When I crop picture (no constraint), choose print, can print picture 4 x 8
When I crop picture (no constraint), choose print, paper and print size, can print picture 4 x 8 for instance, if choose smaller will cut off part of picture. How do I tell iPhoto that I want the whole picture in smaller size? If I crop with specific size, the same thing happens. Help - what I am missing?
Two choices - crop the photo to the print size (4x8 in your example) and print it selecting that print size on the first print window
Or Print and on the first print window after making the selections click customize and right click on the preview and select fit to frame - this will print the entire photos with white space fill on the sides needed to fit
Other than that your question is not clear - if this does not explain then please ask the complete question again with details and complete sentences
LN
Similar Messages
-
Which martix printer can print out the chinese charaters in SAP .?
Dear all ,
I want to buy so me NETWORK martix printer which can print out the chinese charaters in SAP ( NOT IN FrondEND ) mode .....
Can you recommand some model to me ???
Many thanks ..
Carlos ZhangHi Kishan,
Thank you for your very quick reply but I found another solution.
I made one add-on device type, copying from 'JPSAPWIN', one add-on spool format, copying from 'DINA3' A3-format spool formant SAP provides, and modified them so as to output correctly both in size and in fonts. -
Tried all the printer uninstalled and re enstalled,, i can print test page but nothing from Pages , Or any text from desk top, can print from iphoto's.
Can print via Network to a Brother HL-3045cn from Pages and all Text, the Hp Prniter was working till i upgraded to 10.9.3?Reset your printing system, as per > OS X Mavericks: Reset the printing system
-
My Hp Printer can print from my Imac But my printer can not see the Imac to scan Photosmart 5514
My HP printer is a(photosmart5514) Imac can print to it, but the all-in one can not see my Imac to scan
This has been a problem with HP for ages. HP's support forum is filled with this complaint, and no resolution appears evident.
You can try assigning both the iMac and the HP Photosmart 5514 static IP addresses. This will ensure they will remain in the same "place" on your network. This may help.
I recommend you abandon the attempt to initiate scanning from the scanner. Initiate the scan from your computer with HP's Image Zone software. -
When i crop a video using FCE, how can i export just the selection?
When using the cropping tool with FCE 4, say i just crop out a single square from near the top of the video. if i were to export this video now, the new video would consist of the cropped out selection surrounded by black. is there anyway i can export the cropped out selection without the black? i'm not looking to rescale the image, just to remove the selection at it's original size without all the black around it.
FCE's a fixed-resolution editor and there's no way to export at the resolution of your cropped image unless it matches one of the sequence presets. In FCP you could set a custom resolution and export as that.
-
Canon all-in-one printer can't print? Please, help
Hello.
I recently bought a Canon Pixma MG3550 all-in-one printer. I didn't get a USB cable in the package so i decided to connect it wirelessly. I tried everything but it just couldn't connect. So, I went to the store and bought a USB cable for printer. I connected my printer with this USB cable and installed drivers from the CD that came with printer. Everything went fine but when it came to the part where I can print test page I clicked 'Execute' and nothing happened. I gave up that and clicked next. When I tried to print a picture it says: 'Windows photo viewer encountered a problem printing your picture. Trying reinstalling your printer, and then try again.' When I tried printing a PDF document nothing happened.
So, my computer (Windows 7, 32 bit) recognizes this printer in Devices and Printers and it's set to deafult printer, but when i click 'Printing Preferences' it says 'Operation could not be completed' and when I click printer properites, it says: 'The Canon MG3500 series printer driver is not installed on this computer. Some printer properites will not be accessible unless you install the printer driver. Do you want to install the driver now?'. If I click Yes, the Add printer driver wizard shows up, but when i go through it and finish it it's still the same. Also, if I click 'Print test page', it says: 'Test page failed to print. Would you like to view the print troubleshooter for assistance? Access is denied.'
Then, if I go to troubleshooter it says that everything is fine. When I go to Canon Quick Menu and click 'Start my printer' it says 'the supported printer cannot be detected' but when I go to 'Diagnose and Repair Printer' it says that everything is okay.
I don't know what to do. I tried reinstalling driver thousands of times, I downloaded drivers from this site and everything, but it's all the same. Also, every time I turn on my printer on button I hear some weird noises two times about 5-10 seconds altogether. I don't know if this is related somehow, but I don't think that my device is broken because it can connect to pc and scanning works perfectly, but printing and copying doesn't.
Please help me, I'm desperate. I'm trying so hard but everything is the same and I'm so tired of this.
Thank you.If you have any questions, feel free to ask. I hope this helps.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it. -
Starting this am I cannot print anything form the internet when using Firefox as my browser. I can print Word documents and when using Safari as my browser...just not with Firefox. I have contacted Epson and it is not a printer problem. I have contacted my IP and it is not them
See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages -
Can view picture, but can't hear sound on imovie '09 imports
Hi, gang.
When I import video into imovie '09, I can see picture but cannot hear the sound.
The imported footage, however, is fine: both picture and sound are present on my hard drive after the import.
When I use imovie HD (which i still keep around) I can picture and hear sound as I import.
This more annoying than anything else, as, I still have the downloaded footage I need. Still, this is still abnormal behavior for this version, is it not?
Thanks much.
Regards,
HVThis is working as designed. iMovie 09 will import a lot of formats that iMovie 06 would not. iMovie 6 would only import in "real time". iMovie 09 also imports formats like high definition AVCHD, MPEG2, and h.264 that can import faster than real time or slower than real time, depending on the speed of your processor. Audio on import for these new formats makes no sense. So it appears Apple decided not to do audio on any.
-
Color Printer which can print on 250gsm to 300gsm papers
Color Printer can print on 250gsm to 300gsm papers
I need a color Printer which can
1)print on A3 papers with GSM 250gsm to 300gsm
2)Should support cerificate paper printing
3)Maximum number of prints.
4)No white borders should appear on printed papers.
Any suggestions please as soon as possible ?Hi,
As you may find statd below, scanning is no longer supported for the Laserjet 3030 on Mac OS X v10.8, the same apply for OS X 10.7 and 10.6 as well..
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=115&prodSeriesId=378056&prodTypeId=18972&prodSeriesId=378056&objectID=c034116 13#A2 -
oops put the while question in the wrong place!!! but I'm at a loss on how to do this every picture I took everyone looks stretched when I use the crop tool any help would be much appreciated,
I have PS6
thank yousuzukidi wrote:
I have been trying so hard to try and get my head round this since your last comment so what I think I know is with my Nikon d80 having 3:2 aspect ratio pictures that I wanted printed can only be the sizes you mentioned above which is fine as the pictures I got printed were 9x6" but it's from now I'm still bit lost when I use the crop tool and pre set the size to 9x6" with a resolution of 240 and crop out all the bits I don't want it comes back from printers stretched so i'm still lost as I don't know the point where I'm doing something that causes the stretching? thank you for your patience
Lets separate this into topics Aspect Ratio, resolution and size ... etc
Aspect Ratio is just the ratio of an image's two sides. Your camera captures an image with a 3:2 Aspect Ratio. If you want to print the whole image your camera captures it can be printed and image size that has sides the have a 3:2 ratio without distorting the image.
Images are re-sized two ways:
One way is to keep the pixels your camera captures and print them at different resolutions. Resolution is nothing more then pixel size. Pixels have no size till there is a resolution set. Pixels themselves may have a aspect ratio themselves. These days most devices use square pixel. Some video standards use non square pixels. So if you have square pixels and an image with 1800px by 1200px and set the resolution to 300DPI the print size will be 6" by 4" if you set the to 200DPI the print size will be 9" by 6". Its simple math. 300DPI means pixels are 1/300"x1/300" there are 90,000px/inch 200DPI 1/200"x1/200" 40,000px/inch 100DPI 1/100"x1/100" 10,000. Note how quickly the pixel count climes as resolution increase doubling an image resolution requires four times as many pixels not two timas as many.
The other way is to create a new image using the pixels you camera captures. Your Camera pixels are resampled(interpolated) into a totally new image not a single camera captured pixel remains intact the new image has a different numbers of pixels it a different image. There are different interpolation methods some work better then others depending on image content and the direction of the re-size. Any time you resample an image you loose some image quality. The pixels are generated they are not captured using optics and a sensor.
Normally I do not resample when printing I just set the DPI so the image prints the size I want. In the Image size Dialog I un-check resample and the set the print width or height I want to print. Photoshop will calculate the DPI and set the other side size. If you crop without setting a DPI resolution in the crop tool the crop tool will not resample the crop to a particular DPI it should just set the appropriate DPI.
I resample image for the web Cameras capture more pixels then can be display by displays. So in the image size dialog I check resample and constrain the width and height to the image current aspect ratio then I set the number of pixels I want the width or height to be. Photoshop will calculate the number of pixels the other side will be. The DPI is meaningless for web images for Web images are displayed on screens at the resolution a displays has. Your images will display large on a large Low DPI resolution HDTV screen and small on a high resolution cell phone display.
If you want to print you image a size that does not have a 3:2 aspect ratio without distortion you need to crop you image to the aspect ratio you want to print at. You need to discard part of your image. The Crop Tool does not distort it discards part of you image. It may or may not resample the crop selected. I do not use the crop tool but if I did I would not use it to resample the crop I would not set in a DPI resolution in the crop tool.
Photoshop can also resize an image from one aspect ratio to and other aspect ratio a non constrained resize. The resulting image will be distorted. However Photoshop does have have a content aware re-size that tries to maintain recognizable objects perspective during the distortion process. This process can also be aided by user masking.
Cropping:
A 3:2 aspect ratio image can in theory be cropped to an infinite number of smaller images that have any aspect ratios including an infinite number of images that have a 3:2 aspect ratio. All crops can be resampled to a particular DPI resolution. However digital pixels can not be sliced up so there are a finite numbers of crops you can hack form a digital image -
Cropping my pictures - Want to know how big I can print them afterwards
I have always been a Kodak EasyShare user in the past. I decided that this year after my vacation, I would start using iPhoto for all of my photos. I am having a bit of a problem right now and I am hoping that somebody can help me. In EasyShare, when I cropped a picture, it would still tell me how big I could enlarge that picture to afterwards with no loss in quality. I would simply choose "4X6 photo" and as I cropped it in closer and closer, my options as far as enlarging would be reduced. Is there anyway that I can do this in iPhoto? I want to crop a lot of my pictures, but I don't want to take away any image quality later on if I choose to enlarge them. Any help would be greatly appreciated.
Thanks,
MattiPhoto does not have that feature - you have to look at the size of the photo (in the info window in the lower left of yoru iPhoto window) and the size you want to print
as a guideline if you want to print at 180 dpi (the point where Apple warns you that you may not like the quality) then you need the following minimum sizes (180 x the dimensions in inches)
3x5 -- 540 x 900
4X6 -- 720 x 1080
5x7 -- 900 x 1260
8x10 -- 1440 x 1800
8.5x11 -- 1530 x 1980
For 300 dpi prints the numbers are much larger - for example
8.5x11 -- 2550 x 3300
The math is very simple - dpi you want to print times the dimensions of the print
LN -
I want to play music from my playlist when I am using slideshow of my pictures in Ipad, but I can only choose ONE SINGLE song, and it continuously repeates itself. Is there a way to play the complete playlist while showing my pictures?
You can start the playlist playing in the iPod app and then switch into the Photos app and start your (non-music) slideshow - as you've found out you can currently only select a single track in the Photos app. Whether that will change in iOS 5 I don't know, but you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html
-
When I listen to music on Apple TV 2 my pictures from iPhoto come in aafter about ten minutes, but always the same album (which I never asked for), always in random order and always in a different format. How can I choose a different album myself and control the order and format?
Thank you Winston for a helpful response and for reminding me of something which I found nearly a year ago and then lost (in my mind) because I did not use it. I am grateful for a correct answer but it still only achieves part of what I wanted.
I can now choose my photos, decide how long they stay on screen and choose one of a variety of presentations. Two things I still can't do.
One is to get it to play the photos in the chronological order in which I have carefully set them in an album; it still tends to be random and repetitive. The other is that I cannot get any of them them to saty on screen for more than about 20 seconds. I guess this is all due to the way Apple TV is constructed.
But still thanks, nevertheless.
Alec -
I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??
Try updating the printer driver.
-
When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?
What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?
Maybe you are looking for
-
Adobe Edge (.oam file) interaction problem with Muse
I created a edge animate file which has a parallax scrolling feature in it. When I scroll, the items move. But when I load the animation's .oam fle from muse, the animation losts its scrolling effect. How can I solve this? (PS:I used Edge Commons to
-
Open library from AFP share - Unsupported File System - Aperture 3
Testing Aperture 3 - Exported a project as a library to an AFP (10.5) share. I then tried to reopen the library and got an error Unsupported File System ? Is there possibly a network file system that will support Aperture 3 libraries ?
-
Trying to encrypt RTP audio stream
I'm trying to encrypt audio (after compression) on the transmitter side and decrypt it on the receiving side. I tried making a wrapper around the PushBufferDataSource at both ends (provided by the processor and the RTPManager), which also wraps PushB
-
Document Upload with Forms in Database
Hallo, I'm using Forms Developer 10 and I need a solution for Upload Dokuments (like PDF) with Forms into the Database. Can somebody send a code-sample to me. Thanks Frank
-
Does anyone know where I can get information on how clone() behaves with nested classes? thanks ...