When I create a new instrument it defaults to the EVP88 Electric Piano

Why is it everytime I start a new project and create a software instrument, or I add a new instrument to an existing song, it defauls to the EVP88 Electic Piano? It started doing this after I plugged in a USB controller keyboard so I would have to try and play keyboard parts on my iMacs keyboard. I called Applecare but my support for Logic has run out (I didn't use my Logic for a long time after installing it, logn story) so they wanted me to purchase a really expensive support package but I'm not a professinal just a regualr guy. The tech told me that it always defaults to EVP88 when yu create a new trick, bu I don't remember it doin that when I first statred. Please someone help me with this!!!

Hi
When you make a new track, un-check the "Open Library" checkbox.
CCT

Similar Messages

When I create a new mailbox in mail.app, the mailbox does not appear in the list of mailboxes

I am trying to create a new mailbox in mail.app, but it never appears in the list of mailboxes. This USED TO WORK.

Without seeing anything of what you did there is not much to go on except to say that when you create a classic tween you use a library-based object and it has to exist at both ends of the tween. When motion guides come into play you usually have to fiddle around when making the link between the object and the motion guide to get the object to lock to it.

When I create a new chapter sometimes I get the chapter number with bullets on either side and sometimes I don't. I want to be constant. How do I consistently create bullets on both sides of the Chapter Number?

How do I create bullets on both sides of the Chapter Number? eg. Chapter One with bullets on either side.

K T
I originally started with a template but just erased all the content and built the book using blank pages. Sometimes when I add a chapter it comes up like the example below or it could come up without the bullets. For the life of me, I don't understand why.
Van Hunter
• Chapter Eight •

When I create a new document in inches, with the ppi set to 300 in advanced settings, my document is still calculating at 72ppi. How do I change that?

Here are pictures of the issue I am talking about.
Pixel Problem - Imgur
When I try to create a document at 6in x 4in and ppi is set to 300, when i flip to pixels it should be 1800px x 1200px. But its not, it is calculating the dimensions at 72ppi. Why?!?

monkeyde,
You are getting entagled in the two confusing meanings of the term pixels, namely as a unit identical to points and equalling 1/72 inch, and the basic component of raster images (and effects).
You can read on in this very recent thread:
Is there a way to get Illustrator to know how many pixels are in an inch?

When I create a new document the icon doesn't show up in the finder

When I create a new document and close it the icon is not visible in the finder until I do a search. Then it shows up. I can't move it to other locations.

So where have you saved it to?
When you search for a file that is a search result not actually a folder.
The real location of the file should be shown in a chain of nested folders along the bottom of that window and you can open the folder that the file is in by double clicking on the enclosing folder's icon.
You need to pay attention to where you are saving files or you will have trouble opening the correct one later.
If you are new to the Mac go to http://www.apple.com/support/mac101/
If you have come from Windows the method of saving, finding and organising files is not too dissimilar.
Peter

When to Create a New SC

We have five applications to create this year, and a debate has arisen regarding how many SC's to create. Three of the applications relate to Operations; one to HR; one to IT. The three Operations applications are un-related to each other. When I read the documentation, it appears that we should be creating 5 SC's, one for each application, as none are related by functionality - they are NOT "functionally-related development objects". Development and implementation will take place at different times, as well.
So, the question: how do we determine when to create a new SC? What are the rules or guidelines to follow?

Dear Mark,
Generally, the size of an SC u2013 that is the number of DCs it contains u2013 is not limited. The size
does not even influence the speed of the build process, because the DCs are the units for the
build process.
One exception is the assembly process, in which the entire SC is built.
In the following cases, you need more than one SC:
1) The installation is carried out on different platforms.
The J2EE part of your application is to be installed on the SAP NetWeaver and
another part as a standalone client application.
2) There are different delivery and maintenance cycles.
You should not mix Portal Business packages you develop with applications,
because the portal content is updated more often than the functions of the
application.
3) You use layered development
A framework component should be developed and tested before the dependent
part of the software.
4) There are technical reasons.
-You want to deliver some product parts together with the source files (to allow
modifications) and others as archives only. The setting of whether to deliver SCs
with or without source files is made in the CMS on the SC level.
-You want to define different build variants for different groups of DCs.
According me, your thought of creating 5 different SCs sounds logical.
I hope my inputs will help you make your decision correctly.
Regards,
Shreyas Pandya

I've deleted some contacts, but when I create a new text it will still suggest the deleted contact. I want that to stop.

I've deleted some contacts but when I create a new message it still suggests the deleted contact. How do I permanently delete that information?

Restoring should not be the only solution !
Apple should work on fixing this issue.
The option is available when u email,
A blue arrow appears and when u click it,
It asks if u want to remove it permanently
So i think the phone # after u send a sms/text
Should be able to be deleted at will.
Apple team get to work ! Lol
Thnks

How to load a default prefereces when a create a new profile

i need disable access for a urer creates a new profile in firefox. if it not possible block a profiler manager in firefox, other solution is when user create a new firefox profile, it load defaults preferences

hello, probably the best solution in this case is to use the ''mozilla.cfg'' file to lock certain preferences - it will work regardless of which profile is used. for more information about how to implement it please see http://kb.mozillazine.org/Locking_preferences

When I create a new address in Contacts the country is automatically coming in as Netherlands - though I'm using the phone in USA. Can't find how to change country default.

When I create a new address in Contacts the country is automatically coming in as Netherlands - though I'm using the phone in USA. Can't find how to change country default.

https://discussions.apple.com/message/16474985#16474985

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.

Anyone?

BUG: Access Connect Abort, when I create a new network profile.

Where can I report bugs?
My system is windows xp sp2 on X60.
I have been using AC-4.42(Access Connection) for a long time. And before, there is no problem when I added new network profile into it.
But yesterday, I wanted to add a new profile into it. I opened the "create profile" window and input the name of the new profile (I have two network adapters, wired and wireless. So by default, the both are selected. And I left the default selection unchanged.), then "Next". The 2nd window is about wireless config, I configured everything, then go on "Next", at this moment, an error occured and AC aborted with four error windows. The titles of those windows are "ACMainGUI.exe error" and "ACMainGUIWnd: ACMainGUI.exe".
Then I did it again, I opened the "create profile" window, and this time, in this (1st) window, I changed the selection of network adapter, besides inputing the name of the new profile. I only selected the wired adapter, and then "Next". Sadly, this time the 2nd(next) window did not appear(pop up) at all. Instead, those four error windows poped up one by one. AC aborted again.
I repeated the above operations many times, and everytime, AC aborted.
So I went to the online "support and download" to look for some updates about AC. And I found AC-4.52 with luck. After downloading and installing, unfortunately the problem still exists. AC-4.52 still aborts when I create a new network profile.
So now, what to do. I have no ways. I am expecting the developers could note this problem and fix it and give me a newer update as soon as possible.
Sigh...

I have exactly the same issue. Next to the actions mentioned by ixbm I have also fully uninstalled and reinstalled the AC-4.52, but this didn't help.
Any idea on how to solve, installing older version?
regards,
Bart

When I create a new tab, firefox shows a new window.

When I create a new tab, Firefox shows a new window. Please tell me to solve this problem.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You should update your outdated Shockwave Flash 10.3 r181 plugin.
*https://www.mozilla.org/plugincheck/
You can find the latest Flash player versions for Firefox on this page:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

Look at it this way: there is no need to record that effect onto the audiofile. This is a great advantage of modern recording, and this is how most DAW's work by default. Just leave the plugin on when playing back.
Only for CPU management reasons it may be advantageous in certain situations to either freeze a track or bounce it in place (both techniques will render an audiofile that may include the effect). But in general it is a (very) good thing that it is possible to tweak any effect after recording, and have a clean, unprocessed recorded signal to work with. And if the effect was perfect at the time of recording, well, just leave the plugin(s) engaged.
http://help.apple.com/logicpro/mac/10.1/#/lgcp8ae5826e
http://help.apple.com/logicpro/mac/10.1/#/lgcpf1cbfd51
ps: there is a way to record plugin effected signal live into the audiofile, but it involves creating a custom environment setup.

How do I get rid of the auto signature "sent from my iPhone" when I create a new message?

how do I get rid of the auto signature "sent from my iPhone" when I create a new message?

Settings -> Mail -> Signature and edit it to whatever you'd like.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

When I create a new instrument it defaults to the EVP88 Electric Piano

Similar Messages

Maybe you are looking for