When I create a new cube using another cube as template which datasource i

Hi,,
When I create  a new cube using another cube as template(copy) which datasource is assigned to the new cube, why because am getting all the fields which are there in copied cube even though I used only required fields.why this is occuring?
Thanx in advance,
Ravi

Hi,
Usually, when you copy the cube only data model is copied. means all KF and CHAR, NAV CHAR.
May be after copying you can reassign (CHARS) once again in the New cube as per your requirement.
When you create the update rules, there you can assign the Infosource or original cube as datasource.
may help...
Vis

Similar Messages

  • Is it possible to create a new List from another List's template and NOT carry over the associated Workflow?

    Related to
    this post, in cases where it's desirable to have two different workflows for two different Lists—is it possible to NOT bring forward a hardwired workflow when creating a new List from a saved template?
    I.e. List #2 still has the workflow from List #1 hardwired in.  List #1 still needs its workflow but List #2 wants to have a separate Workflow.

    More importantly, because it's relatively easy for most folks to just start from scratch with a new Workflow—how does one disassociate a carried-over Workflow from the new List?
    Use the web-GUI. (List Settings > Workflow Settings)
    From Designer, there's a shortcut button at the top of the page in the Workflows tab: "Administration Web Page".

  • When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

    When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
    All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
    I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
    Anyone know how I can do this? Thanks.

    Anyone?

  • When creating a new record in a list, I want to create a new record in another list, too, together with the ID of the first record

    OK, for anyone who has ever programmed a database, this one is easy. However, I am EXTREMELY limited. I work with SharePoint 365 (2013). I am pretty proficient in a number of programing languages, but I really don't know how to program SP. I wouldn't even
    know where to put code.
    Say, I have two lists: List A, with Items A1 (ID), A2, A3 and List B, with Items B1 (Lookup to A1), B2, B3. What I want this: When I create a new record in List A I want that also an empty record (except for the B:A1 item) is created. Is that possible without
    any major programing?

    you can create a workflow to achieve your requirement
    http://sharepoint.stackexchange.com/questions/50059/create-a-list-item-when-item-is-created-in-another-list
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

    Hi,
    I am using SCOM 2012 SP1
    I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the  Scope and Counters section. When I try to search for a particular object such as a
    port or interface it times out and returns an error. The error is shown below:
    Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
    Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
    produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
    Support Services for more information.
       at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
       at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
    languageCode, InstanceQueryOptions instanceQueryOptions)
       at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
       at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
    String typeWithIconPropertyName, Boolean propertyCollectionRequested)
       --- End of inner exception stack trace ---
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
       at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
    It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
    try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
    No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
    Has anyone else seen this issue? or can anyone explain what is happening?
    Many thanks

    Hi,
    Asposted earlier,hadt he same problem
    when creating a Dashboard widget type
    State.
    Ones olution I found for this was as follows:
    When creating the State widget,the option
    to specify the criterion I left blank
    and finished the creation of the dashboard.
    With that managed to solve the problem.Of course this
    is not the solution, or the root cause
    of the problem.
    I will examine more about this issue, and sohave
    the ultimate solution and why such behavior,I post
    here.
    thank you
    Wilsterman Fernandes

  • I use photoshop cs6 extended and when I create a new shortcut, it will work once and then disappear..any help on why this would happen

    I use photoshop cs6 extended and when I create a new shortcut, it will work once and then disappear..any help on why this would happen

    Sorry, no further idea what can cause this.
    Is the shortcuts file truely saved to disk? You can find in the user path, where the preferences and presets are stored for PS. Or if you go to the dialog again where you change shortcuts, is it reverted there too?

  • When I create a new folder, one of my existing folders in another location is being renamed to the new folder's name.

    This has happened twice in the past week. When I create a new folder nested inside two other existing folders, another folder in another branch is renamed to the newly-created folder's name. The folder that is being renamed is inside the Links folder. (I am not expecting an answer. I cannot find another place where I can report an issue with the browser.)

    See http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  • When I create a new address in Contacts the country is automatically coming in as Netherlands - though I'm using the phone in USA. Can't find how to change country default.

    When I create a new address in Contacts the country is automatically coming in as Netherlands - though I'm using the phone in USA. Can't find how to change country default.

    https://discussions.apple.com/message/16474985#16474985

  • Creating a new folder using a Database Link

    I'm trying to create a new folder from another database with Discoverer Administrator. The schema that I'm using is the same on each database but when I select the other database using the database link, Discoverer Administrator will get all the user accounts on the other database but if that user exists on the default database I will only see the objects owned for that user on the default database. If I select a user that is only on the remote database I will see the objects from the remote database. Is this a Bug? I was able to do this using Disco Admin 9.0.4 and EUL 5.02 on an Oracle 8i database. I just migrated my EUL to an Oracle 10g database using EUL 5.1.1 and Disco Admin 10.1.2.

    Yes this a bug, Bug No. 4324352 &Note:459996.1
    You follow this workaround
    After the Folder creation
    1. Choose Folder Properties (right-click on Folder)
    2. Change database from <default database> to <DBLINK>
    Thanks
    Mohamed

  • When to Create a New SC

    We have five applications to create this year, and a debate has arisen regarding how many SC's to create. Three of the applications relate to Operations; one to HR; one to IT. The three Operations applications are un-related to each other. When I read the documentation, it appears that we should be creating 5 SC's, one for each application, as none are related by functionality - they are NOT "functionally-related development objects". Development and implementation will take place at different times, as well.
    So, the question: how do we determine when to create a new SC? What are the rules or guidelines to follow?

    Dear Mark,
    Generally, the size of an SC u2013 that is the number of DCs it contains u2013 is not limited. The size
    does not even influence the speed of the build process, because the DCs are the units for the
    build process.
    One exception is the assembly process, in which the entire SC is built.
    In the following cases, you need more than one SC:
    1) The installation is carried out on different platforms.
    The J2EE part of your application is to be installed on the SAP NetWeaver and
    another part as a standalone client application.
    2) There are different delivery and maintenance cycles.
    You should not mix Portal Business packages you develop with applications,
    because the portal content is updated more often than the functions of the
    application.
    3) You use layered development
    A framework component should be developed and tested before the dependent
    part of the software.
    4) There are technical reasons.
    -You want to deliver some product parts together with the source files (to allow
    modifications) and others as archives only. The setting of whether to deliver SCs
    with or without source files is made in the CMS on the SC level.
    -You want to define different build variants for different groups of DCs.
    According me, your thought of creating 5 different SCs sounds logical.
    I hope my inputs will help you make your decision correctly.
    Regards,
    Shreyas Pandya

  • When I create a new song logic crashes

    When I create a new song logic crashes! I have to load another song, cancel all data and after I can work.
    Logic seems to get worse every day.
    I have repair permission, cancel logic preference, install, again logic, it's 15 years that I use Logic and I think that now it have a lot of bug.
    Emagic was another planet

    domani è un altra musica wrote:
    When I create a new song logic crashes! I have to load another song, cancel all data and after I can work.
    Logic seems to get worse every day.
    I have repair permission, cancel logic preference, install, again logic, it's 15 years that I use Logic and I think that now it have a lot of bug.
    Emagic was another planet
    Certainly a friendlier more communicative planet.
    Are you still using Snow Leopard 10.6.8 as your tagline says?
    If so, this fix may help.
    http://support.apple.com/kb/TS3968
    Follow it exactly, no more, no less.

  • When i create a new window, firefox Yanks me back to where i was and i dont want to be yanked back.

    i duplicate current pages by create new windows on a very frequent basis;
    to do this, i go to the top of the page that i want to duplicate and right-click and click on Open Link in New Window;
    I specifically want to duplicate the page i am on in another Window, not a new tab;
    Because
    Duplicating the current page to Open Link in New Tab, gives tabs on the top of my screen;
    Duplicating the current page to Open Link in New Window, gives 'tabs' on the bottom of my screen;
    I want 'tabs' to show on the bottom of my screen and to do that i have to Open Link in New Window;
    My question and What is happening, is that firefox is yanking me back to the page that i have just duplicated by right-clicking at the top of the page and clicking on Open Link in New Window;
    When i create the new Window, firefox yanks me back to the page that i just duplicated and i dont want to be yanked back to that page;
    I want to stay on the page that i just duplicated.
    I have tried changing the way tabs work in Options but nothing checked or unchecked results in the specific way i want to have new Windows open and STAY on that newly created Window and not be YANKED back to the window i duplicated.

    The original window did not have a Flash object, but does the window that hides itself contain a Flash object? That is the usual pattern for this bug in the plugin's protected mode feature.
    If you have not already tried disabling it, the following pages/posts provide different ways to do that:
    * Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
    * Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
    * Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078
    Flash needs to completely unload from memory (restarting Firefox might help) before this would take effect.
    More history: [https://support.mozilla.org/questions/955659 Opening New Windows and Shockwave Flash]

  • How can I set or reset the page that is loaded when I open a new tab using Ctrl t ?? by

    I recently downloaded a program that has, as an undesired additional action, apprently setup Yahoo as the page that opens by default when I open a new tab using <Ctrl> <t> (or the <+> symbol on the tab bar). This is aggravating to me, particularly as I have not been able to find a way to stop it occurring.
    I expect that it is buried somewhere in my profile, but I also have not found a way to explore or edit the contents of my profile.
    There is a JScript script file called "user" in ...\profiles\4g4vpust.default that I suspect is associated with the behaviour, but renaming it achieved nothing.
    Prior to this, my new tabs used to open as blank pages, i.e. did not load any URL and I was happy with that. How can I get back to that state?

    Did it add the freeze net assistant add-on? That add-on is known to do this. If you have that add-on you can uninstall it Firefox should revert to the default behavior.
    If you do not have that add-on, another add-on will be causing this, you can use the procedure in the following link to identify what one - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How to load a default prefereces when a create a new profile

    i need disable access for a urer creates a new profile in firefox. if it not possible block a profiler manager in firefox, other solution is when user create a new firefox profile, it load defaults preferences

    hello, probably the best solution in this case is to use the ''mozilla.cfg'' file to lock certain preferences - it will work regardless of which profile is used. for more information about how to implement it please see http://kb.mozillazine.org/Locking_preferences

  • Creating a New Layer Using Icons in Adjustment Palette

    When creating a new layer using the icons in the adjustments palette and holding ALT in CS5 a dialog box would appear before creating the new layer.  At this point you could rename the layer change the blending mode etc.
    In CS6 I do not get the dialog box to appear the new layer is just created.  I've tried to reset my preference twice and this has not help. Any ideas?

    JJMack wrote:
    Your memory has failed
    On the contrary, your memory may have failed.
    ACJ81 is correct (at least as far as Ps on OS X is concerned) and the problem was mentioned in the forum not too long ago. In CS5, Alt-clicking an icon in Adjustments panel does cause a New Layer dialog to pop open and the dialog fails to appear in CS6.
    In CS6 and CS5, the dialog will appear if you pick an Adj Lyr from the Layer > New Adjustment Layer submenu, both with or without Alt modifier. (That lack of control over the appearance of an optional dialog when picking from a menu is an inconsistency in the interface.)
    In CS6 and CS5, the dialog will appear if you Alt-click the black and white circle at bottom of Layers panel then pick an Adj Lyr from the menu, as Noel said.

Maybe you are looking for