When I crop a picture Pixel Demensions become 6 bytes Width and Height 1 pixel each
I can no longer see the picture. How can I fix this?
On the crop tool's option bar, top left, there is a little arrow. Click on that, and reset the tool.
On the most recent version of the program, the reset button is said to be somewhere at the bottom. We don't know which version is on your machine.
Similar Messages
-
oops put the while question in the wrong place!!! but I'm at a loss on how to do this every picture I took everyone looks stretched when I use the crop tool any help would be much appreciated,
I have PS6
thank yousuzukidi wrote:
I have been trying so hard to try and get my head round this since your last comment so what I think I know is with my Nikon d80 having 3:2 aspect ratio pictures that I wanted printed can only be the sizes you mentioned above which is fine as the pictures I got printed were 9x6" but it's from now I'm still bit lost when I use the crop tool and pre set the size to 9x6" with a resolution of 240 and crop out all the bits I don't want it comes back from printers stretched so i'm still lost as I don't know the point where I'm doing something that causes the stretching? thank you for your patience
Lets separate this into topics Aspect Ratio, resolution and size ... etc
Aspect Ratio is just the ratio of an image's two sides. Your camera captures an image with a 3:2 Aspect Ratio. If you want to print the whole image your camera captures it can be printed and image size that has sides the have a 3:2 ratio without distorting the image.
Images are re-sized two ways:
One way is to keep the pixels your camera captures and print them at different resolutions. Resolution is nothing more then pixel size. Pixels have no size till there is a resolution set. Pixels themselves may have a aspect ratio themselves. These days most devices use square pixel. Some video standards use non square pixels. So if you have square pixels and an image with 1800px by 1200px and set the resolution to 300DPI the print size will be 6" by 4" if you set the to 200DPI the print size will be 9" by 6". Its simple math. 300DPI means pixels are 1/300"x1/300" there are 90,000px/inch 200DPI 1/200"x1/200" 40,000px/inch 100DPI 1/100"x1/100" 10,000. Note how quickly the pixel count climes as resolution increase doubling an image resolution requires four times as many pixels not two timas as many.
The other way is to create a new image using the pixels you camera captures. Your Camera pixels are resampled(interpolated) into a totally new image not a single camera captured pixel remains intact the new image has a different numbers of pixels it a different image. There are different interpolation methods some work better then others depending on image content and the direction of the re-size. Any time you resample an image you loose some image quality. The pixels are generated they are not captured using optics and a sensor.
Normally I do not resample when printing I just set the DPI so the image prints the size I want. In the Image size Dialog I un-check resample and the set the print width or height I want to print. Photoshop will calculate the DPI and set the other side size. If you crop without setting a DPI resolution in the crop tool the crop tool will not resample the crop to a particular DPI it should just set the appropriate DPI.
I resample image for the web Cameras capture more pixels then can be display by displays. So in the image size dialog I check resample and constrain the width and height to the image current aspect ratio then I set the number of pixels I want the width or height to be. Photoshop will calculate the number of pixels the other side will be. The DPI is meaningless for web images for Web images are displayed on screens at the resolution a displays has. Your images will display large on a large Low DPI resolution HDTV screen and small on a high resolution cell phone display.
If you want to print you image a size that does not have a 3:2 aspect ratio without distortion you need to crop you image to the aspect ratio you want to print at. You need to discard part of your image. The Crop Tool does not distort it discards part of you image. It may or may not resample the crop selected. I do not use the crop tool but if I did I would not use it to resample the crop I would not set in a DPI resolution in the crop tool.
Photoshop can also resize an image from one aspect ratio to and other aspect ratio a non constrained resize. The resulting image will be distorted. However Photoshop does have have a content aware re-size that tries to maintain recognizable objects perspective during the distortion process. This process can also be aided by user masking.
Cropping:
A 3:2 aspect ratio image can in theory be cropped to an infinite number of smaller images that have any aspect ratios including an infinite number of images that have a 3:2 aspect ratio. All crops can be resampled to a particular DPI resolution. However digital pixels can not be sliced up so there are a finite numbers of crops you can hack form a digital image -
i cant download new application on my Iphone everytime i open app store then searching for the application i want to download when i Tap the FREE sign it become half square and never downloaded.
Sometimes this happens because the app won't run on the iOS version of the device you are trying to install it to. Go to the app store and make sure it will run on iOS 3.1.3 (many only run on iOS 4 or higher).
-
timeline issues - when i drag media back, the timeline becomes very large and out of whack! What is this in CS4?
You are in the wrong forum!
Premiere Pro CS4 & Earlier -
Can I adjust pixel width and height in iPhoto?
I'm trying to find out if it's possible to adjust pixel width and height of a photo without cropping it. iPhoto Help was no help at all.
Thanks.
iBook Mac OS X (10.4.4)For uploading to a site this is the way to do it.
If you wanted to use in another application, you can drag and drop if it is supported, and then use that other application to resize. You can also set up a graphic application as an external editor.
I find it just as quick and easy to export to the desktop, then delete the photos on the desktop when I am done. -
Hi,
We are indexing file share with images and get the properties of Image Width, Image Height, Image Size (we show it as refiners in SharePoint after make it managed properties). Somehow when the picture is png format - we see only Size but not height and width.
Is that any setting that should be done in the file share (when i select an image in the windows explorer window i can see all its properties, and it seems that png files do expose the width and height properties
keren tsurHi Keren,
According to your description, my understanding is that when you tried to crawl file share with images, the ows_ImageWidth and ows_ImageHeight crawled property for PNG file could not be generated.
For your issue, I can reproduce your issue in my SharePoint 2013 environment. For a workaround, you can upload the PNG images into SharePoint images Library and they would work fine.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Revision: 3580
Author: [email protected]
Date: 2008-10-10 16:24:50 -0700 (Fri, 10 Oct 2008)
Log Message:
MXMLG-243 - Path does not draw in the correct location when width and height are set
Fixed MatrixUtil.transformBounds to offset the four bound points by the origin
Bug: MXMLG-243
QA: Yes
Doc: No
Review: Evtim
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-243
http://bugs.adobe.com/jira/browse/MXMLG-243
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/utils/MatrixUtil.asHi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later. -
Resize and crop images to a specific width and height
Hi,
I want to convert images to thumbnails with a 'standard' format - I need all images to have the same width and height.
So I need to resize and then crop the images. Is this possibe with JAI? Are there other libraries which can do this better?
I've read about ImageMagick - are the Java interfaces to ImageMagick good?
/best regards, Håkan Jacobsson - System developer in SwedenDuplicate posting, answers are here
http://forums.sun.com/thread.jspa?threadID=5419291
Pleas don't duplicate unless you note that you have done so and provide pointers to the duplicates - as I'm sure you're aware. . . -
Revision: 12007
Revision: 12007
Author: [email protected]
Date: 2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
Log Message:
When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially. This was preventing our preloader from completing, since we were waiting for a non-0 Stage size. Took a slightly different approach to solving the bug for which the original logic was added to work around.
QE notes: None
Doc notes: None
Bugs: SDK-24191
Reviewer: Alex, Evtim
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/non-0
http://bugs.adobe.com/jira/browse/SDK-24191
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.asRevision: 12007
Revision: 12007
Author: [email protected]
Date: 2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
Log Message:
When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially. This was preventing our preloader from completing, since we were waiting for a non-0 Stage size. Took a slightly different approach to solving the bug for which the original logic was added to work around.
QE notes: None
Doc notes: None
Bugs: SDK-24191
Reviewer: Alex, Evtim
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/non-0
http://bugs.adobe.com/jira/browse/SDK-24191
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as -
Revision: 10085
Author: [email protected]
Date: 2009-09-09 07:39:54 -0700 (Wed, 09 Sep 2009)
Log Message:
Fixing video width and height getting reset when there's no true dimensional change reported by 'onMetaData'.
Modified Paths:
osmf/trunk/framework/MediaFramework/org/openvideoplayer/video/VideoElement.ashi their i have tried your last code but their is a problem with it on my pc that when i click the send video button it gives the error related to vector,
Vector deviceList = CaptureDeviceManager.getDeviceList()
di = (CaptureDeviceInfo)deviceList.firstElement();
returns zero.
please help my email address is [email protected]
kindly send me an email regarding the solution of my problem. i am using 'creative web cam' over XP windows. -
TS3367 When I FaceTime the picture is always on the side and not the correct way up
When I use FaceTime the picture is always on the side and not the correct way up.
I have restored as a new device first and then from backup, neither of which solved the problem. I have used mms regularly since I got the phone about 18 months ago. I will check but as I have been able to receive them to my phones lockscreen I would assume that it is enabled. When I open a conversation with someone it shows the image as
? IMG 6992 Just with differing number but when I click on it nothing opens.
I can send mms fine to other people. I have also tried turning off Imessage and that doesn't solve the issue either.
Thank you for your help -
Single pixel loss in width and height in LR Export?
I am re-sizing on export- sometimes to jpeg, sometimes to tiff. I set the width at 1920 pixels and let the height default. Exports consistently come out at 1919x1279, 1919x1281, and sometimes 1919x1280. What's the issue?
Could the originals have been cropped; so they have slightly different aspect ratios?
-
I am trying to make a holiday card. The Front has pictures running up and down the left and right side. In the middle is the rough 3.5 x 5.5 opening that I would like to place the 3 person picture in. Problem is, only two of the three kids in it fit. How do I crop / make it shrink to fit correctly in this opening? I have tried cropping but it still does not size correctly. under crop in edit, what should I do?? Thanks!
Well, I wouldn't go that far.. the G5 Quad is still a very capable machine.. A machine is obsolete only if it fails to do what you want it to do, and those at TenFourFox would argue your point.. as far as an ipod or ipod touch? Why bother when I can charge it in the wall rather via from the computer's USB port. Ok I decided that I can turn my mac pro into a 24 hour/seven day a week hosting server for all my computers.. It won't use more than 1 core, but at least it will allow me to host 1000's of files and backups of all my original software on all my machines.
To Apple, the Quad maybe obsolete, but to me it is far from it as it runs just as it did when it was brand new. It is semi brand new anyway.
Thank you all for your advice. -
Since the inception of Apple's new iOS , I've being unable to crop pictures intended for Wallpaper without it expanding at the removal of my fingers. Simply put, I can't crop pictures the way I used to do. Help please. This is applicable to all Apple products in my household.
Yes, we know, it's been discussed hundreds of times on this forum. Take a look over to the right at the box entitled "More Like THis."
-
When I open my images in Aperature the white arears are deep red and the blacks are blue
You have "Highlight Hot and Cold Areas" on. Turn it off via "View➞Highlight Hot and Cold Areas". Note the keyboard shortcut -- this is usually how it gets turned on by mistake.
Maybe you are looking for
-
Z61p no longer boots to WinXP when on Advanced Dock
Any advice on how to troubleshoot this would be appreciated. When NOT connected to the dock, the system boots fine. When connected to the dock, the system will not boot past the Thinkpad screen comes up and the system hangs I can't think of any spec
-
I downloaded the source files for the Flash Web Photo Gallery-1 from the Adobe site, and exported the fla file without any changes to flash 6.0 which should be the same as the one that comes with photoshop. When I loaded the page into the browser, th
-
Error message:- java.rmi.RemoteException: Unexpected fault was returned by
Hi All, When we trying to fetch documents from plum tree portal using a java api, we are getting below error message. please can anyone guide us, error message:- java.rmi.RemoteException: Unexpected fault was returned by the server (faultcode: Server
-
BB10 Updates - What's the latest version now released?
It's been 1 month since I used my Q10 With so many bugs & problems, my OS is still 10.1.0.2309 I keep checking for updates almost everynight. Is there any new updates than the one I currently have?
-
Upload an excelfile to a table using BAPI method
Hi, I would like to upload an excel file having three coulumns of data to a table using BAPI methods. Anybody with a solution? Thanks in advance.