When I create a PDF from Excel, there are blank cells in Excel document, when they convert to PDF the blank cells have data in them?

There are cells in the excel document that have formula's in them.  The formulas are pulling data from other blank cells, so that is why they are blank in the formulated cells.  So in Excel, they are just a dash.  When I create the PDF, the document gets opened in Acrobat and the once blank cells have data in them.  Not sure why there is data in those fields on the PDF if its blank on Excel.

Not really sure that I fixed the problem, but I did find a work around and wanted to post it if someone else runs across the same issue. Apparently the document creator used lots of custom rules and shading. If I pulled up the custom rules and shading palette and just unchecked both the custom ruling and shading boxes, it allowed me to create the print file correctly--the disappearing part numbers were on the new PDF. I didn't have to update the whole book which I didn't want to do because I feared it would mess up the rules and shading. Just unchecking the box before creating the PDF solved that issue for my purposes.

Similar Messages

  • When I create an ul in dreamweaver there are no bullets.

    When I create an <ul> in Dreamweaver CC 2014, there are no bullets. The list is indented, but no bullets. Why? I have even uses CSS but to no availe

    Try removing display:block from line 20 in your bootstrap.min.css
        box-sizing: border-box;    display: block;

  • Why do i get 2 curves and not just 1 when i create a diagram from a row of data in a table ?

    Why do I get 2 curves and not just i when I create a diagram from a row af data in a table ?

    Erik,
    Thank you for giving me the points.  Generally you wait to award points until your problem is solved.  It is totally your at your descretion.
    OK.
    This is still not clear.  To post a screenshot get the "stuff" you want to show in view on your screen, then type the key combination <Command>+<Shift>+3.  The cursor will change to a crosshair.  Click and hold on the top-left corner, then drag to enclose what you want to show (to the bottom-right corner), then release.  The screenshot will appear on your desktop and will be named something like "".
    Now click the camera icon in the tool bar for this forum:
    , click the text box to allow you to navigate to, and select your screenshot.
    Here is what you sent me:
    The graph does not seem to be associated with the table of data you are showing.  Generally when you highlight a graph the corresponding table will highlight and show the source of each of the series in the graph (dark and light blue).
    This is what I would expect to see when highlighting a graph:
    Right now I think there is ANOTHER table arround that is the source for the graph and the table you show is "just another table".  You can move your data into the table the graph refers to by copy and paste, or simply typing the values.  You can change how many series there are by grabbing the little circle at the bottom right of the highlighted cells (when you have the graph highlighted) and dragging as shown:
    The Numbers Users' Guide is a great resource you should utilize and can be found here:
    http://support.apple.com/manuals#macosandsoftware
    The chapter on graphing (or charting) is 7 and starts on page 134.

  • I bought student mac air through university account, Iworks were included when I purchased mac air. But there are no iworks and It's not free when I tried to download from App Store

    I bought student mac air through university account, Iworks were included when I purchased mac air. But there are no iworks and It's not free when I tried to download from App Store. OS was OS X Mountain Lion 10.9 When I received it. Is it because of OS? I upgraded to OS X Mavericks right after I got it.

    Today, I went to the mac store and asked the staff about above issue. Apple obviously sent me a mac air which was manufactured before October 2013 and therefore, iworks and OX Mavericks weren't installed. I have refund for around £45 to purchase iworks. However, I wasn't happy with what Apple actually did. I asked for replacement and refund the one I got and getting the new one from store so I can use mac straight away. however, the refund takes 5-7 working days. The staff on the phone told me if I have enough money I can just buy the new one in the store and get refund later. So I gave up! I was so disappointed with Apple. Even though I use the mac now, this was not the one Apple promised when I purchased online. if anyone would like to buy a mac, Please go to the actual store. DO NOT buy a mac through MAC ONLINE STORE!!! I strongly recommend! I feel like I wasted my time because the company doesn't keep its promise.

  • Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH

    Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH. I'm not new at this. I re-installed FCP successfully. I trashed the preferences. Please help.

    Do you have any filters applied to your clips?
    This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
    I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
    Anywho, export again, this time with "self contained" movie selected.
    Then try to import to Compressor.

  • Cannot create a calendar collection because there are too many already present in

    My OS X Server (Yosemite) error log is throwing this error:
    2014-10-22 00:03:07+0800 [-] [caldav-2]  [-] [twistedcaldav.storebridge.CalendarCollectionResource#error] Cannot create a calendar collection because there are too many already present in <twistedcaldav.directory.calendar.DirectoryCalendarHomeResource object at 0x10743a750>
    ...when I attempt to add more than 50 lists in the Reminders app. I had a similar issue in Mavericks. Is this "50" number available to modify in a config file somewhere?
    My plan is to manage GTD-type projects in my Reminders apps (on iOS and OS X), but this limit is keeping me from creating a list for EVERY project I have.

    Woohoo! I set the integer to "500" and I now have over 200 lists added, and syncing, to my Reminders app and related tools.
    Here's exactly what I did after reading the response from Linc Davis:
    Stop the Calendar service
    Create /Library/Server/Calendar and Contacts/Config/caldav-user.plist
    Edit contents of "caldav-user.plist", setting your desired integer value:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
         <dict>
           <key>MaxCollectionsPerHome</key>    
           <integer>500</integer>
         </dict>
    </plist>
       4. Start the Calendar service
    Enjoy your many more lists.
    Note that a file created in a place other than ~/ may have permissioning issues. To get around this, I made a copy of /Library/Server/Calendar and Contacts/caldavd-system.plist, then renamed and edited that file with nano in terminal.

  • After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

    After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • HT4929 I have os x 10.6.8. When I try to update it says there are no updates for my sytstem.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    I have os x 10.6.8. When I try to update it says there are no updates for my system.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    Welcome to the Apple Community.
    You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not.

  • When I insert a photo from iPhoto in an iMovie video, it´s another photo that is displayed in the movie

    When I insert a photo from iPhoto in an iMovie video, it´s another photo that is displayed in the movie.
    I´ve tried to end iMovie, shut down the MacBook Pro, but the same problem happens again.

    Hi
    BUT
    This can take times ! - I mean several Hours ! !
    Last time I did this it took > 20 Hours (INTEL i7 4x4 processors - 2.2GHz)
    AND - remember to connect Your MacBook (or laptop) to Mains-adaptor - as battery might run out !
    Still - there is no alternative route to this (repair of iPhoto Library) suggested by Karsten !
    Yours Bengt W

  • How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures!

    How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures!

    Did you import an old iPhoto library into this one? It sounds like you did - NEVER import an iPhoto library - it does not work and creates a massie mess
    If that is wha tyou did and you still have the old library available drag the bad library to the desktop for now and drag the old library to your ictures folder (No Importing Involved) and launch iPhoto - it will open the library and upgrade as needed - once you are sure your photos are safe and at least one backup cycle has run you can trash the bad library on the desktop
    LN

  • How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures!, How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures! ( macbook )

    How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures! ( macbook )

    Did you import an old iPhoto library into this one? It sounds like you did - NEVER import an iPhoto library - it does not work and creates a massie mess
    If that is wha tyou did and you still have the old library available drag the bad library to the desktop for now and drag the old library to your ictures folder (No Importing Involved) and launch iPhoto - it will open the library and upgrade as needed - once you are sure your photos are safe and at least one backup cycle has run you can trash the bad library on the desktop
    LN

  • When I open iPhoto it tells me there are recovered photos

    When I open iPhoto it tells me there are recovered photos & do I want to save them.When I click no it saves them anyway as Recovered Photos in Albums.When I open these files they are blank.This is very annoying as I have to go to Albums & delete these files.

    The "recovered" album contains links to "lost&found" photo files in your iPhoto Library. Sometimes iPhoto will find orphaned photos in the iPhoto Library, that are not referenced by any photo in your events.  As a precaution they will be collected in the "recovered" album. Before you try to delete them, I would wait a bit. You may discover, that some photo has lost the connection to the original image file, and then you can retrieve it from the "recovered" album. But sometimes the recovered items are just leftovers, when there was trouble to empty the trash for example, or when iPhoto was "force-quit" and could not complete a file operation.
    Since your "recovered" photos are blank and empty, they are useless as a replacement for missing photos, but there are very useful as an inventory of photos that may have been lost and need to be checked, if they are o.k. Occasionally I discovered that indeed a photo was missing, by carefully looking at the recovered items. Then I knew, what I had to restore from my TimeMachine backup.
    Regards
    Léonie

  • With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?

    With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
    With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.

    Exactly the same question I was about to post!
    Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!! 
    Come on Apple!!
    Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please???

  • HT5188 Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid!  HOW can a code I am getting directly from apple be invalid!!!!!!!!  Seems like your system has A LOT of flaws.

    Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid!  HOW can a code I am getting directly from apple be invalid!!!!!!!!  Seems like your system has A LOT of flaws.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • When i create a new photo album photos are not in the good sequence

    when i create a new photo album photos are not in the good sequence

    Add the photos from your disc to iPhoto, then drag them from the iPhoto Event or photos to the Album.
    You can delete photos from the Album without removing them from the computer.  If you delete them in the Photos or Events area, they are removed from iPhoto, therefore taking them out of the Album.
    The photos have to be in iPhoto to exist in an Album.  They cannot exist in an Album and not be in iPhoto..
    Hope that helps...

Maybe you are looking for