When i enter the 2nd data it replaces the 1st one

when i enter the 2nd data it replaces the 1st one,consequently i losed it.if someone know how i can enter multiple data and save each one in a specific row without losing any data
thanks

i was wondering if i will use a lot of clients(for example 2) do i have to use 2 sources not 1 in the Vi.
now i have in source1:dstp://localhost/emetteur1
source2:dstp://localhost/emetteur2
instead of having 1 source used for all clients:dstp://localhost/emetteur.
i'm really confused
and for sending continuously,i have to do it,because each client will not send data just 1 time.i think i missed something in the vi you gave me.what i'm expecting to have is when a client enter"nom- prenom-n candidat" in "emetteur.vi" i"ll see them in a table 1 time in 'recepteur.vi" and when a client enter "nom- prenom-n candidat" in "emetteur1.vi" i'll see them in the 2nd row of the table in "recepteur.vi" and so on.a lof of clients and one receiver without repeating data in reception
Attachments:
Pr du tableau à envoyer.zip ‏30 KB

Similar Messages

What's the easiest way to validate the 2nd date is after the 1st date?

Hi,
I have 2 items, say, date1 and date2.
What is the easiest way to validate that the date2 is after date1? For example, date1 is "07/31/2009", thus date2 must be after "07/31/2009".
Thanks much :)
Helen

Helen:
For the example provided you can create a validation of type 'PL/SQL->pl/sql expression' and provide the expression below
to_date(:p_date2,'mm/dd/yyyy') > to_date(:p_date1,'mm/dd/yyyy');
Varad

When i login on game center it say enter your birth date when i enter it and i perss next the birth day will come again and again what should do

when i login on game center it say enter your birth date when i enter it and i perss next the birth day will come again and again what should do

Start a game with Game Center and go from there.

Every time I create an account with iCloud then try to open it I get wrong ID or password. Even when I enter my birth date I am told it is incorrect. I have done this several times with the same results.

Every time I create an account with iCloud then try to open it I get an error message: wrong ID or password. Also when I enter my birth date I am told it is incorrect. I have done this several times with the same results.

Oldcameraman
Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
I have answered your most recent of the duplicates
Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
am not sure can be used.
Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
ATR

Why is it when I enter a birthday date for a contact as the 12th of November 1993 that the birthday appears as the 11th of November and as the 19th birthday rather than the correct 20th?

Why is it when I enter a birthday date for a contact as the 12th of November 1993 that the birthday appears as the 11th of November and as the 19th birthday rather than the correct 20th?

Yoor post is very confusing. AOL's iPad magazine is called "Editions" and it's free. "The Daily" is put out by TheDailyHolding and is owned by Rupert Murdoch. You've already posted in another thread where the solution was given. Other people seem to have manged to get unsubscribed.
Best of luck.

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver is just fine. Any help out there?

rb
Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
For those with the display card error, the answers include
a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
if necessary consider a driver roll back.
b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
c. delete the BadDrivers.txt file
the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
Re: Premiere Elements 9 Tryout Serious Display Problem
Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
ATR

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

Have the developers considered randomizing the numbers for the passcode? It is easy to watch the pattern when someone enters their passcode. However, if the numbers appeared is a random order each time, it would enhance the security feature even more.

Have the developers considered randomizing the numbers for the passcode? It is easy to watch the pattern when someone enters their passcode. However, if the numbers appeared is a random order each time, it would enhance the security feature even more. Personally, I would prefer this option with security in mind.

He slightly beat you Meg, and I'm in the same boat with you. If I used a passcode I believe I would go with the feature to use a longer alphanumeric passcode rather than a 4 digit number even with the random code entry.
And of course if Apple did put this feature in they need to make it an option or we'll see lots of posts wanting to know how to get rid of it.

Is there any way to know when (and/or whether) a particular tv season will be available for purchase on itunes. i'm particularly interested in the 2nd season of "homeland," the 5th season of "damages" and the 7th season of "dexter." thanks.

is there any way to know when (and/or whether) a particular tv season will be available for purchase on itunes. i'm particularly interested in:
     the 2nd season of "homeland,"
     the 5th season of "damages"
     the 7th season of "dexter."
thanks.

Thanks. But the disc inspector only appears to let me change things like where the title menu button takes you, not detailed user operations. I have pretty much given up on this being anything other than a giant hassle, but if anybody knows whether a script could do this, I would be eternally grateful.

HT1245 When I enter an appointment in ical on the macbook it syncs as a different time on my iPhone?

When I enter an appointment in ical on the macbook it syncs as a different time on my iPhone?

If you want to sync calendar events over the air with your Google calendar and when creating a new event on the iPhone it will be created and synced with your Google calendar automatically, you need to select your Google calendar as your default calendar, not your iCloud account calendar.

My MacBook Air keeps asking me for my yahoo password; which when correctly entered will not allow me into the account. iPad and iPhone both working on the same password/account.

my MacBook Air keeps asking me for my YAHOO password; which when correctly entered will not allow me into the account. iPad and iPhone both working on the same password.

I've got automatic downloads turned off and I tried signing out and in via the settings and still keeps asking me for an apple id.
It doesn't do it continuously, it'll just pop up randomly ... if the phone is just sitting there it may ask for my apple id and regardless of whether I press cancel or enter my password nothing happens .. it may be another 2mins, 5mins, 15mins but eventually it'll just randomly pop up and ask me again. It does accept my password though because I tried entering an incorrect password to see what happens and it gives me the error saying it's incorrect, so when I enter the correct one in the box disappears and it accepts it as I say, but only for so long before it pops up again.

Config sync:error: Folder is no longer part of the system data source or the folder not found

This is the message I am getting when i try to configure synchronization through intellisync in all functions. Any ideas?
Folder is no longer part of the system data source or the folder not found
JT

jtwilcox wrote:
Mail account is MAPI
XP
Outlook 2007
thanks for your help so far!
JT
Hi...
Based upon the folder error, my guess is the Desktop Manager is having difficulty determining your default mail client. I am not sure why but it is easy enough to redo a profile in Outlook just to test this. (Control Panel / Mail)
Of course, I would backup my PST file prior to doing this and then create a new profile and import the PST file into the new profile. Once the profile is running and tested ok, I would again go to the Control Panel / Mail and set the default profile to point to the newly created profile. Then run the Desktop Manager and see what happens....
H.
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister

Schedule a report with the system date imbeded in the file name

Hello,
Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE? When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
Thanks!

%SI_STARTTIME% will add the time the report ran too.
Adding onlt the date will necessarily have to be done via the appropriate SDK.

How to set the Reverse date to be the same as the Actual GI date by default

Hello,
On VL09 (reverse goods movement) screen, default reversal date is the system date.
Users have to select the line, click on define date button and enter the correct cancellation date to the local date field on the pop-up.
I want the reversal date on VL09 screen to be the same as the Actual GI date by default.
Thank you.

Hi,
I checked the program.
Check in routine FORM insert_data_for_reversal ---> IF Condition (( xlikpukwa-wbstk EQ charc AND xlikpukwa-vbtyp CA vbtyp_lief ) OR ( xlikpukwa-wbstk CA 'BC' AND xlikpukwa-vbtyp CA vbtyp_liav ). ---> 2 performs are there one with '01' and other with '02' as actual parameters.
In your case '01' is passing to the routine. if you try to pass '02' u can achive your requirement.
For testing in debug mode pass FIELDS-FIELD_ATTR = '02' for field name DATLO. then you can see the output.
Try to handle this problem using Enhancement Operations.
Hope this helps you.
Thanks
Raghavendra

When i enter the 2nd data it replaces the 1st one

Similar Messages

Maybe you are looking for