
Cannot select things in Disc Repair
I did a verify disc in the Disc Utility and got this message: 2012-07-25 20:48:11 -0600: The volume Taylor's HD was found corrupt and needs to be repaired. 2012-07-25 20:48:11 -0600: Error: This disk needs to be repaired using the Recovery HD. Restar
-
Quality inspection stock for a vendor
Hi, When receiving material against PO for a vendor, stock should get posted always in quality inspection for this vendor. This requirement is only for particular vendor, not for all. If in material master, QM procurement key is active, then it will