When i duplicate an object, it moves it far away from where my original object is as soon as i move it. is there any way to fix this?

when i duplicate an object in numbers, it moves it far away from where my original object is as soon as i move it. is there any way to fix this? thanks

Hi Rick,
Your initial duplicate should be offset by one grid unit to the right and below the location of the original. If you move that duplicate by dragging it, without first de-selecting it, then reselecting it, the place you put it will determine the offset for subsequent duplicates (from the same original or from the copy).
Example:
Initial object and first duplicate:
Pressing shift-up arrow would move the duplicate up to align with the top of the original. Pressing shift-left arrow would then place the duplicate directly in front of the original.
Without being deselected, the duplicate was dragged to the position shown:
Command-D was then pressed to duplicate the first copy:
The duplicate appeared in this position
Regards,
Barry

Similar Messages

I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09.

I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09 with all the availbable updates.

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

I have a question when I try to authorize my daughters ipod to itunes on a new computer it pulls up a email addresse I do not know and will not transfer her music is there any way to fix this Thanks in advance

When trying to authorize my daughtes ipod classic to a new laptop it pops up and asks for apple id but the email is not one of ours and it will not let me change it is there any way to fix this problem Thanks in advance

To whom does the email address belong to? Are you sure it wasn't an email address used in the past or perhaps one that had belonged to a friend of hers?
Either way, if the music on her iPod was purchased under an account not belonging to her or you, there is much you can do. Sorry.
B-rock

I just bought a iphone 3gs from my friend. when he gave it to me it was in recovery mode. Now everytime i try to Restore it i get the error 1603. is there any way to fix this ? please help !

I just bought a iphone 3gs from my friend. when he gave it to me it was in recovery mode. Now everytime i try to Restore it i get the error 1603. is there any way to fix this ? please help !

iOS: Unable to update or restore
Are you sure your friend didn't jailbreak it?
If so, save yourself a lot of time and trouble - throw it in the trash.

When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACB

Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACBOOK GETS TOO HOT WHEN I CLOSE THE SCREEN BECAUSE OF THIS ISSUE!!!! FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!! This only happens when it is plugged in!!!!! Any way to fix this? Help.. :-( Please!!!!!!!! The light stays solid when plugged in on sleep mode!!! This *****. Help..

I figured it out! I don't fully understand why, but when I uninstall ESPOINAGE 2 from my laptop, sleep works fine now.. Weird!

I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

Hello Abdo_Zain,
I would be concerned too if I was not able to gain access to my iPad. If you are unsure what your Apple ID is, you can find the steps in this article:
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
You can reset a forgotten Apple ID password by going to the following link:
Apple - iForgot
https://iforgot.apple.com
Also, you may be able to skip the step of entering your Apple ID if you are setting up the iPad for the first time.
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have the kin 2 and whenever I turn it on, it does the introduction (pictures, ect.) and the pictures go on for about 3 minuets. but then when it is done, the screan turns blank. is there any way to fix this problem?

I have the kin 2 and whenever I turn it on, it does the introduction (pictures, ect.) and the pictures go on for about 3 minuets. but then when it is done, the screan turns blank. is there any way to fix this problem?

I have the EXACT same problem. I just got done talking with Verizon, and a replacement is on the way.

I was trying to clean up my desktop, and inadvertently switched all my icons on my desktop. When I click on file a, file b opens and so on, regardless of the extension type. Is there any way to fix this?

I was trying to clean up my desktop, and inadvertently switched all my icons on my desktop. When I click on file a, file b opens and so on, regardless of the extension type. Is there any way to fix this?

I use
Chronosync (http://www.econtechnologies.com/pages/cs/chrono_overview.html)
and
Dropbox (https://www.dropbox.com/)
Both work very well. The former I use for manual, one-way synchroniziation of (nearly) entire systems. The latter for automatic syncing of very active directories through local and shared online storage.

HT201210 i tried installing ios 6 on my new ipad but when i try to change it to ios 6 it say that it cant be restored because the firmware file is not compatible. Is there any way to fix this problem

i tried installing ios 6 on my new ipad but when i try to change it to ios 6 it says that the firmware file is not compatile. Is there any way to fix this problem?

Sorry to be the bearer of bad news.
Only developers have legal access to iOS 6 right now, if you really, really wanted it you could sign on as a developer for $99.
http://developer.apple.com

When my Gen 6 nano fades to black the unit shuts off completely and the music stops. is there any way to fix this?

When my Gen 6 nano fades to black the unit shuts off completely and the music stops. Is there any way to fix this?

Make sure the headphones are plugged ALL the way in, meaning the white part of the headset is flush with the body of the Nano and no silver from the headphone's plug can still be seen.
You posted this in the iPod Touch forum, when you should have posted this in the iPod Nano forum.
B-rock

I'm new at this but I am hoping someone can help me.I have recently been away for 5 weeks and my Tom Tom required updating.When I clicked to update it required a pc.As I didn't have access to a pc it wouldn't work is there any way to do this without a pc?

Hi, I'm new at this but I am hoping someone can help me.I have recently been away for 5 weeks and my Tom Tom required updating.When I clicked to update it, it required a pc. As I didn't have access to a pc it wouldn't work is there any way to do this without a pc? I was without this app for 3 weeks! Thanks, Lea

The process to update your Tom Tom is a big data file, you will need to be connected to a Wi-Fi network for it to download. If will take about an hour.

When I try to play a movie from Netflix, it keeps asking me to change to 32-bit. Is there any way to make this the default?

I use an iMac. Just a year old.

There is a way:
[https://support.mozilla.com/no/questions/792633 https://support.mozilla.com/no/questions/792633]

When i try to download Firefox it gives me the phone UI not the tablet UI is there any way to fix this?

When I launch Firefox it uses the phone UI not the tablet UI

There is a bug in Firefox 9 that causes it to use the non-tablet UI on tablets running Android 4.0 (Ice Cream Sandwich). This is fixed in Firefox 10: https://bugzilla.mozilla.org/show_bug.cgi?id=708772
You can download a Firefox 10 pre-release version from the [https://market.android.com/details?id=org.mozilla.firefox_beta beta channel] today. The final version will be published to the release channel next week.

Some photos pulled from iPhoto turn green when placing them in a project. Is there any way to fix this?

I am using a Macbook Pro with 2GHz Intel Core i7 processor; 8 GB 1333 MHz DDR3 memory and OS 10.9.4. I have iPhoto 9.5.1 and iMovie 10.0.4. I have a project with video, and have added some still photos from my iPhoto Library. All of the photos appear fine until I add them to a project. Then some of them turn to a solid green. If I create a mp4 from this project, the offending photos remain green.
I have checked the offenders in iPhoto to see if there is a common denominator. There is no common camera and no common editing. I did make a previous attempt to place some of the photos into an iMovie project and some of them were dropped into the wrong place--like into a title. But didn't notice any glitches at that time, only afterwards and I'm not sure if any of the problem photos were a part of that incident.
I have absolutely no problem with iPhoto. Is there a library file that can be deleted to force iMovie to rebuild its connection to iPhoto.

Only to load your backup from before downloading the MM photos
LN

When i duplicate an object, it moves it far away from where my original object is as soon as i move it. is there any way to fix this?

Similar Messages

Maybe you are looking for