When I execute my download for Itunes windows comes back with the error file does not exist verify it
The following error message comes up every time I run the Itunes installer package.
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package."
I've tried several downloads, but they all end with the same error message.
I also resently had my hard drive cleared due to a virus, so possibly missing something?
Vincent
Hi vindog60,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
Issues installing iTunes for Windows - Apple Support
Cheers,
Alex H.
Similar Messages
-
I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
However...
I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
Any help please on this would be appreciated!
PeteSee Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
tt2 -
Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?
Try disabling your firewall; both on your PC and the external Firewall/Router.
-
I installed ADE and when I try to download ebook it tries to open with Adobe reader and does not give option to open with ADE
It sounds as if you downloaded Adobe Acrobat Pro. If you did, uninstall it. Then repair Adobe Reader.
The free Acrobat account has no connection to any of this. -
Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Itunes installation error
Start by clearing your browser's cache and then get a clean download of the iTunes installer. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links. Review the rest of the tip if needed.
tt2 -
I know there are similar other issues with IE 10 and Windows 7. This is WINDOWS 8.1, and the IE Welcome message is totally absent from the default unattend.xml in the c:\windows\panther directory. In fact, I did a sysprep without using any injected
unattend.xml - this is the Microsoft Default!
So I suspect this will start appearing all over again soon. Anyone figure out what was causing it?
Here is the new Specialize section from the xml:
<settings pass="specialize">
<component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>true</SkipAutoActivation>
</component>
<component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>true</SkipAutoActivation>
</component>
<component name="Microsoft-Windows-SQMApi" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<CEIPEnabled>0</CEIPEnabled>
</component>
<component name="Microsoft-Windows-SQMApi" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<CEIPEnabled>0</CEIPEnabled>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<!--<CopyProfile>true</CopyProfile>-->
<ComputerName>Win8</ComputerName>
<TimeZone>Pacific Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<!--<CopyProfile>true</CopyProfile>-->
<ComputerName>Win8</ComputerName>
<TimeZone>Pacific Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<!--<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
<Description>Disable UAC for Users</Description>
<Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "EnableLUA" /t REG_DWORD /d
0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Order>2</Order>
<Description>Disable UAC for Admin</Description>
<Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "FilterAdministratorToken" /t REG_DWORD
/d 0 /f</Path>
</RunSynchronousCommand>-->
<RunSynchronousCommand wcm:action="add">
<Description>Enable Admin Account</Description>
<Order>3</Order>
<Path>net user administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Path>powercfg -h off</Path>
<Order>4</Order>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Order>5</Order>
<Path>cmd /c %WINDIR%\Setup\Specialize_x64.cmd</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<!--<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
<Description>Disable UAC for Users</Description>
<Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "EnableLUA" /t REG_DWORD /d
0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Order>2</Order>
<Description>Disable UAC for Admin</Description>
<Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "FilterAdministratorToken" /t REG_DWORD
/d 0 /f</Path>
</RunSynchronousCommand>-->
<RunSynchronousCommand wcm:action="add">
<Description>Enable Admin Account</Description>
<Order>3</Order>
<Path>net user administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Path>powercfg -h off</Path>
<Order>4</Order>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Order>5</Order>
<Path>cmd /c %WINDIR%\Setup\Specialize_x86.cmd</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<BlockPopups>yes</BlockPopups>
<CompanyName>FYM Inc</CompanyName>
<DisableAccelerators>true</DisableAccelerators>
<DisableDevTools>false</DisableDevTools>
<DisableFirstRunWizard>true</DisableFirstRunWizard>
<DisableOOBAccelerators>true</DisableOOBAccelerators>
<DisableWelcomePage>true</DisableWelcomePage>
<EnableLinksBar>false</EnableLinksBar>
<FavoritesDelete>true</FavoritesDelete>
<FilterLevel>High</FilterLevel>
<Help_Page>www.google.com</Help_Page>
<Home_Page>www.google.com</Home_Page>
<LockToolbars>false</LockToolbars>
<MSCompatibilityMode>false</MSCompatibilityMode>
<NoDial>true</NoDial>
<ShowCommandBar>true</ShowCommandBar>
<ShowInformationBar>true</ShowInformationBar>
<SuggestedSitesEnabled>false</SuggestedSitesEnabled>
<SearchScopes>
<Scope wcm:action="add">
<DisplayQuickPick>true</DisplayQuickPick>
<ScopeDefault>true</ScopeDefault>
<ScopeDisplayName>Google</ScopeDisplayName>
<ScopeKey>Search1</ScopeKey>
<ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
<ShowSearchSuggestions>true</ShowSearchSuggestions>
<ShowTopResult>true</ShowTopResult>
</Scope>
</SearchScopes>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<BlockPopups>yes</BlockPopups>
<CompanyName>FYM Inc</CompanyName>
<DisableAccelerators>true</DisableAccelerators>
<DisableDevTools>false</DisableDevTools>
<DisableFirstRunWizard>true</DisableFirstRunWizard>
<DisableOOBAccelerators>true</DisableOOBAccelerators>
<DisableWelcomePage>true</DisableWelcomePage>
<EnableLinksBar>false</EnableLinksBar>
<FavoritesDelete>true</FavoritesDelete>
<FilterLevel>High</FilterLevel>
<Help_Page>www.google.com</Help_Page>
<Home_Page>www.google.com</Home_Page>
<LockToolbars>false</LockToolbars>
<MSCompatibilityMode>false</MSCompatibilityMode>
<NoDial>true</NoDial>
<ShowCommandBar>true</ShowCommandBar>
<ShowInformationBar>true</ShowInformationBar>
<SuggestedSitesEnabled>false</SuggestedSitesEnabled>
<SearchScopes>
<Scope wcm:action="add">
<DisplayQuickPick>true</DisplayQuickPick>
<ScopeDefault>true</ScopeDefault>
<ScopeDisplayName>Google</ScopeDisplayName>
<ScopeKey>Search1</ScopeKey>
<ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
<ShowSearchSuggestions>true</ShowSearchSuggestions>
<ShowTopResult>true</ShowTopResult>
</Scope>
</SearchScopes>
</component>
<component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<fAllowFullControl>true</fAllowFullControl>
<fAllowToGetHelp>true</fAllowToGetHelp>
</component>
<component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<fAllowFullControl>true</fAllowFullControl>
<fAllowToGetHelp>true</fAllowToGetHelp>
</component>
<component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableWER>1</DisableWER>
</component>
<component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableWER>1</DisableWER>
</component>
<component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<!-- High Performance -->
<PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
<!-- Power saver -->
<!-- <PreferredPlan>a1841308-3541-4fab-bc81-f71556f20b4a</PreferredPlan> -->
<!-- Balenced -->
<!-- <PreferredPlan>381b4222-f694-41f0-9685-ff5bb260df2e</PreferredPlan> -->
</component>
<component name="Microsoft-Windows-powercpl" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
</component>
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Identification>
<JoinWorkgroup>Workgroup</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Identification>
<JoinWorkgroup>Workgroup</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
</component>
<component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
</component>
</settings>
I'm thinking of dumping the entire IE section and see what happens.I too received this error as I tried to run my first Windows 8.1 deployment. Per another post I commented out this line
<IEWelcomeMsg>false</IEWelcomeMsg>
from the IE section of the unattend.xml. I was then able to run my deployment. I do not see this line in your posting though.
I referenced this link even though it was for Windows 7.
http://social.technet.microsoft.com/Forums/en-US/c41a2b69-a591-4cd3-86ab-6a0f8a73b858/getting-windows-could-not-parse-or-process-the-unattend-answer-file-for-pass-specialize-with?forum=mdt
Hope this helps someone.
JayTheTech
To clarify, I edited the unattend.xml file from from Deployment Share, not C:\Windows\Panther.
DS\control\task sequence ID\unattend.xml
JayTheTech -
How do I close an app/session, such that when I restart it, it doesn't come backat where I left off, e.g. Safari, I want to restart with a new screen, not the one I previously closed from
ThanksDepending on how the app is programmed, generally to force close an app, double tap the home button. You'll see the app icons and previews on the screen. Scroll sideways if needed to bring up the app in question. Flick the preview for that app up and off the screen. then single tap the home button or the home page preview to exit the mode
The app should then reboot from closed instead of just reopening -
This is getting so frustrating, I last synced my iphone in september and it worked fine, as i've just imported a new cd I wanted to sync to get it on my phone - anybody help to get a more uptodate software on my iphone, please
iTunes runs on your computer, not your phone. Install the latest version of iTunes on your computer. If you're using a Mac, and running OS X 10.5, you will need to upgrade OS X first.
-
When I try to connect my iPhone to iTunes it comes up with the error code 0xE8000004
I have just finished restoring my iPhone 4 and upon trying to connect to iTunes to set the phone up I receive the following pop up message:
"The iPhone could not be activated because of an unknown error (0xE8000004). Please try again later"
I have tried switching the USB ports and even tried on another computer so I'm not sure what to do next.Hey eventsjordan1,
I believe this article has some information that will help you address this issue:
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett NThere are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR. -
"The key 'LocalizedPerfCounter' does not exist in the appSettings" when creating Socket
Hi all,
Some time ago, I've installed the nuGet package for self-hosted signalR applications on a project. Today, I went to start a completely unrelated project, one that does not have that package (or any package at all), and has absolutely nothing to do with owin,
asp.net, signalR or anything else related to that package.
Now in this project, when I try to create a Socket, I get an InvalidOperationException: "The key 'LocalizedPerfCounter' does not exist in the appSettings".
The exception seems to be handled and the program proceeds, but it's annoying.
Also, I'm seriously concerned. Here I'm not trying to create some arcane ASP.NET thing that calls down into a dozen layers and six different configuration frameworks before actually getting to the TCP stack. I'm doing a plain straight new Socket(AddressFamily.InterNetwork,
SocketType.Stream, ProtocolType.Tcp).
How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to affect something that resides in the basic System.dll? What business does it have interfering with very low-level network calls?Hello Zappo,
For this InvalidOperationException, please check this hotfix to see if you are under those scenario:
http://support.microsoft.com/kb/2784156
>> How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to…
For this, since it is related with the NuGet, I suggest that you could post it to the NuGet forum,
https://nuget.codeplex.com/workitem/list/basic
The current forum is specifical for .NET Framework Class Libraries.
Discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection. Discuss and ask questions
about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
Thanks&Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"file does not exist on remote server" when uploading image
As the title says, when uploading an image im getting the
message "file does not exist on remote server"......yet dreamwever
has uploaded the file, its there. All other pages on my website
work fine when uploading images. Any ideas?What image type is it? Is it in an images folder or the root
directory? It would be helpful to post a link. -
In settings when I turn on automatic downloads for iTunes how come when i buy a song I can't automatically purchase the song
When I turn on my ipod or I plug it in the apple logo appears for a few seconds and then the screen flashes white, soon after the "use itunes to restore" message appears but when I plug it in to my laptop the device isn't recognised on itunes
-
It says I'm logged into my Apple ID on my App Store but when I try to download an app it comes up with my mums Apple ID asking for her password yet I have never used her email or Apple ID to login in? Could this be cause we have back up on same comp?
Bojana321 wrote:
... this has only come up today yet it says I'm logged into mine!
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Maybe you are looking for
-
Apple iTunes Home Sharing, and using an external AP with new GigE Wireless "N" Router
I just upgraded to the Verizon FiOS (Actiontec) GigE Wireless "N" Router (from the old megabit wireless A/B/G router) last week. So far, almost everything has been working okay. Before I get to the issue, let me make another statement... My house i
-
HP pavilion g7-2293nr Notebook PC black screen
hello here is my issue, i got this laptop christmas of 2012 so my warranty has run out but have had no major problems, sadly 2 days ago i had turned my laptop off and it was working fine no crashes no blue screen or sudden shut downs but it turned of
-
How do I get rid of an ugly white line around areas of type?
Hello InDesign forum, Attached is a screenshot of a pdf file I created of a brochure I designed. Actually, it's just one panel of that brochure. In that panel there are unsightly white lines that appear around areas of type. I have yet to find a way
-
How to change optimised hidden parameters in Oracle 10g.
Hello Gurus, SAP suggested me to change the following parameter values in Oracle database. But I am unable to make change in this parameter. The parameters are mentioned as below. Name 1> btree_bitm
-
i have a i tunes card, and have rubbed the code but it smudged so icannot retrieve it, what do i do know. john