When I finally 'upload' a book from iphoto my computer freezes.  Can you help?

When I finally 'upload' a book from iphoto my computer freezes.  Can you help?

Boot into Safe Mode and try again.
If that doesn't work:
Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Similar Messages

  • My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.

    My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.
    When this happens I need to close down the computer and restart.
    Any ideas ?
    I've got Mountain Lion running.
    I'm on a 13" white MacBook with 8GB RAM installed.
    I recently had a 1 TB hard disc installed at the Apple store.

    can you preview it? -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    If that works fine and you still have problems boot into safe mode and try again
    LN

  • Re: I bought an app - storytime for kids, it had just two books and i downloaded three more books but when i tried to download the fourth book the app is not responding. can you help me? thank you.

    Hi I bought an app - storytime for kids, it had just two books and i downloaded three more books but when i tried to download the fourth book the app is not responding. can you help me? thank you.

    Try force quiting the app.  From the users guide:
    Force quit an app:  Press and hold the On/Off Sleep/Wake button for a few seconds
    until a red slider appears, then press and hold the Home  button until the app quits.
    You can also remove an app from the recents list to force it to quit. See “Opening and
    Switching Apps” on page 23.

  • HT5312 i forgot my security quastion and when i enter my phone number it give me not valid, can you help me please

    i forgot my security quastion and when i enter my phone number it give me not valid, can you help me please

    I assume that you don't have a rescue email address on your account, as described on the HT5312 page that you posted from ?
    If not then how are you trying to contact Support ? You are selecting the country where you and your iTunes account are on this page to contact them : http://support.apple.com/kb/HT5699 ?
    When your questions have been reset use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • Have sound but no picture when i click on the video.Elements 10 on windows 7.Can you help.

    Have sound but no picture when i click on the video.Elements 10 on windows 7.Can you help.

    Bigal.seamills
    What is the driver version for your NVIDIA GeForce GT640?
    There is a known issue specific to Premiere Elements 10 and NVIDIA GeForce. The Announcement at the top of this forum tells it all - detailed description of problem, references, fixes, and fix details.
    The following is a copy paste of that Announcement....
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card
    and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your
    first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that
    it is up to date.  
    Since October 2013 to the present, there have been a growing number of reports about display and
    unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer
    has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back
    the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver
    roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10.
    Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.   
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675  
    Older NVIDIA GeForce drivers can be found  NVIDIA Driver Downloads - Advanced Search   
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for
    the driver roll back can be found  http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    Please refer to the following for the driver version history of your NVIDIA card
    Based on history, you should be using
    GeForce 320.18 Driver
    320.18
    May 23, 2013
    Please review and consider and then let us know the results.
    Thank you.
    ATR

  • The product I bought its not working as i expected, it doesn´t translate the exact information from pdf to excel, how can you help me or how can you return my money back....

    how can you help me

    What about adobé export PDF. ?
    Enviado desde mi iPhone
    El 07/05/2014, a las 23:00, Claudio González <[email protected]> escribió:
    The product I bought its not working as i expected, it doesn´t translate the exact information from pdf to excel, how can you help me or how can you return my money back....
    created by Claudio González in Adobe Reader - View the full discussion
    If you bought Reader, you were swindled, because it's a free program. And it has never been able of converting PDF files to any other format.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6363992#6363992
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Can't Print Book from iPhoto or Preview, but Can Print from Adobe Accrobat

    I have spent 2.5 hours on the phone with HP, an am now unsure if the problem is with HP or Apple.
    When I try to print a single page from an iPhoto Book (or a group of pages), I receive an error message on the HP 4650 printer (49.4C02). I saved the book as a PDF and tried to print from Preview with the same results. I then opened the PDF file in Adobe Acrobat and WAS able to print. I am able to print individual photos from iPhoto.
    I searched this discussion board for problems printing to the HP 4650. One suggestion was to use the driver for the HP 4600. I tired that and it produced the same error on the printer.
    Using Adobe Acrobat is a viable work-a-round, but I am curious why I cannot print a book from iPhoto. Any thoughts as to why Adobe Acrobat works and iPhoto and Preview do not?
    Thanks,
    -Dale

    HP has _ a firmware release that addresses this error _ - have you installed it?
    LN
    Message was edited by: LarryHN

  • CS5 requires Java SE 6 to run on Yosemite, install of Java 6 from apple site fails. Can you help?

    CS5 requires Java SE 6 to run on Yosemite, install of Java 6 from apple site fails. I get as far as final click to install but nothing happens. Can you help?

    LOL !     
    Gregory, I wasn't "asking" anything.  I just provided a link to the OP.  Click on what you thought was my question.  It's a link with the answer!
    I don't need any "good luck".  Try to be a bit more astute before responding to a non-question.

  • I cannot open pages;  I am told I can't open pages while updating. I did not know I was updating.  I cannot open a new pages document.  My menu list is ok, but when I click on a document it won't open. Can you help?

    I cannot open pages.  The message says, can't open pages while being updated.  I did not knowingly update anything.
    The program is stuck in this mode. can you help?

    Your copy of Pages may have gotten stuck when downloading. This article explains how to fix a stuck Mavericks download; the same procedure should help with any application:
    How to fix broken Mac OS X Mavericks download issues | Digital Trends 
    http://www.digitaltrends.com/computing/how-to-fix-a-broken-os-x-mavericks-downlo ad/

  • When opening a pdf file it views as garbled letters.  Can you help?

    Having trouble.  I recieved an email with an attached pdf file and when I try to open it, it appears all garbled.  I have tried opening it on my ipad and it appears fine there.  On my desktop, not so well.  Can you help?  I have upgraded to the most current verion of adobe.

    On the desktop, what is your operating system & version?
    What is your Reader version?
    Does the PDF actually open in Adobe Reader?

  • HT1338 I'm trying to attach my MacBook Pro to an overhead projector and can't get it to work. If I go to System Prefs/Displays, I see the box on the screen.  But when I collapse the Prefs the desktop is not seen. Can you help?

    I'm trying to get an overhead projector to identify my macbookpro.  If I go to Prefs and select screens that dialogue box comes up on screen.  So I know there's nothing wrong with the VGA cable.  But when the screen box is collapsed nothing happens.  My computer is not recognized by the projector.  Can anyone help? 
    On a PC I used to hit "control F5.  But I don't believe that works on a MacBook. Any suggestions?

    About the only thing you can try is using the Online Internet Recovery system to reinstall Lion on your Mac over the top of the current install. that will reset all system files and should not touch your personal files or the apps you have installed.
    Or iof you have a recent Time Machine backup use that to restore your Mac to that point in time.

  • When using firefox, table lines are displayed in a pdf document when I set them to backround colour not to display borders, can you help?

    I am an Web Designer and create PDF files for download from the sites that I develop. I use version 19.0 of Firefox.
    Included in these PDF files are tables which display certain data, and I have made some table columns wider with the fill colour the same colour as the table border colour.
    Recently table borders have appeared in the filled in areas, which I do not want to happen.
    Also the look of the Adobe Reader is different in Firefox. and normal in IE and Opera browser which I also use.
    So overall, the the PDF file is not being displayed correctly in Firefox. If I could I would have attached a screen dump of the display error, to help. Can you offer a solution please?

    The same problem here, this started with the latest version.
    I found a temporal solution which is change the default "previewer" in the Options -> Applications tab
    You need to install the Adobe Reader Plugin described [[here|http://support.mozilla.org/en-US/kb/use-adobe-reader-plugin-view-or-download-pdf-files]].

  • When trying to upload a picture from iPhoto my browser, chrome and safari crashes

    Happens every time I try to upload a picture. Also, when uploading a photo, my albums do not appear, just the photos themselves in order from newest to oldest.

    This is a shot of the Crash report
    Process:               Google Chrome [329]
    Path:                  /Applications/Google Chrome.app/Contents/MacOS/Google Chrome
    Identifier:            com.google.Chrome
    Version:               38.0.2125.104 (2125.104)
    Code Type:             X86 (Native)
    Parent Process:        ??? [1]
    Responsible:           Google Chrome [329]
    User ID:               501
    Date/Time:             2014-10-20 11:25:37.592 -0400
    OS Version:            Mac OS X 10.10 (14A389)
    Report Version:        11
    Anonymous UUID:        460A78D1-9EE8-0A1C-EA63-3B79F5F581F8
    Time Awake Since Boot: 4600 seconds
    Crashed Thread:        0  CrBrowserMain  Dispatch queue: com.apple.main-thread
    Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes:       KERN_INVALID_ADDRESS at 0x000000000000005c
    VM Regions Near 0x5c:
    -->
        __TEXT                 000000000008f000-0000000000090000 [    4K] r-x/rwx SM=COW  /Applications/Google Chrome.app/Contents/MacOS/Google Chrome

  • When trying to export a slideshow from iphoto it is freezing at the end. what could be the issue?

    We have a slideshow we created in iphoto. How do I burn it in idvd. I cannot get the export to finish, it stalls towards the end. We have less than 200 photos. We were able to do it once now it will not complete the export process. A ny help would be appreciative.

    Hi barbara10,
    so far I do not know "Live Media Type", I guess Export your slideshow for "HD1080p" or for Codec: H264
    should be OK for iDVD.
    This belongs to German Version of Aperture.
    Did you create the slideshow? Was it a external slideshow?
    Hope this helps
    Uwe

  • When trying to upload ios5 I get an error (-43)? Can someone help?

    Can somehelp guide me through this upload of software ios5 for my Iphone 4. It starts to do it then it automatically stops and says error cannot upload (-43). What can I do? Thanks!

    troubleshoot it like any generic error message since there's no specific troubleshooting for this one..
    Update and restore alert messages on iPhone, iPad, iPod touch and Apple TV (2nd generation)    (error codes)
    http://support.apple.com/kb/TS1275

Maybe you are looking for

  • Signatures in Adobe Reader

    Can someone point me to where the enable signatures in Adobe Reader is located in Acrobat Pro X? I am trying to send a document and although it appears it can be opened in reader, it is not allowing signatures. Thanks, Michael www.vtrainingroom.com

  • How to call Copy.GetItem Method in Excel vba function

    Hi, I want to use sharepoint copy services to download/upload or retreive field information of a sharepoint file. For that i want to sharepoint web services. One class among them is copy. I want to call the GetItem method present in that class. Think

  • Linking two different Hierarchies

    Hi,    i have got two external hierarchies for 0Material. i want to link one of the hierarchy to the other at level 4 as both of them are same after level 3. is there any possible way two link both of them. Thank you, Ravi.

  • How to list the datasources without use a tnsnames.ora file?

    Hi, I want to use the OracleDataSourceEnumerator class of ODP.Net to list the datasources on which the user can connect. It's work with a tnsnames.ora on the local station, so good. But I want use the easy connect naming methode so i have edited the

  • WebHelp stripping out form action

    I have a form in my documentation where users may fill out questions, click a "Submit" button, and it is emailed to me. I remember testing this a few years ago and it worked great. Recently, someone contacted us to say he never heard back from his fo