When i create a new model i dont see any tools Compose model Panel
Hi,
Trying to build my first Model but when i create a new model i dont see any tools Compose model Panel.
Any Ideas?
Thanks.
Tomi
Hi,
Version:702.8.0.1
Yes i can create a model and i can see the browse, compose,configure, inspect, find data and deploy buttons on the right
when i click "Compose" i should see tools in the box that loads right beside it but i dont. Its blank
Regards
Tomi
Similar Messages
-
When i create a new window, firefox Yanks me back to where i was and i dont want to be yanked back.
i duplicate current pages by create new windows on a very frequent basis;
to do this, i go to the top of the page that i want to duplicate and right-click and click on Open Link in New Window;
I specifically want to duplicate the page i am on in another Window, not a new tab;
Because
Duplicating the current page to Open Link in New Tab, gives tabs on the top of my screen;
Duplicating the current page to Open Link in New Window, gives 'tabs' on the bottom of my screen;
I want 'tabs' to show on the bottom of my screen and to do that i have to Open Link in New Window;
My question and What is happening, is that firefox is yanking me back to the page that i have just duplicated by right-clicking at the top of the page and clicking on Open Link in New Window;
When i create the new Window, firefox yanks me back to the page that i just duplicated and i dont want to be yanked back to that page;
I want to stay on the page that i just duplicated.
I have tried changing the way tabs work in Options but nothing checked or unchecked results in the specific way i want to have new Windows open and STAY on that newly created Window and not be YANKED back to the window i duplicated.The original window did not have a Flash object, but does the window that hides itself contain a Flash object? That is the usual pattern for this bug in the plugin's protected mode feature.
If you have not already tried disabling it, the following pages/posts provide different ways to do that:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078
Flash needs to completely unload from memory (restarting Firefox might help) before this would take effect.
More history: [https://support.mozilla.org/questions/955659 Opening New Windows and Shockwave Flash] -
I own osx mountain lion with messages.When i go to create a new message i dont undrestand why you can send it to their email.also is it possible to send a message from my mac to another mac that has mountain lion.
MacBook, OS X Mountain Lion, help meThe recipient needs to have Messages set up with the e-mail. Check the image below:
Hope it heps.
JP -
When I create a new cube using another cube as template which datasource i
Hi,,
When I create a new cube using another cube as template(copy) which datasource is assigned to the new cube, why because am getting all the fields which are there in copied cube even though I used only required fields.why this is occuring?
Thanx in advance,
RaviHi,
Usually, when you copy the cube only data model is copied. means all KF and CHAR, NAV CHAR.
May be after copying you can reassign (CHARS) once again in the New cube as per your requirement.
When you create the update rules, there you can assign the Infosource or original cube as datasource.
may help...
Vis -
When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.Anyone?
-
How do I get rid of the auto signature "sent from my iPhone" when I create a new message?
how do I get rid of the auto signature "sent from my iPhone" when I create a new message?
Settings -> Mail -> Signature and edit it to whatever you'd like.
-
I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X -
Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?
When a new album is created it will fill with whatever is in the right hand window, If you're in the Events or Photos mode it will contain all photos in the library. Yes, strange behavior.
OT -
how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.
If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
if ims is {} then return {}
if (length of ims is 1) then return {}
if i < 2 then return rest of ims
if (i = length of ims) then return (items 1 thru (i - 1) of ims)
if i > (length of ims) then return ims -- should be error?
return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
local numitems, ims_shuffled, nextrest, nextpick, i
set numitems to length of ims
if length of ims < 2 then return ims
set ims_shuffled to {}
set nextrest to ims
repeat until nextrest is {}
set i to (random number (numitems - 1)) + 1
set nextpick to item i of nextrest
set beginning of ims_shuffled to nextpick
set numitems to numitems - 1
set nextrest to removeItem(nextrest, i)
end repeat
return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
local imageSel, shuffled, i
tell application "Aperture"
activate
set imageSel to (get selection)
set shuffled to my shuffle_items(imageSel)
set fullscreen to true
if imageSel is {} then error "Please select some images."
repeat with i from 1 to count of shuffled
reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
end repeat
set fullscreen to false
return shuffled
end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
tell library 1
if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
end if
end tell
And to add the images from the shuffled list to the album:
repeat with i from 1 to count of shuffled
duplicate item i of shuffled to album "shuffledAlbum"
end repeat
Regards
Léonie -
How to load a default prefereces when a create a new profile
i need disable access for a urer creates a new profile in firefox. if it not possible block a profiler manager in firefox, other solution is when user create a new firefox profile, it load defaults preferences
hello, probably the best solution in this case is to use the ''mozilla.cfg'' file to lock certain preferences - it will work regardless of which profile is used. for more information about how to implement it please see http://kb.mozillazine.org/Locking_preferences
-
When I create a new document the icon doesn't show up in the finder
When I create a new document and close it the icon is not visible in the finder until I do a search. Then it shows up. I can't move it to other locations.
So where have you saved it to?
When you search for a file that is a search result not actually a folder.
The real location of the file should be shown in a chain of nested folders along the bottom of that window and you can open the folder that the file is in by double clicking on the enclosing folder's icon.
You need to pay attention to where you are saving files or you will have trouble opening the correct one later.
If you are new to the Mac go to http://www.apple.com/support/mac101/
If you have come from Windows the method of saving, finding and organising files is not too dissimilar.
Peter -
Pasteboard size is huge when I create a new document
When I create a new document or open an old document in InDesign CS4, the pasteboard is huge. For example creating an 8.5x11 document results in a pasteboard that is 36 inches wide buy 12 inches high. I have read all the solutions posed in other threads and none of them help restore the pasteboard to a reasonable size.
I typically create a document with 0,0,0,0 for margins. Minimum vertical offset for pasteboard in preferences in 1 in.
I uninstalled and reinstalled InDesign but the problem is still there. The problem is global (any and all documents i open).
Does anyone know why this is happening and how to fix it?Are you sure facing pages wasn't selected when you created the document? How many pages are there?
The standard pasteboard dimension is 25.5" wide for non-facing 8.5" wide pages. As far as being a waste of space, you'd be surprised at how often you might need to move a page-wide object onto the pasteboard and still have the ability to see or edit the whole thing.
Peter -
I need to create a Notification in CRM WebUI When we create a new contract
Hi Experts,
I am working in Utility Industry and as per the business requirement I need to create a Notification in CRM WebUI
When we create a new contract & click on apply button.
As per my knowledge we are not maintaining Notification information in CRM System. So could you please
help me to call IW52 during the new contract creation when we click on apply button.
Thanks
RoliHello Roli,
If your requirement is to launch Transaction IW52 after clicking apply button then you can use Transaction Launcher tool in CRM to integrate to CRM WebClient UI.
Calling Transaction Launcher on user action
BOR object or ITS based Transaction Launcher
Regards,
Ashik -
When I create a new photo album in Iphoto it adds all my photos in the library
I love my macbook pro but still not fully understanding Iphoto. When I create a new photo album and drag photos over from a disk it seems to add all photos from my library. When I remove them it removes them from all the albums. HELP!
Add the photos from your disc to iPhoto, then drag them from the iPhoto Event or photos to the Album.
You can delete photos from the Album without removing them from the computer. If you delete them in the Photos or Events area, they are removed from iPhoto, therefore taking them out of the Album.
The photos have to be in iPhoto to exist in an Album. They cannot exist in an Album and not be in iPhoto..
Hope that helps... -
When i create a new project, my application cannot find textLayout_1.0.595, is this a bug??
hey guys, so this is the second time this has happened, im not sure what i did the first time to fix the error but when i create a new project and create a textinput box in there, i get the following error,
"SecurityError: Error #2148: SWF file file:///Users/tkanagala/web projects/flex 4/podcast/bin-debug/podcast.swf cannot access local resource file:///Users/tkanagala/web%20projects/flex%204/podcast/bin-debug/textLayout_1.0.0.595.sw f. Only local-with-filesystem and trusted local SWF files may access local resources."
any ideas why??I get the same error. This isn't something you should have to update a policy file for - it seems like a flash builder error in the way it generates the library swf. The steps I took were:
- create a new application
- type some basic demo app code or paste in code. In my situation I pasted in some charting examples from the docs (appended to the end)
- click "run"
- the error appears:
SecurityError: Error #2148: SWF file file://localhost/Users/rj.owen/Documents/ProjectFiles/TIAA-CREF/code/tiaa-eii/production/ ChartingTests/bin-debug/ChartingTests.swf cannot access local resource file://localhost/Users/rj.owen/Documents/ProjectFiles/TIAA-CREF/code/tiaa-eii/production/ ChartingTests/bin-debug/textLayout_1.0.0.595.swf. Only local-with-filesystem and trusted local SWF files may access local resources.
at flash.net::URLStream/load()
I'll go post on JIRA as well.
the code I used was:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
<fx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
[Bindable]
public var stockDataAC:ArrayCollection = new ArrayCollection( [
{date: "2005, 7, 27", close: 41.71},
{date: "2005, 7, 28", close: 42.21},
{date: "2005, 7, 29", close: 42.11},
{date: "2005, 8, 1", close: 42.71},
{date: "2005, 8, 2", close: 42.99},
{date: "2005, 8, 3", close: 44} ]);
public function myParseFunction(s:String):Date {
// Get an array of Strings from the comma-separated String passed in.
var a:Array = s.split(",");
// Create the new Date object. Subtract one from
// the month property because months are zero-based in
// the Date constructor.
var newDate:Date = new Date(a[0],a[1]-1,a[2]);
return newDate;
]]>
</fx:Script>
<mx:Panel title="DateTimeAxis Example" height="100%" width="100%">
<mx:LineChart id="mychart" height="100%" width="100%"
paddingRight="5" paddingLeft="5"
showDataTips="true" dataProvider="{stockDataAC}">
<mx:horizontalAxis>
<mx:DateTimeAxis dataUnits="days" parseFunction="myParseFunction"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:LinearAxis baseAtZero="false" />
</mx:verticalAxis>
<mx:series>
<mx:LineSeries yField="close" xField="date" displayName="AAPL"/>
</mx:series>
</mx:LineChart>
</mx:Panel>
</s:Application>
Maybe you are looking for
-
First off, my computer had to be wiped clean back in early January. All my programs was gone and that included my CS6 program. So I re-installed them. Then one day, I see this Adobe update and it had the Adobe Creative Cloud App. I think I did someth
-
Shared versus dedicated connections in the fragmentation of shared pool mem
Hi, I have a old Oracle 8.1.7 database server. I have a legacy application with no source code. This application don't use memory efficiently (no bind variables, etc.) , ie memory becomes fragmented. I know that exists two ways to connect the databas
-
Now that I have the most recent version of I Tunes, I cannot print jewel cases. The song titles print over themselves. Can anyone help?
-
ITunes will not recognize my Recently Played music from my iPod
I recently upgraded to iTunes 7 and I also upgraded my iPod as well to 1.2. I've been having problems with my iTunes not keeping track of the recently played tracks. If I look into my ipod history via iTunes it doesn't list any recently played tracks
-
Blank column in spread sheet when i am downloading?
hai fnds...any one help for the below issue i have developed ALV report used ( layout also in that ).displaying 19 fields in the output. but when i am downloading spread sheet iam getting one blank column in spread sheet.(but all 19 fields are co