When I execute the APD I am getting error?

When I execute the APD I am getting below error.
Pleasse help me to resovle this.
Duplicate records when writing data to DataStore object ZO08_ABC
Message no. RSAN_RT551
Diagnosis
During data processing, one of the analysis processes does not guarantee the uniqueness of data records in terms of the key fields they may have. One of the DataStore objects, however, has key fields. When data is written to DataStore object ZO08_ABC there must only be one data record in the key fields for each characteristic combination.
System Response
The analysis process is terminated because it is not possible to save all the data in DataStore object ZO08_ABC
Procedure
Check the definition of the analysis process and make any necessary changes. Redefine the analysis process in such a way so that the update does not produce duplicate data records. You could ensure against duplicate data records by proceeding as follows:
Check whether all key fields are filled correctly in the field assignments on the data flow arrow that enters the DataStore object.
Insert an aggregation node in front of the DataStore object and aggregate the data to match the key fields of the DataStoreobject. In the settings for the aggregation node, use the key fields of the DataStore object as grouping fields and all other fields as aggregation fields.
Points will be definitely assigned.
Thanks,
Vasu

Hi,
The values in query may have different combination of characteristics.. may only few of those are Key field to the ODS.
So Wen you display data , you can select the Key fields and sort.
And about aggregate...
Eg:
report values
X       y        z    K1
aaa  bbb  ccc    10
aaa  bbb  ddd     20
now ODS has X y as key field then load wil fail as u can see 2 records from report/query
So wen you put aggregate block on query ( and filter with z or not present in ODS)  out put then
X            y          z  (filtered)         k1
aaa      bbb        ccc                     30
if you need the Z value then i think you need to use transformation.

Similar Messages

  • When I start the Mozilla Firefox I get error message "ReferenceError: Globalstorage is not defined." How to solve this problem?

    When I start the Mozilla Firefox I get error message "ReferenceError: Globalstorage is not defined." How to solve this problem?
    -Vinayak

    Disabling Samsung Caster add-on solved this issue for me.

  • How do I get a licence for Photo shop which ran out (they didn't tell me that when I bought the MacBook Pro - I get error 150/30

    how do I get a licence for Photo shop which ran out (they didn't tell me that when I bought the MacBook Pro - I get error 150/30?

    Download Adobe's License Repair Tool: Error "Licensing has stopped working" | Mac OS
    Additional information you may find useful: http://blog.erikphansen.com/adobe-cs4-error-15030-aka-i-hate-adobe-reason-34/

  • While executing the t-code OMT3R getting error

    Hi,
       I am a basis consultant, one of my user getting the following error.
    while executing the t-code OMT3R, he is getting the error "Do not make any changes (SAP entry)" (Message no. SV117).
    His system configuration is :
    SAP ECC6.0
    SAP_ABA              700                     0011     SAPKA70011
    SAP_BASIS      700        0011     SAPKB70011     
    ST-PI     2005_1_700     0002     SAPKITLQI2     
    PI_BASIS     2005_1_700     0011     SAPKIPYJ7B
    SAP_BW     700     0012     SAPKW70012
    SAP_AP     700     0008     SAPKNA7008     
    LCAPPS     2005_700     0001     SAPKIBHD01     
    (LCAPPS) 2005_700
    SAP_APPL     600     0008     SAPKH60008     
    can anybody tell me the cause of the problem. please give me a solution to the issue.
    Thanks
    Madhuri.

    Dear All,
    The Issue has resoloved  for Referec look in to the SAP_Note- SAP Note 162991
    Thanks a lot for your great support on this issue.

  • When I start the installation process, I get error code 1. This is my first time buying or trying this program, though my computer says it just downloaded 3 times today.

    I keep getting error code 1 when trying to install the software to my computer. It also downloaded 3 times today and won't go directly into the setup mode. Ideas? Suggestions?

    Cassandrab14701469 please utilize the steps listed in Error "Failed to Install" Creative Cloud Desktop application to resolve the current error.  Error 1 is often a file permission error related to the folders and files which need to be updated.  Please feel free to update this discussion if you have any questions regarding the steps listed within the document.

  • Error when i execute the webservice /SAPAPO/SDM_PARCRTRC

    hi,
    I am getting this error when i execute the webservice /SAPAPO/SDM_PARCRTRC for product availability. please tell me where am i going wrong ..... ? wat parameters are missing ? how to interpret this error?
    An error has occurred. Maybe the request is not accepted by the server:
    XML Serialization Error. Object content does not correspond to Schema restrictions of type [http://sap.com/xi/APO/Global][/wsdl:definitions/wsdl:types/xsd:schema[3]/xsd:complexType[3]/xsd:simpleContent/xsd:extension/xsd:attribute[1]/xsd:simpleType].
    Quick response will be appreciated

    hi,
    due to the bad formatting of your posting it is hard to read. you might consider to use the code tag to enhance readability. moreover, 'executing a webservice' is a bit a vague description of what you do. are you consuming this service with any client program and this is throwing the exception or are you testing the webservice with any 3rd party tool and this is a server error returned to you?
    anyway, I think you ttry to consume that service from within ABAP and the error message says a lot despite of its bad readability:
    The client ist serializing a message (creating it from parameters) and is provided some argument for a parameter which doesn't conform to the WSDL. E.g. the WSDL declares some parameter to be an integer and between 0 and 100 and you try to supply it the value 234. THis would most probably result in your erromessage. or the WSDL says integer and you provided it a string (e.g. like 'foo' or '234').
    anton

  • Workflow issue - When i execute the workitem it just disappears

    Hi
    i am learning workflow. i am just following some instructions on one of the tutorials and i developed a simple workflow for editing material number when a material is created. i create the material in mm01 and the event gets triggered and i get the work item in my inbox. When i execute the workitem it just disappears and comes into my outbox. I am not able to go to the edit screen of the material( mm02) what am i missing? if i only use task then it works fine without any issues, if i include the same task in a workflow and trigger it does not open mm02. plz help
    ~Suresh

    Have you checked the workflow log ?
    If not in your business work place, got to Outbox --> Work Items executed by me
    The click on the workflow log button. Analyze the log.
    There are various reasons why this can happen, so cant really say much about why this issue is occurring without more details.
    Also you will probably get better answers if post this in the Workflow forum than in the ABAP forum.
    Regards,
    Srihari

  • I downloaded Firefox 4 onto my PowerPC G4 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application "Firefox" because it is not supported on this architecture. I can't find my Firefox 3.6.16 I'm on Safari.

    I just want to download Firefox 3.6 again
    I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.

    Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.

  • I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My Icloud is tuck on my old email adress. i can not retreive the password becaue when i request the email it doent get sent to thi adress. how can i change it sothat my icloud is on my new email. i cant login or out of icloud now.

    My Icloud is tuck on my old email adress. i can not retreive the password becaue when i request the email it doent get sent to thi adress. how can i change it sothat my icloud is on my new email. i cant login or out of icloud now.

    To change the iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

    when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

    Hi Michael
    These are the answers
     to your questions
    What is the OS version, Windows Server 2008?   
    Microsoft Windows [Version 6.0.6001]  
    SP1
     On which disk you choose to install it, the C: drive? 
    I have Raid 5
    What
    is the output of the Checkdsk?   It find Nothing
    Could
    you please upload us a screen shot?  I have no 
    Screen shot
    Is
    the C: drive is a external drive?  NO
    Besides,
    have you manually assigned the drive letter? 
    NO
    Thanks

  • My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. Please help.

    My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. In the past when I have updated successfully, the spinning circle would show me an indicator of time left on the update. I no longer have this Indicator. The circle just spins and times out and nothing happens. I've reset the iPad in the settings menu, reset the router, logged in and out of Apple id, powered ithe iPad off and on, and tried a couple other "fixes" that I've read online. So far no luck. AAny help would be greatly appreciated. Much thanks!

    How much free space do you have? If it is low, installers may not be able to run properly.

  • When trying to sign into the Itunes Store I get error message "Itunes store not available at this time- please try again later". I've updated everything and still can't get in. Any ideas??

    When trying to sing into the Itunes Store I get error message "Itunes store not availble at this time. Please try again later" I've updated everything and doesn't help. Anyone have any ideas?

    Send a PM(Private Message) to ATT Uverse Care.

  • I  made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?

    I  made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?
    I have a MacBook Pro with the latest operating system, trying to configure a Gateway flat monitor with vga.
    Thanks

    Apple menu -> System Preferences -> Displays.
    System Preferences can also be found in the Hard drive -> Applications folder.
    Resetting the PRAM can help bring displays back to factory settings if you can't find what you need:
    http://support.apple.com/kb/ht1379

  • Since I updated my iPad 2 to OS 8, when I hit the home key, I get a "sign in to iCloud" message. When I enter my password, it doesn't take it but Settings shows I'm signed in to iCloud.....not sure why

    since I updated my iPad 2 to OS 8, when I hit the home key, I get the message "sign in to iCloud". I enter my password but it doesn't take it. When I go into settings, it sows iCloud is on. Nor'easters sure how to stop this

    Try signing out and signing back into iCloud. This worked for me.

Maybe you are looking for

  • ICal is no longer synching events

    My wife has an iCloud account where all of her calendars are stored. I subscribe to them and receive them on my iphone and MacBook through iCal. When trying to update her calendar on my MacBook Pro, I get the following error : There was an unexpected

  • InDesign CS6 Crashes When I Make a Cross-Reference

    I've downloaded CS6 from the Cloud, and have been quite happy with it, until yesterday when I attempted to do a simple cross-reference to create endnotes. I use Bob Bringhurst's method -  http://blogs.adobe.com/indesigndocs/2009/03/endnotes_in_indesi

  • Distorted Audio-Captured too loud through mixer

    I have a video that has a man speaking and most of it is distorted. It sounds like he is mumbling. The problem occured because the audio was captured too loudly through the mixer. I have tried different filters but none have seemed to work. I have al

  • Batch Population while creating PO

    Dear All, I need to populate a value in the batch field while creating the Purchase Order. Pls let me know is there any exit or badi available for populating the batch field while creating the Purchase Order. Regards, Shanmugam

  • NetCA failed to install in silent mode

    1. My system - without X 2. I am run runinstaller in silent mode and get error: INFO: Starting to execute configuration assistants INFO: Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/ne