When I create a new document in inches, with the ppi set to 300 in advanced settings, my document is still calculating at 72ppi. How do I change that?

Here are pictures of the issue I am talking about.
Pixel Problem - Imgur
When I try to create a document at 6in x 4in and ppi is set to 300, when i flip to pixels it should be 1800px x 1200px. But its not, it is calculating the dimensions at 72ppi. Why?!?

monkeyde,
You are getting entagled in the two confusing meanings of the term pixels, namely as a unit identical to points and equalling 1/72 inch, and the basic component of raster images (and effects).
You can read on in this very recent thread:
Is there a way to get Illustrator to know how many pixels are in an inch?

Similar Messages

When I create a new instrument it defaults to the EVP88 Electric Piano

Why is it everytime I start a new project and create a software instrument, or I add a new instrument to an existing song, it defauls to the EVP88 Electic Piano? It started doing this after I plugged in a USB controller keyboard so I would have to try and play keyboard parts on my iMacs keyboard. I called Applecare but my support for Logic has run out (I didn't use my Logic for a long time after installing it, logn story) so they wanted me to purchase a really expensive support package but I'm not a professinal just a regualr guy. The tech told me that it always defaults to EVP88 when yu create a new trick, bu I don't remember it doin that when I first statred. Please someone help me with this!!!

Hi
When you make a new track, un-check the "Open Library" checkbox.
CCT

When I create a new mailbox in mail.app, the mailbox does not appear in the list of mailboxes

I am trying to create a new mailbox in mail.app, but it never appears in the list of mailboxes. This USED TO WORK.

Without seeing anything of what you did there is not much to go on except to say that when you create a classic tween you use a library-based object and it has to exist at both ends of the tween. When motion guides come into play you usually have to fiddle around when making the link between the object and the motion guide to get the object to lock to it.

When I create a new chapter sometimes I get the chapter number with bullets on either side and sometimes I don't. I want to be constant. How do I consistently create bullets on both sides of the Chapter Number?

How do I create bullets on both sides of the Chapter Number? eg. Chapter One with bullets on either side.

K T
I originally started with a template but just erased all the content and built the book using blank pages. Sometimes when I add a chapter it comes up like the example below or it could come up without the bullets. For the life of me, I don't understand why.
Van Hunter
• Chapter Eight •

I need help. My three boys have brand new iPad mini's and I would like to set them up. I would like to create one new apple ID and have it shared by all three. This way they can share content (apps, music). How do I do that?

Looking for an information management solution. I have three boys that have brand new ipad mini's. I would like to set them up to manage information the easiest way.
My first thought was to use my apple ID for their apps and purchases. This would give me the advantage of seeing everything downloaded and be able to monitor this closely. The disadvantage to me, was that they would see all of my contracts, my apps, and my music.
My other thought was to create one new apple ID and to share that among the three boys. This way I would not have to worry about my information being on their ipads.
This is a very confusing situation for me. My goal is seperate my stuff from my kids stuff. Appreicate input from anyone who has in-depth experience with this as it applies to apple ID, icloud ID, and any detailed explaination of how to do this would be appreiciated. Thanks.

I think I will do this. I will use my apple ID and set face time and message to work independently. That solves one problrem. My other problem and maybe my bigger problem is that if I am using my apple ID, how do I iflter all of this so that my kids don't see my contacts, get my apps, etc. ?

How can I create a new game enter account with the same iTunes account

I Created a separate gamec enter account for my two sons, I'd like to create one for my wife but I can't find a way to do it under ios8 can somebody help? Thanks

Go to the System Preferences>Users.
Click the lock if and enter your password, if necessary.
Then click on the "+" symbol below the accounts list.
From the "New Account" menu, select"Administrator" and fill in the rest of the information.
And finally click the "Create Account" button.
Done. A new Administrator user account.

If I create a new Apple id account with the same bank details for a old Apple id account will I lose my old account?

My daughter has created a Apple Id account with my bank details and I have an Apple id account myself on her phone it's comimg up with "This Device Is Already Associated With an Apple ID. If you turn on Automatic Downloads with your Apple ID, you cannot auto-download or download past purchases with a different Apple ID for 90 days." Does this mean if she presses cancel or transfer will my account be affected in anyway.

I set up FaceTime and Messages on four different devices with only one Apple ID. I used the exact method that is described in the video that AnaMusic has provided to you in the link in her response above. That method worked fine for my family, but you can create new Apple ID's just to use for FaceTime and Messages if you like. Many users prefer doing that as opposed to adding new email addresses.
IMO - using unique email addresses (like in the video) makes sense, because we (my family) all have different email addresses anyway, and it was very simple to add each family members email address to both apps and remove my Apple ID email address as the contact address on each device.
BTW .... if you are using your Apple ID on both devices - your phone number should be the number that is showing in the settings - not you daughter's. Did you set up the Apps with your Apple ID?

When I type words into the http box I get Yahoo in German, and I want Google in English. How do I change that? (my IP address is in Germany)

I am on the run from Chrome, and have just installed Windows 7 (64bit version). I have the Google search box (top right) as well as the Navigation toolbar - if I type some words into the Nav Toolbar the options are given to me in Yahoo Germany, and I can find no way of changing that at all. I don't use Yahoo, and I want to go to a UK or a US site. No add-ons are enabled. The PC is in Germany (and therefore has a German IP address)

You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search
Some sites automatically redirect you to a site in the local language, based on where your IP locates you.
* Google: http://www.google.com/support/bin/answer.py?answer=873
* Yahoo!: http://help.yahoo.com/l/us/yahoo/homepage/homepage/basics/troubleshoot-02.html

When to Create a New SC

We have five applications to create this year, and a debate has arisen regarding how many SC's to create. Three of the applications relate to Operations; one to HR; one to IT. The three Operations applications are un-related to each other. When I read the documentation, it appears that we should be creating 5 SC's, one for each application, as none are related by functionality - they are NOT "functionally-related development objects". Development and implementation will take place at different times, as well.
So, the question: how do we determine when to create a new SC? What are the rules or guidelines to follow?

Dear Mark,
Generally, the size of an SC u2013 that is the number of DCs it contains u2013 is not limited. The size
does not even influence the speed of the build process, because the DCs are the units for the
build process.
One exception is the assembly process, in which the entire SC is built.
In the following cases, you need more than one SC:
1) The installation is carried out on different platforms.
The J2EE part of your application is to be installed on the SAP NetWeaver and
another part as a standalone client application.
2) There are different delivery and maintenance cycles.
You should not mix Portal Business packages you develop with applications,
because the portal content is updated more often than the functions of the
application.
3) You use layered development
A framework component should be developed and tested before the dependent
part of the software.
4) There are technical reasons.
-You want to deliver some product parts together with the source files (to allow
modifications) and others as archives only. The setting of whether to deliver SCs
with or without source files is made in the CMS on the SC level.
-You want to define different build variants for different groups of DCs.
According me, your thought of creating 5 different SCs sounds logical.
I hope my inputs will help you make your decision correctly.
Regards,
Shreyas Pandya

Pasteboard size is huge when I create a new document

When I create a new document or open an old document in InDesign CS4, the pasteboard is huge. For example creating an 8.5x11 document results in a pasteboard that is 36 inches wide buy 12 inches high. I have read all the solutions posed in other threads and none of them help restore the pasteboard to a reasonable size.
I typically create a document with 0,0,0,0 for margins. Minimum vertical offset for pasteboard in preferences in 1 in.
I uninstalled and reinstalled InDesign but the problem is still there. The problem is global (any and all documents i open).
Does anyone know why this is happening and how to fix it?

Are you sure facing pages wasn't selected when you created the document? How many pages are there?
The standard pasteboard dimension is 25.5" wide for non-facing 8.5" wide pages. As far as being a waste of space, you'd be surprised at how often you might need to move a page-wide object onto the pasteboard and still have the ability to see or edit the whole thing.
Peter

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.

Anyone?

When I create a new document the icon doesn't show up in the finder

When I create a new document and close it the icon is not visible in the finder until I do a search. Then it shows up. I can't move it to other locations.

So where have you saved it to?
When you search for a file that is a search result not actually a folder.
The real location of the file should be shown in a chain of nested folders along the bottom of that window and you can open the folder that the file is in by double clicking on the enclosing folder's icon.
You need to pay attention to where you are saving files or you will have trouble opening the correct one later.
If you are new to the Mac go to http://www.apple.com/support/mac101/
If you have come from Windows the method of saving, finding and organising files is not too dissimilar.
Peter

When i create a new project, my application cannot find textLayout_1.0.595, is this a bug??

hey guys, so this is the second time this has happened, im not sure what i did the first time to fix the error but when i create a new project and create a textinput box in there, i get the following error,
"SecurityError: Error #2148: SWF file file:///Users/tkanagala/web projects/flex 4/podcast/bin-debug/podcast.swf cannot access local resource file:///Users/tkanagala/web%20projects/flex%204/podcast/bin-debug/textLayout_1.0.0.595.sw f. Only local-with-filesystem and trusted local SWF files may access local resources."
any ideas why??

I get the same error. This isn't something you should have to update a policy file for - it seems like a flash builder error in the way it generates the library swf. The steps I took were:
- create a new application
- type some basic demo app code or paste in code. In my situation I pasted in some charting examples from the docs (appended to the end)
- click "run"
- the error appears:
SecurityError: Error #2148: SWF file file://localhost/Users/rj.owen/Documents/ProjectFiles/TIAA-CREF/code/tiaa-eii/production/ ChartingTests/bin-debug/ChartingTests.swf cannot access local resource file://localhost/Users/rj.owen/Documents/ProjectFiles/TIAA-CREF/code/tiaa-eii/production/ ChartingTests/bin-debug/textLayout_1.0.0.595.swf. Only local-with-filesystem and trusted local SWF files may access local resources.
at flash.net::URLStream/load()
I'll go post on JIRA as well.
the code I used was:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
<fx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
[Bindable]
public var stockDataAC:ArrayCollection = new ArrayCollection( [
{date: "2005, 7, 27", close: 41.71},
{date: "2005, 7, 28", close: 42.21},
{date: "2005, 7, 29", close: 42.11},
{date: "2005, 8, 1", close: 42.71},
{date: "2005, 8, 2", close: 42.99},
{date: "2005, 8, 3", close: 44} ]);
public function myParseFunction(s:String):Date {
// Get an array of Strings from the comma-separated String passed in.
var a:Array = s.split(",");
// Create the new Date object. Subtract one from
// the month property because months are zero-based in
// the Date constructor.
var newDate:Date = new Date(a[0],a[1]-1,a[2]);
return newDate;
]]>
</fx:Script>
<mx:Panel title="DateTimeAxis Example" height="100%" width="100%">
<mx:LineChart id="mychart" height="100%" width="100%"
paddingRight="5" paddingLeft="5"
showDataTips="true" dataProvider="{stockDataAC}">
<mx:horizontalAxis>
<mx:DateTimeAxis dataUnits="days" parseFunction="myParseFunction"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:LinearAxis baseAtZero="false" />
</mx:verticalAxis>
<mx:series>
<mx:LineSeries yField="close" xField="date" displayName="AAPL"/>
</mx:series>
</mx:LineChart>
</mx:Panel>
</s:Application>

When I create a new folder on the desktop of my macbook pro, it is automatically populated with all of the files on the desktop, which I don't want.

when I create a new folder on the desktop of my macbook pro, it is automatically populated with all of the files on the desktop, which I don't want.

I got the problem solved. It was pretty simple but new to me. I had evidently inadvertently switched the setting in the "View" tab on the dropdown menu so that all of my desktop folders were populated by all folders/documents residing on the desktop.
The solution was to open one of the folders, then go to the "View" tab and change the setting to "List." Presto, now all the folders include only the contents I had intentionally loaded into them.

When I create a new polygon with applescript in in design cs4, I want to make a drop shadow

when I create a new polygon with applescript in in design cs4, I want to make a drop shadow
Is it possible?
I am working with MAC OS 10.6.7 and CS4
Can somebody help me?

Adding a drop shadow should work fine regardless of shape… As Im a big fan of using styles everywhere I can…
tell application "Adobe InDesign CS5"
activate
tell the active document
set GotNoStyle to make new object style
set properties of drop shadow settings of fill transparency settings of GotNoStyle to ¬
{mode:drop, distance:3, angle:135, spread:0, blend mode:multiply, opacity:50, honor other effects:true, x offset:3, y offset:3, knocked out:true, use global light:false}
set SomeFill to the last swatch
tell the first page
make new rectangle with properties ¬
{fill color:SomeFill, geometric bounds:{10, 10, 30, 30}}
apply object style (the result) using GotNoStyle without clearing overrides
make new oval with properties ¬
{fill color:SomeFill, geometric bounds:{10, 40, 30, 70}}
apply object style (the result) using GotNoStyle without clearing overrides
end tell
end tell
end tell
You can then edit the object style to make global changes… Sorry my values were for my euro metric head…

When I create a new document in inches, with the ppi set to 300 in advanced settings, my document is still calculating at 72ppi. How do I change that?

Similar Messages

Maybe you are looking for