When I forward mail with attachments, all signatures turn into attachments

When I forward an email that contains a signature from the sender, and I add an attachment, the entire signature turns into an attachment when the recipient is using Outlook .
Is there a way around this?
I have tried Plain and Rich text settings, as well as all of the attachment settings.
Attachment Tamer isn't working since I upgraded to Yosemite.
Thanks.

hi there,
have you found a solution to forwarding the message with an attachment??
If so, could u please forward me the codes.
Thank you,
Renuka

Similar Messages

  • I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

    I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

    Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
    Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

  • Encoding problem when forwarding mails with attachments using exchange account

    Hi,
    I'm facing a special misbehaviour of mail. Scenario: With Apple Mail 7.2 I would like to forward an exchange mail with attachments. The mail is wirtten in german and uses german special characters like äüöÄÖÜ. During editing the mail everything is ok which means all characters are shown in thte correct way. When I send the mail, something magic must happen in the background.
    When I look in the sent mail folder and open the mail, all special characters are show as "?". Must be an encoding problem, I gues but I don't know how to fix it.
    When I send exactly the same mail with another Apple mail account (non exchange), there is no problem. So I assume it has something to do with handling exchange accounts under Apple mail.
    Any idea to solve this issue? Thanks in advance.
    Br,
    Jakob

    This is a know issue with Yahoo! Email on the iPhone. When sending email, sometimes it will say it has been sent, while it really has not (and it will not show up in the sent folder).
    It has been discussed quite a bit in the forums, so a search will turn up a lot of discussion, but no solid solution. Some say Yahoo is working on a fix, other that Apple is.
    The most common solution (which is usually temporary), is to either reboot your phone, and/or delete and reinstall your Yahoo! Mail account on your phone.

  • When syncing iPhone 4 with new update songs turn into "other" files

    Hello,
    Yesterday i upgraded the iphone software to ios7, after doing this everything was working well but when it tried to sync my music files from itunes it said it was syncing music file until the iphone had synced completely when they turned into "other" files.  I ahve tried restoring it but nothing has worked and it keeps happeneing.  Was wondering if anyone was also having this problem and could point me in the right direction.
    Thank you inadvance.

    So far there is no fix, there are many threads on this topic and many people with this problem. We are all ticked off and Apple needs to fix this ASAP. They don't seem to care.

  • Crash when I send mail with attachments.

    Having upgraded to 10.6, when I send an email (through Mail) which has an attachment, Mail will crash. This is bad. Bad, Bad, bad,bad, BAD! Almost every email I want to send has to have attachments, and so mu mail has (effectively) been crippled.
    This is something I need a solution to YESTERDAY!

    I have the same problem, but its not limited to Mail. whenever I attach a file to mail or entourage or import to word, or upload via facebook or safari, i get a crash
    any help on this issue would be advisable

  • I receive and e-mail with attachments but when I forward them, the attachments are smaller. how to fix this?

    I receive e-mails with attachments, but when I forward them the attachments are reduced in size.  What do I need to do to have them forwarded the same size as I received them?

    If the attachments are photos, when you forward them, look on the bottom right of your compose window, change to "actual size".  It's probably set to small as displayed here:
    Regards,
    Captfred

  • I get an error when I try to forward e-mails with attachments.  Advice?

    I have tried many different ways to forward e-mails with attachments to no avail.  I sometimes get a question if I want to include attachment or not.  When I answer yes, I sometimes get an error message and at other times the forward goess through, but without the attachment.  Help!

    No I have not checked the IOS version requirement but I have a similar c2940 where the upgrade was no problem.
    Here is the sh ver output:
    Cisco Internetwork Operating System Software
    IOS (tm) C2940 Software (C2940-I6Q4L2-M), Version 12.1(13)AY, RELEASE SOFTWARE (fc3)
    Copyright (c) 1986-2003 by cisco Systems, Inc.
    Compiled Thu 26-Jun-03 18:33 by antonino
    Image text-base: 0x80010000, data-base: 0x805BA000
    ROM: Bootstrap program is C2940 boot loader
    31-kjeller-adm uptime is 8 weeks, 6 days, 1 hour, 40 minutes
    System returned to ROM by power-on
    System image file is "flash:/c2940-i6q4l2-mz.121-13.AY/c2940-i6q4l2-mz.121-13.AY.bin"
    cisco WS-C2940-8TF-S (RC32300) processor (revision B0) with 20778K bytes of memory.
    Processor board ID FHK0806Y07R
    Last reset from system-reset
    Running Standard Image
    9 FastEthernet/IEEE 802.3 interface(s)
    1 Gigabit Ethernet/IEEE 802.3 interface(s)
    The password-recovery mechanism is enabled.
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:0F:24:50:CE:40
    Motherboard assembly number: 73-8783-05
    Power supply part number: 341-0085-01
    Motherboard serial number: FOC08051PPK
    Power supply serial number: HIC0802020C
    Model revision number: B0
    Motherboard revision number: A0
    Model number: WS-C2940-8TF-S
    System serial number: FHK0806Y07R
    Configuration register is 0xF
    Ole Martin

  • Mountain Lion mails with attachments on exchange get lost

    Dear Community,
    we encounter a real annoying and weird issue with CS6 on our Macintoshs using Mountain Lion 10.8.2.
    It all started, that mails with attachments (e.g. JPGS, PDFS...) just get lost and do not arrive. Not all mails but some, spontaneously. But always the same files were affected. Some work, some not.
    Our company is using Exchange, and there is no message back to the sender, that the mail did not arrive. You can even see it on sent items and it occurs in Outlook 2011 as well as Apple Mail. I contacted our IT and they checked the Exchange logs and everything is fine, like the mail would have arrived, bit it does not.
    We went crazy and tried almost everything, clean OS installs, new users... the funny thing: when you forward the mail out of "sent items" it arrives...
    Today a milestone appeared while troubleshooting this issue: We realized, that only files saved from Photoshop, Indesign, Illustrator (basically CS6) are affected. When I save a PSD as a JPEG out of Photoshop and mail it as an attachement it gets lost. Always. Same for PDFs or other file formats out of CS6.. When I open a PSD  on embedded Mac Viewer and export as JPEG or PDF it does arrive the sender. So it only happens when saving the files out of CS6.
    So now, I have no clue how to proceed. Is anybody else having this issue or can help us? It is a mess, because it turns our daily work to a horror.
    Any help is appreciated solving this weird issue. Thank you so much.

    Hi ,
    You can try setting the below value to false and see the results too since its exceeding the recipient thread limit could be a problem with the throttling as well.
    <add key="MailboxDeliveryThrottlingEnabled" value="False" />
    Restart the transport services after the change and see the results.
     Good Luck :)
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com
    Hello, thanks for the try,
    tried the change in edgetransport.exe.config. Restartet the 4 transport services (Transportdelivery,transportsubmission, transport and transport logsearch) No change though. Problem still exists. May this go into msexchangethrotteling.exe.config? 
    Regards
    Michael

  • In Exchange 2013 i cannot open mails with attachments greater than 19.6 MB in EWS or OWA

    Hello,
    i have in Exchange 2013 CU3 on Windows 2012 the following problem :
    When backup mails using EWS i get the message " EWS Error Code : ErrorMessageSizeExceeded." in mails with attachments greater than 20.137 KB ( 19.6 MB).
    Then I checked all the settings of the EWS , but the defaults are already significantly higher than these 19.6 MB (Base64 approximately 26.5 MB)
    web.config ( maxAllowedContentLength = " 85000000 ").
    Settings of the MaxSendSize and ReceiveSize are 300MB .
    All requestfiltering settings in IIS are set to 85MB.
    When i access via EMS or OWA , file attachments over 19.6 MB can not be opened .
    However, the preview shows in OWA the correct mail including attachment and it can be saved from the preview up to the set maximum size.
    By double clicking on an email in OWA bigger than 19.6 MB i get the following error message:
    "Error : Your request can not be completed right now Please try again later . . "
    Send and receive mail can also be up to maxsize .
    When accessing via Outlook , this problem does not occur.
    i hope anyone here can help me
    Thanks in advance

    Hi,
    To change the maximum message size for Outlook Web App clients, you need to change the value of
    maxAllowedContentLength, maxRequestLength and both instances of
    maxReceivedMessageSize by editing %ExchangeInstallPath%ClientAccess\Owa\web.config in notepad.
    To change the maximum message size for Exchange Web Services clients, you need to change the value of
    maxAllowedContentLength and all instances of maxReceivedMessageSize="67108864" in %ExchangeInstallPath%ClientAccess\exchweb\ews\web.config.
    When you are finished, save and close the Web.config file. Also need to restart IIS by running the following command:
    IISReset /noforce
    For more information about Configure Client-Specific Message Size Limits on Client Access Servers, please refer to:
    http://technet.microsoft.com/en-us/library/hh529949(v=exchg.150).aspx
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Receiving mail, but can't send mail with attachments?

    Hello,
    I can't send mails anymore, I have been able to send some without any attachments (i.e. reply doesn't work as it automatically attaches the original text). This started 3 days ago. Also, my mail doesn't seem to recognize powerpoint and word docs., but I a know the people who have send me such files do not have VISTA. When I choose "open with" then it works. So I have 2 problems, one being moe urgent then the other.
    1) can't send mail with attachments
    2) .doc (word), .pps (powerpoint)attachments are not always recognized.
    thank you all!!!

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • Cannot move mail with attachments

    I was helping a friend prepare to eventually delete her hotmail account from Mail on her iPad. She did not want to lose any mails, so we were moving messages from her hotmail inbox to her gmail inbox. Moving the messages was uneventful until we came to messages with attachments. Any mails with attachments will not move. When trying to do so, we get an error message that simply says the mails cannot be moved...but gave no reason why (really helpful). They're simply stuck in the hotmail Inbox and cannot be moved out. Anybody have a clue what's happening here?
    In a worse case scenario I told her we could forward those messages to her new account and then just delete them from her hotmail account. By doing so we'll save the messages, but the messages won't appear in the new inbox according to when they were originally sent, but rather by when they were forwarded. Being able to move them would be the proper solution, but it simply won't work.

    Perhaps the mail server has a size limit that it allows. Might try a free web service and see if that will work for those attachments.

  • Mail with attachments sent from smartphones with android and ios using activesync stuck in outbox

    A customer replaced bleckberry used from salesman and representatives with Samsung smartphones
    Customer has Exchange Server 2007 SP3 with roles HUB, CAS and Mailbox and a firewall with policies publishing all Exchange protocols.
    While the customer used the BlackBerry Enterprise Server connected to Exchange Server smartphone could potevano send email with attachment without problem.
    Now using smartphones with Android or iOS and ActiveSync protocol mail without attachment are delivered but mail with attachments, no mind what size the attachment are, are not delìvered and the mail stucks in ther outbox for ever.
    Furthermore if smartphones receive mail with attachment and forward it the mail is delivered!
    Any advice on this really strange behavior?
    Nicola  
    Nicola Papapicco

    Hi
    Are the iOS versions the latest? Is it only the newer Android devices or older ones?
    What rollup for exchange 2007 SP3 are you on?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Forward mail with attachment (not WorkItem) from SBWP to Outlook

    Hallo,
    we want to forward mails (not WorkItems) form SBWP to Outlook.
    The forwarding works fine for the mail but if the mail includes an attachment from type object  (e.g. send object with note in MM03) we are not able to open the object in the mail. We want to open the object so that automatically SAP GUI is started and the corresponding object is shown in SAP.
    In SBWP we are able to open the attachment in Outlook not. Are there any settings in SAP where we can define that.
    Have we to define something parameters of the Integrated ITS?
    We want the same behaviour for mails with attachments as for WorkItems if they are forwarded to Outlook.
    We get an HTML mail in Outlook like
    If you are not forwarded automatically, use the following link:
    If the link is not to a valid server, log on to the SAP system and check the following object:
    System: XYZ 
    Client: 300 
    BOR Object Type BUS1001006 
    BOR Object Key 0000700075 
    But there is no link to follow in the mail and nothing happens.
    Thanks
    Edited by: Arnfried Doetsch on Sep 29, 2010 10:28 AM

    Hello,
    Check if your SMTP node in transaction SCOT is configured to send attachments of all types.
    Have a look at the following link:
    http://help.sap.com/saphelp_47x200/helpdata/en/08/e043c4c18711d2a27b00a0c943858e/frameset.htm
    Regards,
    Siddhesh

  • How to send mail with attachments - ALBPM 5.7

    Hi All,
    I am new to BPM,
    Someone could help giving me a example of Send Mail with attachments in Aqualogic Studio 5.7?
    thanks,
    Renata

    nombrefichero="C:\\Temp\\test.doc"
    subject as String="Subject"
    message as String="Message"
    mailAttachment = Fuego.Net.MailAttachment(source : BinaryFile.readToBinaryFrom(name : nombrefichero), fileName : "test2.doc")
    mailAttachments[0] = mailAttachment
    correo as Mail
    correo.attachments = mailAttachments
    correo.contentType = "text/html"
    send correo
    using from = "[email protected]",
    recipient = "[email protected]",
    subject = subject,
    message = message

  • Problem sending mail with attachments???

    Hi Everybody,
    I have got a problem sending mail with attachments...
    I am able to send a plain mail ... but when i am trying to send mail along with an attachment ... its not being sent....
    its not showing any error it is simply hanging...
    what should i do?
    If u know any solns please do suggest me....
    Thanks in advance

    activation.jar is already there...
    initially i wrote a swing program as a front end and it was working abs fine... in my sense it was properly sending mails along with the attachments...
    when i changed the front-end to JSP handled by Servlets i am getting a problem...
    and even the swing program stopped working ...
    now swing program is getting compiled but it is hanging at run time showing an exception "Exception occured during event dispatching"
    i dont understand what probably may be the problem...
    if u can trace out, please give me any suggestions
    Thanks in advance and regards

Maybe you are looking for