When I create the library and ping it,webtool display the erro.

Error: library stk-l180 is in use by obrobotd on host grandrole, process 6900
Library:Sepaton Vtl Library.Virtual:stk l180.driver:lto2
Following it's properties:
Warning: no hardware info is available for library stk-l180 - resource in use
Device Properties
Warning no hardware info is available for library stk-l180 - resource in use
stk-l180
Device type library
Model [none]
Serial number [none]
In service yes
Debug mode no
Barcode reader yes
Barcodes required no
Auto clean no
Clean interval (not set)
Clean using emptiest no
Unload required yes
UUID 656a5e48-5aba-1029-99d0-00115bcd72c8
Attachment 1
Host grandrole
Raw device /dev/obl0
Connection type [unknown]
[root@grandrole scsi]# more scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: STK Model: L180 Rev: R138
Type: Medium Changer ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 00 Lun: 01
Vendor: IBM Model: ULTRIUM-TD2 Rev: R138
Type: Sequential-Access ANSI SCSI revision: 03
Please describe each tape library by answering the following questions.
Oracle Secure Backup logical unit number [0]:
Host SCSI adapter number 0-15 [0]:
SCSI bus address [0]:
SCSI target ID [3]: 0
SCSI lun 0-7 [0]:
Please describe each tape drive by answering the following questions.
Oracle Secure Backup logical unit number [0]:
Host SCSI adapter number 0-15 [0]:
SCSI bus address [0]:
SCSI target ID [4]: 0
SCSI lun 0-7 [0]: 1

Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613

Similar Messages

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked. What am I doing wrong?

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

When I create a playlist and sync it to my iPhone not all of the playlist transfers over. All of the songs are there and are playable they just do not show up on the playlist.

When I create a playlist and sync it to my iPhone not all of the songs on the playlist transfer over. All of the songs are there and are playable they just do not show up on the playlist. For example, in itunes on my computer a playlist has over 100 songs, but when I sync my phone, my iphone only shows 60 songs. I can go into my phone and add the missing songs to the playlist, but the next time I sync my phone the songs are gone again.

Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page. I cannot seem to find any controls to adjust this. Any advice appreciated.

Thanks CtDave, for the further info. Unfortunately, those suggestions are not working, which is strange.
....Until last week, I used to make multi-page PDFs straight from Photoshop: File > Automate > Make PDF. One simply choses the files, orders them, and creates a PDF. (Resolution doesn't matter; 300 DPI is no problem.) However, my new Photoshop CS5 does not have the option in Automate.
What I've done, seeing as Acrobat is letting me down, is use Bridge (new to me) to create the PDF. It worked without a problem, but seems like more work than the old PS method. I will download a newer version of Acrobat to see if that makes any difference.
.....Also, thanks Test Screen Name: I agree with you that jpeg is irrelevant, and that one can make a PDF from Photoshop (Print > Save As - pdf). But that only works for SINGLE PAGE pdf, not multiple pages as far as I can tell.
Kind regards,
Prince Nuada

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up. There was no error message all along when I created the book.

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" appeard. There was no error message all along when I created the book. I tried several time but failed.

preview the order and try again - http://support.apple.com/kb/HT1040
If it still does not work boot into Safe Mode, preview again and try
With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
LN

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover.Please help I just deleted all doubles did allmy artwork Etc..

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

What do I do when I create a pdf and it says fatal error, there is a problem with the background task

What do I do when I create a pdf and it says fatal error, there is a problem with the background task

see Adobe Community: File Crashing on Output - printing/PDF/other

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

Hi When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

Hi When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

downpayment percentage , so if i want 50 percent of order value to be paid and when i go to faz type the invoice is created for 0 value that 50 percent of the amount is not getting calculated , where as when i enter in order same as 50 percent in amount it gets calculated in invoice, any help ?

Lines needs to create when u create the header

Hi Friend,
this is my requirement,
1) i have header and lines related page, both header and lines will have save when you click the save button.
2) here i need to perform one validation that on save button, lines need to create when u create the header.header must have lines.
3)under save button i have written commit operatition, both line and header table having one common column called -> hid
can you please provide me some psudococe on this

Hey,
You can implement the above requirement in both ways:
1.Using EO
2. Using PLSQL Packages.
Using EO's
Create the below : MasterVO, ChildVO, MasterChildVL
Create an advanced table with details region in it. You can refer DevGuide for more info. if you want.
Make use of advancedTable : addRow functionality. When you commit it.. data will be saved in both tables.
Regards
Sridhar

HT5312 I have an Apple ID already but I never made a rescue email when I created my ID and I forgot my security questions, how do I figure that out?

I have an Apple ID already but I never made a rescue email when I created my ID and I forgot my security questions, how do I figure that out?

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

HT2534 when i create the apple ID with the above procedure, i dont see "none" options under credit card selection, please help.

When i create the apple ID with the above procedure, i dont see "none" options under credit card selection, please help.

Apple needs people like you.

Error when I create the New material Master (MM01) for New Plant.

Dear experts,
I got the error when I create the New material Master (MM01) for New Plant.
Error: Valuation Area 2800 Not yet productive with Material Ledger.
So Pl send me the solution asap.
Venkata Raju Khottari

Hi,
Have u assinged Plant to Company code?
If u say no, use T.code OX18.
Regards,
Murali
Assign points if it is useful.

When I create an album and then try to watch it in slideshow, I get only a black screen with a white title. No photos come up. Also when I click on an individual photo in the album, I get a white exclamation point on a black background but no big photo.

When I create an album of photos and then open the album and try to watch it by selecting "slideshow" I get only a black screen. The white title comes up briefly but then no photos, only a black screen. Also when I go back to the album and click on a thumbnail, up comes a big white exclamation point on a black background instead of the enlarged photo. Any idea what's going on?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Error when after creating My Documents and shared repositories

Hi all,
after setting up a fresh SAP Mobile Documents installation on NW 7.4 and creating the My Documents and shared repositories we see the message "repository not available" when logging in to the MCM User web interface. The NWA log shows the following errors:
Connection failed: Cannot access http://localhost:50000/cmis/json: Connection refused: connect
org.apache.chemistry.opencmis.commons.exceptions.CmisConnectionException: Cannot access http://localhost:50000/cmis/json: Connection refused: connect
Creating sharing home folder for user svcmcm failed: org.apache.chemistry.opencmis.commons.exceptions.CmisRuntimeException: org.apache.chemistry.opencmis.commons.exceptions.CmisConnectionException: Cannot access http://localhost:50000/cmis/json: Connection refused: connect
Testing the connection to http://localhost:50000/cmis/json in the destination sometimes yields a negative initial result, followed by consistently positive results.
Do you have any ideas or suggestions?
Regards
Daniel

Hi Alex,
thanks a lot; we are now able to connect and access Windows network shares after assigning the Content Admin Role to the MCM Users Group. We now however have the issue that our AD users can access all of the share's folders that the service user (assigned to the file system repository) has rights to. How can we enforce the individual user rights from the AD?
Regards
Daniel
P.S.: We are trying to use assertion tickets in this approach.
P.P.S.: We followed the preparatory steps under Integrating Documents from a Windows System into KM - Knowledge Management - SAP Library
Message was edited by: Daniel Hügelmann

When I create the library and ping it,webtool display the erro.

Similar Messages

Maybe you are looking for