When I email a photo it goes to my Outbox and stays there never getting sent.

When I select a photo and click Email Photo i fill in the email address and subjet and click send.
The email goes to my Outbox and just stays there and does not get sent.
Do I have some settin set wrong or what.

Yes I can send other emails without attachments. If I send another email with Pic it will also go the the outbox and stay there until I delete them.
I rebooted like you said and the email was sent with the attachment and I recieved it on at my other email address.
I then went back to my Photos and selected another Pic and emailed it out and it seams to work again.
Do we need to reboot the Ipad ocassionally?
Thanks for your help.

Similar Messages

  • TS3899 When I try to send an email on iPad, it goes to outbox and stays there? I get a message that I have exceeded my output limit. I don't think this is accurate because I don't send that many messages. Maybe 30 a day. Please advise. Thanks

    Question? When I try to send out email on my ad address, it goes to the outbox and stays there. The message is something like, you have exceeded your limit on messages so your message will be stored in the outbox. I don't send more than 30 emails a day, and i use two other email addresses. What can I do?

    Change the password on that e-mail account. It's possible that your account has been hacked/spoofed and spammers have used it to blast out junk, leaving you to 'pay the price'. If it's one where you can contact the company, contact them and ask them what's going on. (if this is g-mail, yahoo, hotmail, don't bother, there's no way to contact any sort of support)

  • When I take a photo it goes to camera roll and my photo stream. This doubles the memory being used. Can I delete the camera roll?

    When I take a photo it goes to camera roll and my photo stream. This doubles the memory being used. Can I delete the camera roll? This seems pointless to have the same pictures twice. My Photo Stream pictures upload to my PC, so why should I have the same photos in Camera Roll?
    Am I supposed to delete pictures in camera roll after they go into My Photo Stream? Why can't I just take a picture and it go to photo stream on its own? My camera roll AND My Photo Stream go back to March 11, 2014

    You're misinformed and have asked several questions that I'll try to tackle.
    No it doesn't double the memory. The Photo Stream image is simply a pointer to what you have in your camera roll.
    If you delete pictures from your camera roll, leaving them only in Photo Stream, you will lose those images forever if you don't then pull them out of Photo Stream on another connected device. Photo Stream is meant to be TEMPORARY cloud storage for your images. Read about it here: iCloud: My Photo Stream FAQ
    You should ALWAYS offload your images if you want to keep them. See how to do that here: iOS: Import personal photos and videos from iOS devices to your computer

  • I am about to go get my 4th iphone 4s since November!  Up in the left coener where it shows your signal strength, it goes into searching mode and stays there.  Kills my battery.  This one has lasted the longest-I got it December 23.  Any ideas out there?

    I am about to go get my 4th iphone 4s since November!  Up in the left corner where it shows your signal strength, it goes into searching mode and stays there.  Kills my battery.  While in searching, no calls can be made/recieved, no internet, etc. This one has lasted the longest-I got it December 23.  Any ideas out there?

    Both.  The first two, I did use my itunes.  The guy at the apple store said that could be the problem.  The last time they gave me a new phone and SIM card, and the tech said it wouldnt be the itunes.  Just to be safe, I never connected this phone to the itunes until last night-after it started searching- to save everything since I'm sure they will be replacing the phone today.  But hey, thanks for the suggestions.  I'm about at my wits end with Apple!!  Especially since i added a third line to my account just so I could get an iphone back.

  • Safari goes to 100% CPU and stays there on certain websites

    I got a new computer a month or two ago (a Powerbook 1.67), and used apple's migration assistant to transfer all my stuff over from that comp to this one. Ever since I've started using the comp, when I use safari to load certain pages or parts of pages, such as www.mapquest.com (when I try to type in the directions from/to box, or try to load recent searches) or www.orbitz.com (any time I'm on the results screen once I've searched for a flight or some such), the CPU load goes to 100%, and stays there until I close the tab with that site in it (even with safari in the background), and anything else I try to do until the tab is closed runs like molasses. This definitely did not ever happen with my old Powerbook 867, but I don't recall installing any new safari extensions or plug-ins since I got the new computer, so I'm somewhat mystified as to what is causing it. Do you guys have any thoughts as to what it might be, or suggestions as to how best to go about figuring it out?
    Thanks for any help you can provide.

    Safari has been known to cause cpu usage to spike. If nothing else, report the pages to Apple using "Report Bugs to Apple" under the Safari menu.
    One of the Safari issues in the OS X 10.4.4 update was:
    Addresses an issue in which some websites, such as www.cbsnews.com, could cause CPU usage to spike unnecessarily, or cause Safari to stop responding, unless Safari's Enable JavaScript preference was deselected.
    It is possible that they didn't get it completely fixed.
    I have also noticed that Safari slows down after being open for an extended period or if I have tons of tabs open, although it is not as bad as it once was. Additionally, regardless of anything else, it does appear that some sites slow down Safari's performance and/or spike the cpu usage until I close that tab. (I've had this happen to me with Firefox as well, by the way).

  • When i open i-photo, it goes straight to browsing, and won't stop

    i photo, when i open it goes to browsing (spinning circle) and it won't go any further than this,?

    Okay this is really really important.
    It's a list - think of it this way, it's the answer to a question: "What images are on my computer"
    The thing about deleting things from there is that you don't know the importance of whatever it is you're trashing. So, really, don't do that. No, really.
    Once the photos are in iPhoto you can delete them - but go to the location where you have them stored and delete them from there. That way you won't do any damage...
    Regards
    TD

  • TS3899 I can receive open and read my email but when I try to respond everything goes to my outbox and never gets sent ???? I contacted my provider and changed password but still does. It work ??? Help please ??

    On my iPad-I cannot reply to my emails -I receive and am able to open and read but all responses go to my outbox -changed the password -talked to provider-logged completely off and on -still nothing -does anyone have any advise how to rectify?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • When I send an email with a photo from snow leopard to email of a lion user, the photo shows up in the Lion email sideways. When they email it back it returns to correct position. Is there something in Lion causing this?

    When I send an email via MACMAIL  with a photo from snow leopard to  an email of a lion user using At & T , the photo shows up in the Lion user email sideways. When they email it back it returns to correct position. Is there something in Lion causing this? This also happens when in in using iphoto'11 i share/email a photo to myself and the phot shows up sideways but is in a correct position prior to emailing.

    I recently tried sending myself an email through Thunderbird to another email account to see if that was the case, but the email came in with a font so tiny that it was unreadable. I had chosen a font type and size (arial 10) and just coming into my outlook inbox was virtually unreadable.
    And referring to the person I work with, she doesn't have problems getting anyone else's emails, just ones I send from Thunderbird.

  • Why does photo information not available when you email a photo?

    Why does photo information not available when you email a photo?

    How are you mailing from iPhoto? If you have iPhoto set to mail using Mail.app, you can set what will be included, when you mail with Share > Mail:

  • When i email a photo taken with iPad's camera, it arrives upside down. How do I correct this?

    when I email a photo from camera roll, it arrives updie down.  How do I correct this?

    when I email a photo from camera roll, it arrives updie down.  How do I correct this?

  • [svn:fx-trunk] 12007: When the Internet Explorer browser window is obscured Stage. width and Stage.height never return the proper sizes until/ unless the IE window is unobscured long enough for the player to feel it needs to render initially .

    Revision: 12007
    Revision: 12007
    Author:   [email protected]
    Date:     2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
    Log Message:
    When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially.  This was preventing our preloader from completing, since we were waiting for a non-0 Stage size.  Took a slightly different approach to solving the bug for which the original logic was added to work around.
    QE notes: None
    Doc notes: None
    Bugs: SDK-24191
    Reviewer: Alex, Evtim
    Tests run: Checkin
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/non-0
        http://bugs.adobe.com/jira/browse/SDK-24191
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as

    Revision: 12007
    Revision: 12007
    Author:   [email protected]
    Date:     2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
    Log Message:
    When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially.  This was preventing our preloader from completing, since we were waiting for a non-0 Stage size.  Took a slightly different approach to solving the bug for which the original logic was added to work around.
    QE notes: None
    Doc notes: None
    Bugs: SDK-24191
    Reviewer: Alex, Evtim
    Tests run: Checkin
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/non-0
        http://bugs.adobe.com/jira/browse/SDK-24191
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as

  • Hi, I did the 30-day trial of indesign, now I bought the student package and when installing it they ask me for my serial number and I didn't get any.. please help!!!

    Hi, I did the 30-day trial of indesign, now I bought the student package and when installing it they ask me for my serial number and I didn't get any.. please help!!!

    We have received your payment - thank you! For your information are the details of the order here:
    Ordering information:
    Creative Cloud membership Photo Student and Teacher Edition (one-year)
    74.00 DKK per. month
    Order number[Removed by moderator]
    18.50 DKK charges
    Total payment today:  
    92.50 DKK

  • Everytime I try to restore a backup on my iPhone 5 from iTunes the phone goes in DFU mode and stay stuck

    i backed my phone up on itunes and then I changed the battery on my own. the problem is that I can set the phone as a new one but when I try to restore a backup it goes on DFU mode and stay stuck. What can I do?

    Once you opened the device you voided any post-warranty support from Apple or the forum. You are on your own. You can try a 3rd party repair facility, but you cannot get any help here or from Apple.

  • I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all

    I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?

    If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
    It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful.

  • IPhone 4 won't stay on 3G.  Goes to E and stays there.

    I had an iPhone 3G. Not the 3GS, just the 3G. I really liked that phone and couldn't wait for the "upgrade" to see what it could do. I got the 4 and sold my 3G. So did my wife.
    Well, my wife has no problems with hers, but I'm having issues with connectivity, reception, and lack of 3G coverage. My phone starts on 3G, but within a day or so, it switches over to E... and stays there. The internet and all of my apps seem to move VERY slowly. Pages actually load, and load, and load... finally coming up. If I turn the phone completely off and then back on again, it goes to 3G coverage and I'm moving along at a good speed, although I can't really say it's any faster than my old 3G. But then within a day or so, I'm back on E and back to sluggish.
    I've dropped more calls since getting this phone than I did the entire time I owned my 3G. Made sure I had the latest software (I did), and have been trying to figure it out.
    Any suggestions? Anyone else having this problem? I don't think it sounds like the reception problems others were talking about, as this one does it whether I'm holding it or laying it on a counter, or whether it's in the case or not. It always goes to E and gets sluggish.
    Wishing I had my 3G back...
    All the best,
    Glenn

    Take it to Apple. They will diagnose it, check your settings, etc. -- and replace it if defective. We have four in our family and no such problems, and no problems at all.
    Phil

Maybe you are looking for

  • IPad (3rd generation) does not automatically connect to wi-fi.

    iPad (3rd generation) does not automatically connect to wi-fi.  It is fully updated to 5.1.1 but you have to manually connect after turning off and back on.  I also have an iPad 2 with the same OS but it automatically connects.  The wi-fi has no secu

  • Query to filter out in XMLSEQUENCE

    Hello all, I am new to xml concepts. The below query, Gives me result count of 100 out of which i need to filter out particular record say 999999999 how to i do that? SELECT extractvalue(VALUE(p),'/CUSTOMER_NO') a FROM test_clob w, TABLE(XMLSEQUENCE(

  • How to ctreate report in dev environment

    Hi all, Can I create report on the dev evironment only by having VPN acessto that machine . If yes then when I logged in to the financial reporting stdio client of the Dev environment m/c it gave me the following error. You are not authorized to use

  • Have i lost my photos?

    Hello all, I have burned some photos to a cd from iphotos. All worked well, but The cd I used was a cdrw with some photos already on it, which i burned from a pc. Have I been an idiot? It appears to me that the old pc photos are gone. any opinions or

  • Place Cursor In Screen Fields

    Hi abapers and experts! In my module pool screen there is Date: Department: Username: Password: I want to place the cursor in Date field: after entering it, the cursor must automatically placed into Department. Kindly help out as early as possible. T