When I create a new event how do I select a video on iPhoto to import into the event.

I am using iMovie 10.0.5. I create a new event and I want to import a video which I can only find on iPhoto. I then have to open iPhoto and it loads everything rather than just the one video I want. Is there a better way of doing this does anyone know. Thanks

Try this link from iMovie 10 Help
http://help.apple.com/imovie/mac/10.0/#mov865570171

Similar Messages

  • When I create a calendar on my mac it automatically syncs with my iPhone but none of the events on that calendar sync with my phone. How do I fix this?

    When I create a calendar on my macbook it automatically syncs with my iPhone, but none of the events on that calendar sync with my iPhone. How do you fix this and make it so everything syncs.

    Using iCoud?
    On the iPhone tap Settings > iCloud
    Make sure Calendars is switched ON.

  • When I create a new mailbox, it does not appear in alphabetial order.  It appears at the bottom and I have to manipulate it to get it in its proper place.  This apparently started when I upgraded to Mountain Lion.  Any ideas?

    Do you know why new mailboxes I create do not appear in alphabetical order?  They appear below all other mailboxes and I have to manipulate them into their proper place.  This apparently started when I upgraded to Mountain Lion.  Any help would be much appreciated, as it's annoying and time consuming.

    Do you know why new mailboxes I create do not appear in alphabetical order?  They appear below all other mailboxes and I have to manipulate them into their proper place.  This apparently started when I upgraded to Mountain Lion.  Any help would be much appreciated, as it's annoying and time consuming.

  • How do I get a video from DropBox to import into my iPhoto library?

    I have tried to by dragging it from my desktop but it says 'unrecognised format'. Please help!

    Depending on your interface, you may be able to shut off your speakers there. Hopefully you are working with powered speakers. The fastest way is just to turn off the speakers themselves and switch to the earphone setting on the interface.

  • Recently, when I create a new album (untitled), it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

    Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

    When a new album is created it will fill with whatever is in the right hand window,  If you're in the Events or Photos mode it will contain all photos in the library.  Yes, strange behavior.
    OT

  • When I create a new cube using another cube as template which datasource i

    Hi,,
    When I create  a new cube using another cube as template(copy) which datasource is assigned to the new cube, why because am getting all the fields which are there in copied cube even though I used only required fields.why this is occuring?
    Thanx in advance,
    Ravi

    Hi,
    Usually, when you copy the cube only data model is copied. means all KF and CHAR, NAV CHAR.
    May be after copying you can reassign (CHARS) once again in the New cube as per your requirement.
    When you create the update rules, there you can assign the Infosource or original cube as datasource.
    may help...
    Vis

  • How do I select part of a clip to import in Final Cut Pro 10.0.7?

    Greetings. I'm a newby in FCPX.  I've been watching Michael Wohl's tutorial and it looks like I should be able to mark parts of clips stored on my HD to import into the event browser.  But I don't seem to be able to mark the clips with either the "i o " keys or dragging.  Only the full length clip can be selected. Is this feature diabled in 10.0.7  or am I missing something?  I also don't seem to have the film strip/list icons at the bottom of the Media Import window.  thanks!

    This capability only exists when importing from a camera card or camera archive.
    You can't select part of a clip to import from a hard drive movie file.

  • When I create a new event in my calendar in my local time zone, my invitees receive it in GMT. Why how can this be fixed?

    When I create a new event in my calendar in my local time zone, my invitees receive it in GMT. Why how can this be fixed?

    Greetings jsubacus,
    Welcome to the Apple Support Communities!
    I understand that your calendar events are appearing in GMT on your calendar in Yosemite. This was a fix in iOS 8.2 for iCloud calendars. I would suggest that you make sure all of your devices are updated to the current software release to help resolve the issue. 
    iOS 8.2
     Fixes a timezone issue where Calendar events appear in GMT
    Cheers,
    Joe

  • When I create a new event, 3 alarms are automatically set. How can I set the default to zero alarms?

    What I said above - when I set up a new event three default alarms are set, all for 10 minutes prior to the event. How can I make the default alarm free?
    Thanks!
    Mark

    Hi Mark,
    Do you have a default alarm set in iCal's Preferences > General Tab?
    Are you syncing via iCloud (if so look here)?
    Are you syncing to Google Calendar (if so look here)?
    Are you syncing elsewhere?
    Best wishes
    John M

  • When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

    When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
    All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
    I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
    Anyone know how I can do this? Thanks.

    Anyone?

  • How do I get rid of the auto signature "sent from my iPhone" when I create a new message?

    how do I get rid of the auto signature "sent from my iPhone" when I create a new message?

    Settings -> Mail -> Signature and edit it to whatever you'd like.

  • How to load a default prefereces when a create a new profile

    i need disable access for a urer creates a new profile in firefox. if it not possible block a profiler manager in firefox, other solution is when user create a new firefox profile, it load defaults preferences

    hello, probably the best solution in this case is to use the ''mozilla.cfg'' file to lock certain preferences - it will work regardless of which profile is used. for more information about how to implement it please see http://kb.mozillazine.org/Locking_preferences

  • When I create a new contact on my iPhone 5, despite having all my devices connected to iCloud, the contact does not appear anywhere else. Please can you let me know how to solve this?

    When I create a new contact on my iPhone 5 it does not appear on any of my other devices (iPad, PC).

    '''''#This will fix the problem for most I think:'''''
    ''Firefox 4.0 has a new feature that automatically saves your tabs when you close Firefox.''
    Its seems that for many people, this feature was not enabled automatically, instead it is set on a different setting of 'show my homepage' or 'show a blank page'. But it is very easy to change, I just did it myself! Here is how to do it:
    At the top left of the screen is an orange 'Firefox' box, click on it. On the right of the dropdown menu you will see 'Options'. Click on it. Then you will see another 'Options', click on it. This will bring up the Options menu.
    The part we are interested in for this fix is where it says, 'When FireFox starts:'. There is a dropdown selection next to that sentance, click on the little down-arrow, and choose ' Show my windows and tabs from last time'. Then click on 'OK' at the bottom of the Options menu, this will close the menu.
    You should be sorted now, I was. I hope it works for you too. To test it out, have a few tabs open, and close firefox. Then try open it. Those same tabs should re-appear. Holding thumbs & fingers crossed :)

  • How can I modify the email who is send when I create a new user in EP6

    Hi community,
    I have a question. How can I change the text of the email which is automatically send by the EP6/WAS6.40 when I create a new user. The email displays the message "Dear Sir or Madam, your user xzy was created with the following password xxx."
    How can I modify this text. Where is it located in the Enterprise Portal / WEBAS 6.40 .
    Thank you.
    Best Regards,
    Olaf Reiss

    Hi,
    Here you can find the required steps on how to change the texts of notification emails:
    http://help.sap.com/saphelp_nw04/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm
    Good luck,
    René

  • When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
    (PS Everybody please make noise on this one so apple comes up with a solution.)
    < Edited by Host >

Maybe you are looking for

  • File dialog (Save, Open, Export, etc.) does not appear in Firefox

    Hello, I am having a very similar problem to the one described in this link ... https://support.mozilla.org/en-US/questions/990487?esab=a&as=aaq ... and I can provide some additional information. In my case, the issue is not isolated to saving a file

  • How to restore my secret question?

    how to restore my secret question?

  • Digital copy of my signature onto documents?

    hi there, i'm looking for a programme for the MAC whereby i can have an electronic version of my personal signature that can be "copied/scanned" on to documents - so as to appear as if i have signed a document and scanned it. Anyone point me in a goo

  • How to use portrait still photos in Premier Pro CS4

    I am new to Premier Pro and want to insert a bunch of still photos into a video I am making of a recent vacation.  A lot of the photos have a portrait orientation, and when I import them into Premier Pro, they are automatically turned to landscape. 

  • Partition corrupted after Bootcamp Installation aborted

    Hello, I started a Bootcamp installation on my OSX Lion Mac Pro. Once I realized that I could only use Windows 7, I had to hold off on the installation until I located my Windows 7 disk. I had set the Bootcamp partition size to 100 GB on a 500 GB Dri