When i double click on "glassfish-installer-v2.1-b33-windows.jar"
when i double click on "glassfish-installer-v2.1-b33-windows.jar" to install that into my system i get this error: couldnot find main class.Program will exit.
Thanking you.
Hello Diana.
Unfortunately, this kind of problems are the hardest to fix because they're the hardest to diagnose. For now, try reading this support article:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start
I hope it helps.
Similar Messages
-
I just downloaded the itunes 801 setup. When I double click on it, nothing
I just downloaded itunesSetup 8.02.20. When I double click on it, nothing happens. Running Windows XP on Dell Latitude D800. The hourglass starts then a few seconds later nothing.
This computer once had itunes but it has been removed. The itunes folder exists in Program Files but only contains itunes,resources.Found a fix.
Based on reading other posts, I tried to remove other apple products, and for each got a message regarding "Windows Installer" was not working etc.
So downloaded updated version of Windows Installer from MS:
http://www.microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9 -54D056D6F9F4&displaylang=en
Installed is a Itunes loaded fine -
When I double click run installation, then proceed to restart, I restart the computer, but when it loads back up, I get an error message, saying I need to restart, whats wrong?
I get an error message, saying I need to restart, whats wrong?
That is a "kernel panic".
Try here. Resolving Kernel Panics -
Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?
Some saved Mac links that may help
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0 -
Optional Install.mpkg can't open when I double-click to attempt SL install
The Optional Install.mpkg "can't open" when I double-click to attempt SL installation.
then something is wrong with your system and not the DVd as may have been suspected. you can always install the optional packages by booting directly from the DVd as i said but you should figure out why it does not work normally. make a new user account and log into it. can you do it from there?
-
When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?
Anyone can help to advice how to solve this issue ?
-
How do I import an iweb domain file from an ibook (OS 10.4) to an imac (OS 10.73)?
I copied the domain file from my ibook to my imac, but when I double-click on the file, it doesn't open in iweb.In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. Then place the domain file in your Users/Home/Library/Application Support/iWeb folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN -
I have a MacBook Air and when I double click on gmail in my dock I can't open
When I double click on gmail in my dock on my MacBook Air it doesn't open.
Close all windows and quit all applications.
Hold the option key down and click the "Go" menu in the Finder menubar.
Select "Library" from the dropdown, then "Preferences" folder.
Look for these two files.
com.apple.desktop.plist
com.apple.systempreferences.plist
Right click each one of those and select " Move To Trash" from the contextual menu.
Restart the computer. -
Get value of field object when I double click on any column of report
Hi,
We are converting our projects from .NET 2003 to .Net 2008 and upgrading reports10 to crystal reports 2008 and changing our Active x report viewer control to crystal report viewer.
We donu2019t use reports just to see and print the data. Our use is a bit more.
As we were using Active X Control (CRAXDDRT) to perform different operations
Following are some functions which are included in our requirements:
1- We need the columns width to be flexible which we can changed in the code dynamically according to the users wish
2- Setting text of some fields dynamically from .Net code
3- Hide and show the columns dynamically from .Net code
Upto here we are done using crystal report 2008 and .net 2008
Now we are stuck with problem
4- When we double click on fieldobject at runtime we are able to fetch the value of field object by using e.objectinfo.text.tostring, so far it is perfect
But we have different situation here and need a solution for this
I have two fields like Account ID and Account Description
I need the solution so that when user clicks either on Account ID or Account Description I should be able to fetch the Field object value of Account ID Column only so that i will be able to open different forms and reports based on that ID
As we were doing it before using Active X Control the code snippet is giving below
case "Field: Account. AccountID ", "Field: Account.Description"
GlobalCode = GiveCode(mYFields.Item(1).value) '------ Where 1 refer to Account ID, so in both cases either we click Account ID or Description Field at run time we are able to return the account ID field value.
so we need solution some thing like that please do let us know how we can do that
For Your reference we were using CrystalActivexReportViewerLib10.CRVFields obejct to fectch the report values
Thanx in Advance
Regards,
Arshad Hussain BhattHello,
I am getting value of that cell where I am clicking. But I need the value of other columns also in that particular row where I double clicked. For this I gave one example also that suppose I have a report where there are two columns. One is AccountID and other is AccountDescription. Now if I click on Account ID I get the value of AccountID and when I click on AccountDescription I get the value of AccountDescripiton This is oK n good but I want that If i double click on AccountDescription I should be able to get the value of AccountID also.Please tell me is there anyway to do so?
We did so when we were using CRAXDRT.Report Bellow is the code snippet for how I did it in that.
Dim MyField As CrystalActiveXReportViewerLIb10.CRVFields
Private Function GiveFieldIndex(ByVal As CrystalActiveXReportViewerLib10.CRVFields, ByVal FldName As String) As Integer
For i as integer = 1 To FldArry.Count
If FldArry.Item(i).name = FldName Then
GiveFieldIndex = i
End If
End Function
Private Sub CRViewer1_DoubleClick(ByVal eventSender As System.Object, ByVal eventArgs As AxCrystalActiveXReportViewerLib10._ICRViewerEvents_DblClickedEvent) Handles CRViewer1.DblClicked
If MyField.Name = "Field: AdoJV.AccountID" Or MyField.Name = "Field: AdoJV.AccountDesc" Then
/Following line will give us AccountID in anycase either we click on AccountID or Account Desc or even you can add more column by adding Or Operator. We need something like this in Crystal Report 2008/
Dim GlobeAddEditCode as String = myFields.Item(GiveFieldIndex(myFields, "Field: AdoJV.AccountID")).Value
End If
End Sub
Regards,
Arshad Hussain Bhatt
Edited by: arshhb on Oct 31, 2009 6:44 AM
Edited by: arshhb on Oct 31, 2009 7:09 AM
Edited by: arshhb on Oct 31, 2009 7:13 AM -
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
I imported all my pics to Iphoto and I can't open/edit them now. When I double click on them, I only get an exclamation mark. Please help me I don't have copies. I tried burning them to a cd but it didn't work. Can someone please help me?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
When i double click on a folder to open it doesn't open
but when i right click then i push open then it works but lion np
Hey mikey1923,
I would try adjusting the speed of double clicking to see if that helps:
To open the preferences, choose Apple menu > System Preferences, then click Accessibility.
Choose the Mouse & Trackpad option.
Double-click speed: Adjust the mouse or trackpad’s reaction time when you double-click an item.
via: OS X Mavericks: Mouse & Trackpad pane of Accessibility preferences
http://support.apple.com/kb/PH14427
Welcome to Apple Support Communities!
Take care,
Delgadoh -
In ios 7.0.2, when you double click the home button it brings up the icons but won't allow you to show them with minus signs, is it no longer necessary to do this?
jim96776 wrote:
is it no longer necessary to do this?
It was never necessary except in certain unusual circumstances. -
Before I upgraded to 8.0 I could double click and see all open Apps and then close them. Now when I double click I am not sure what I am seeing or what to do?
The format keeps changing but the basics remain...in the center of the screen are large images of the recent apps which you can close by swiping up and away.
Maybe you are looking for
-
I cannot connect my MacBook Air to a projector - It will not detect a 2nd monitor or display. I am using an Apple made Mini Display port to VGA adapter. As I read online I see that many other peple are having the same problem. Is this an Apple defect
-
Hi, when i go to create a a/r invoice + payment for one time customers, I get an error message which says default business partners for invoivce and payment not defined message 439-39. I know we have to do initial settings. I created a default custom
-
Why did Solaris 10 X86 change the output of the format command?
Solaris 8,9, & 10 for Sparc all display disk manufacturer information on the format command output: 0. c1t0d0 <SUN36G cyl 24620 ... > 1. c1t1d0 <SEAGATE-ST3360704FSUN36G-0826 cyl 24620 ... > But for X86 this information is not displayed: 0. c1t0d0 <D
-
Zero amount in document currency
Hi, I'm looking for if I could fill a zero amount in WRBTR field, in document currency. My customer would like to fill a zero amount in GBP currency in company with a local currency in EUR. So he would like to entry a zero amount in document currency
-
hii all, plz help me. in my system few problems are coming, 1) job work challan is not getting generate., means job work register is not fetting updated. 2) i am doing to post the excise document , after capturing the excise doc., means PO- Jiex-MIGO