When I define my R/3 system in XI SLD,I got CIM_ERR_ALREADY_EXISTS message

CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCSystem.CreationClassName="SAP_BCSystem",Name="BRP.SystemNumber.0020270914.SystemHome.sapprddb"
Before I defined R/3 system in XI SLD wrongly, after that I delete from Business and technical , after that I start new definition.And It gave me error above.
I think some data must be deleted related with the previous definition.
How can I correct this error?
Thanks

There was a BRP system in Class: BC System. I removed it.
And I tryed to add BRP system (technical landscape). It gave me error belowe:
500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
java.lang.IllegalArgumentException: The node, node element, and attribute info MUST NOT be null

Similar Messages

HT1420 When I go to move a song from my library I got the message "this computer is not authorized"... if I go to the store pop down and authorize the compter is says "this computer is already authorized".... what's going on?

When I go to move a song from my library I got the message "this computer is not authorized"... if I go to the store pop down and authorize the compter is says "this computer is already authorized".... what's going on?

If a small number of your iTunes purchases are affected, delete and redownload them if doing so is free in your country. If you get that message for every item, click here and follow the instructions.
(69023)

Error when i try to create a panorama pic. in Ps. i got this message : Error 8: Syntax error. Line: 132 - args.putEnumerated( keyMode٬ typeBlendMode, enumDarken );

when i try to create a panorama pic. in Ps. i got this message : Error 8: Syntax error. Line: 132 -> args.putEnumerated( keyMode٬ typeBlendMode, enumDarken );
everything with last updated the OS , Java , and PS version .
any help pls

What software are you using? PS version. OS version etc. Also check you have all the updates for your version of Photoshop installed. That your only selecting image files to be stitched. That a javsscript error message from one of the Stack Script Only that get used when you use Photoshop Photomerge Script.

Creating a Business system in the SLD

I am receiving an error message when trying to create a business system in the SLD. The error is "The selected client has an associated logical system nae that is already used for another business system. Select a different client."
Here is my issue. The business system that I am creating is for our R/3 4.6C production system. I currently have a business system for our R/3 4.6C quality system. Our prodution and quality R/3 systems do have the same logical system name and client number. This is because we recreate our qaulity R/3 system from our production system.
So, the question is, How do I create a business system in the SLD for my production R/3 system when the logical system name is used assoicated with and business system.
I should add that all my R/3 systems have been created as technical systems without any problems.
Thanks,
Jim

It is recommended to have all ALE names unique.
If it is not possible the following workaround can be used.
Create one system in SLD (business system/technical system) which contains the ALE name. Proposal: The production system
Create the other systems(dev/QA) without the ALE name
During configuration the production system will be configured as usual.
For Dev/QA systems: Define in the receiver agreement the header mapping and use The Receiver service to reference the production system. Because you reference the production system the ALE name of the production system will be used to fill the idoc.

When I tried to update, I got this message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator" What do I do???

I am running version 3.6.22 and would like to update. However when I tried to update from the Mozilla web site I got the message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator"
What do I do now?? Paul Stager [email protected]

I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?

How define ECC 6.0 system in smsy? Solution Manager 7.0 SP15

Hi Colleagues,
I have to define ECC 6.0 in my Solution Manager 7.0 SP15.
At smsy transaction -> Landscape Components -> Systems I don't find name SAP ECC to create new system. So I created it on SAP ERP.
My problem is when I go to create a logical component to assign my ECC system. So I go to transaction smst-> System Groups and Logical Components -> Logical components -> SAP ECC -> SAP ECC Server, I've created a Z New logical componets and at the right frame I am not able to assign my define system under SAP ERP. I get a pop-up "No system found for this product/main instance".
Please could you help me?
Thanks and Regards
Raul

Hi,
The problem is solved.
When I defined the system in smsy transaction, I made a mistake because I define it like a ERP 2005 and not a ECC 6.0, so in the next step when I want include this new system in a ECC 6.0 logical group, it wasn't able to find any ECC 6.0 system defined.
Thanks, René for your reply.
Regards

InfoSource 8ODS_SLS is not defined in the source system

Hi Guys,
    When I tried to load data from ODS to Infocube, I am getting the following error.
InfoSource 8ODS_SLS is not defined in the source system
      Source System is not R/3. It is just a flat file and data was uploaded into ODS. When transferring the data from ODS to Infocube, I get this problem. And I have defined the update rules for infocube and also given the infosource name as ODS.
      But the data is not getting uploaded in the Infocube.

First replicate your BWSELF system.
Then, Run this program in SE38:
rs_transtru_activate_all
Enter the source system (your BW system)
Enter the datasource (8ODS_SLS).
If you get an error message immediately, the datasource doesn't exist. If it runs, check and make sure you get no error messages.
/smw

Infosource 8ZISCMS10 is not defined in the source system

Hi Gurus,
I got an issue when loading the data with in SAP BW (Info source is ODS),It threw an error message stating "Infosource 8ZISCMS10 is not defined in the source system",
Could any one of you help me in this regrad plz,
N:B: I have activated the transfer structure through RS_TRANSTRU_ACTIVATE_ALL and replicated the data sources before loading...

When u activate DSO/ODS (say ZISCMS10) it creates datasource (8ZISCMS10) & Infosource (8ZISCMS10)
U can check these at ...... Modeling --> Datasources -> BI -> BI source system name. If it is missing .. reactivate DSO/ODS.
If the load is failing in QA, u should rereactivate DSO/ODS in DEV and transport that to QA.. After transport.. make sure datasource (8ZISCMS10) & Infosource (8ZISCMS10) appears in QA (Modeling --> Datasources -> BI -> BI source system name)

Error: Infoobject is not defined in the source system

hi
(I posted this in other forums as well - but wondering, it it should be here in BCT/Extractors - I could use more help).
this is my issue:
I am trying to load master data (attr) for an infoobject.
But, it fails with the following error message (when I click on the "Error message" button on the "monitor" screen.
"Infoobject is not defined in the source system"
"Erros in source system".
(I did rsa3 and find it has some data + i checked on the base table as well, it has data; the datasource is from an SRM system) Why is it complaining like this.
any help on what could be wrong here? Pl let me know,
thanks

Thanks Ricardo,
I have tried that b4. and it says the "source system connection is OK".
any other idea?
Do I have to install the infoobjects on the source system as well? SRM is my source system.. I am not sure on that, but If I have to, how do I do that?
thanks
Message was edited by: Esan

DataSource 0HR_ATT is not defined in the source system

Hi Gurus,
When I am trying load data for HR Master data Attribute it is not loading any anything. I checked that datasource in Rsa3 at R/3 side there it is showing
"DataSource 0HR_xx_attr is not defined in the source system", can anybody give me the solution.
I will assign full points.
Thanks in advance.

Hi Sergio,
I have replicated the datasource in BW. Still It is showing the same.
Kindly advice.
Maruthi

In ME22N change when I click on Print button system should generated messag

Hi Gurus,
Once I take the PO print next time when I go to ME22N when I click on print button system should generate the message with out clicking the repeat output.
next time when I want take the print with out clicking the repeat output in ME22N when I click on print button system automatically generate the output message.
For that what are the settings need to be setup.
Thanks in advance
sapmm

Hi ,
If you dont want message to be generated during PO change.Change the following setting.
For eg. u have message type ZNEU.
SPRO-MM-Purchasing-Mesages-Output control-message type -click Define Message Types for Purchase Order
click on :Fine-Tuned Control: Purchase Order
Delete the entry for operation 2 , for ZNEU.
Thank you.
Regards
Amar

DataSource 2LIS_11_VAHDR is not defined in the source system

I have a problem when I had activated the Data Source called 2LIS_11_VAHDR in ERP DEV and then put it in a request to be transfered to ERP Prod
Then I am using RSA3 I receive the following error
DataSource 2LIS_11_VAHDR is not defined in the source system
I tried to activate this data source several times in ERP Dev and send it to production without any success

I am sure you would have done these steps, but just a double-check.
1. RSA5 - Install the data source
2. RSA6 - Activate the data source
Check in LBWE if the data source is available.
All this will be captured in a transport request(s) - you may may have a Workbench request & a Customizing request.
Also, before transporting, please check in your target system whether the datasource is available or not (RSA5).
Further to the above, do a check in Dev for the following.
After activating it in RSA6, fill the setup tables for 2LIS_11_VAHDR - i.e. thru' transaction OLI7BW.
And check the data in RSA3.

Extraction Problem - DataSource is not defined in the source system

Hi,
I am loading transaction data into sales cubes, while loading in process chain it shows "No Data"
so when i go in rsa3 extration for checking availibilty of data.
The following message shows,
DataSource 2LIS_12_VCHDR is not defined in the source system.
In LBWE first it was shown Inactive then i make it active.
So, what is the procedure to defined this data source to the source system.
Thanks & Reagards,
SD.

Hi All,
Thanks for ur reply.
But i can not found the datasource in RSA5, can anyone explain how to find the datasource in RSA5?
Datasource name : 2LIS_12_VCHDR , Cube Name : 0SD_C03
and how to activate in RSA5 ? & after activation how can migrate the same datasource in r3 side by replication?
Also the procedure to fill up the setup tables and then do the loading from r3side by thorugh infopackage...
Thanks & Regards,
SD

I defined my PI/XI system in R/3 system SM59

I defined my PI/XI system in R/3 system SM59 inside below
Rfc Destinations
HTTP Connections to R/3 System
 PI/XI definition
Test connection fails to XI system. I checked username,password, ip address
all is correct.I'm using PIAPPLUSER . This user was defined at the both end (R/3 and XI).
What can I do for achieving R/3 - XI connection.Vice versa is properly running.

PIAPPLUSER
role:SAP_XI_APPL_SERV_USER
profile:SAP_ALL
T_YB250030
When I use PIAPPLUSER connection is fail.
If I use most autorized user connection is successfull.
In addition which role or profile must be added to PIAPPLUSER
thanks

DataSource 0HR_PA_PA_1 is not defined in the source system

Hi All,
DataSource 0HR_PA_PA_1 is not defined in the source system Error is coming when I am trying to activate the datasource in source system (In RSA5-Data source is not available in source system)in order to pull data to HeadCount InfoCube in SAP Hr module.
Can anybody please help me in this regards.
I searched in sdn but no luck.
Thanks
Mohan

HI Mohan,
0HR_PA_PA_1 is a datamart datasource , It will be available in the BI system and not in the HR system
The extractor takes the data from the master data tables in the BW system. (check SAP note 336229 )
Check the SAP help
http://help.sap.com/saphelp_nw70/helpdata/en/29/02b43947f80c74e10000000a114084/frameset.htm
Regards,
Sathya

When I define my R/3 system in XI SLD,I got CIM_ERR_ALREADY_EXISTS message

Similar Messages

Maybe you are looking for