When I get a message it only vibrates even though all sounds are on and when someone calls the sound works perfectly normal.

when I get a message my iphone 4s only vibrates even though all sounds are on and when someone calls the sound works perfectly normal.

Try a reset. To reset the iPhone, press and hold the home and sleep/wake buttons until you see the Apple logo (ignore the slide to power off prompt). If that doesn't work, perform a Restore via iTunes (from backup).

Similar Messages

  • How can I get rid of this number even though all apps are updated and installed?

    Weird problem - How can I get rid of this number on top right even though all apps have been updated and installed?

    stamatgeorge wrote:
    Weird problem - How can I get rid of this number on top right even though all apps have been updated and installed?
    That doesn't mean that you have updates.
    Not sure how that app works, - normally means you have a notification for that app - what happen when you go into the app?
    If you had update it would be a red number for the app store icon

  • My phone will ring but when I get a text it only vibrates

    my phone will ring but when I get a text it only vibrates my phone will ring but when I get a text it only vibrates even if I go into the settings and browse through the differnt tones it only vibrates

    I took mine to the Genius Bar at Apple and it turned out to be a bug within the phone itself and since it was still under warranty, they replaced it for free.

  • How can i make it so when i send a message on my laptop that it come from my email and when i send a message on my phone is sends as my phone number. i want them seperate

    how can i make it so when i send a message on my laptop that it come from my email and when i send a message on my phone is sends as my phone number. i want them seperate

    Hey mims1212,
    Thanks for the question. You can configure what address you start new conversations from on both devices:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Please note that this will only work for new conversations, and will also be affected if another iMessage user starts a conversation with you (ex. if a friend sent you a message to your phone number, you will still receive that on your Mac, and you will be replying from your phone number).
    Thanks,
    Matt M.

  • Had to have my computer wiped clean due to virus infection. In trying to install acrobat 9, i get a message invalid serial number, even though it is the serial number in my account. What to do?

    Had to have my computer wiped clean due to virus infection. In trying to re-install acrobat 9, i get a message "invalid serial number", even though it is the serial number in my account. What to do?

    there is a lot of info at that link.  by checking that link you'll see that serial number only works for the exact product for which it was purchased.
    ie, if you purchase acrobat 9 std, you need to use acrobat 9 std installation files, not acrobat 9 pro.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I have Lion on my IMac and it is hooked up to I Cloud, however, even though all settings are correct I am not getting auto sync of calendars  to my I Mac from my IPHone 4S or my iPad 1. Neither am I getting Photfrom my IPhone to my I Mac?

    I have Lion on my IMac and it is hooked up to I Cloud, however, even though all settings are correct I am not getting auto sync of calendars  to my I Mac from my IPHone 4S or my iPad 1. Neither am I getting Photfrom my IPhone to my I Mac?
    Can someone set me straight?

    Check system preferences to make sure you have iCal and your photostream checkmarked to TRUE.
    If you still have problems, give us more details.
    Also, make sure the calendar in iCal you're using/looking at is not "On My Mac", but actually an iCloud one.

  • Double-click/Drag-&-drop Photoshop files opens application but not file or I get a message saying that some files in Application Support are missing and I have to reinstall. (Photoshop CS/CS2/CS3)

    This is most commonly due to installing Photoshop CS/CS2 <i>before</i> doing an archive and install of Mac OS10.3 or OS10.4.<br /><br />One solution is to reinstall Photoshop 7/CS/CS3 after you have installed Mac OS10.3 or OS 10.4.<br /><br />If you have Photoshop 7 and 8(CS), the easiest way to reinstall Photoshop (without disturbing the original installation) is to install to your desktop. After the install is done just trash the Photoshop folder on the desktop.<br />Note: This will only work with Photoshop 7 and 8(CS) but not with 9 (CS2).<br /><br />Photoshop CS2 you must delete the Photoshop CS2 folder. If you have any 3rd party Plugins or presets remove them from the folder before deleting. Just placing the folder in the trash will not work it must be deleted. After reinstalling CS2 you can now put all 3rd party Plugins and presets back in the new folder.<br /><br />---------------------------<br />Another solution courtesy Anne Shelbourne<br /><br />Open your Previous System folder. <br />Find "Adobe Unit Types". <br />Copy it into: <Your current system Hard Drive>/Library/ScriptingAdditions/<br />Then reboot your Mac.<br /><br />---------------------------<br />However, if you happen to be running a non-English version, like Photoshop CS CE or Photoshop CS ME, it appears the missing file does not get installed. You would need to install and delete the international English version first.

    The problem you got into is a known problem after updating to Tiger. It is a small 4K file that gets trashed with the update. It is called the Adobe Unit Types. Both Photoshop and Photoshop Elements need this file to function.
    One way to get it back is to reinstall Photoshop, the other is to add this file again.
    You can get the file from here http://www.dd.se/Tips/bildbehandling/downloads/AdobeUnitTypes.zip
    It is only 3,7 KB big.
    You put the file you download here:
    [hard disk] /Library/ScriptingAdditions. If you don't have a Scripting Additions folder, you create it.
    As you trashed Photoshop, you need to completely deinstall it to be able to reinstall it.

  • When I open my Airport Utility I don't always see the airport come up, even though Timeport is backing up AND I can see the time capsule in Finder.

    Version 5.5.2 (552.11).   Updates tells me this is the up to date version, however I keep seeing a window asking me to update to 5.5.3.  I try this and normally receive 'software is up to date'.  Today something downloaded but I cannot remember what.
    Also, when opening up Airport Utility I don't always get to find the airport extreme.  Sometimes I do.   Every time I try I am also able to carry out a backup using timemachine  and can also see the drive on Finder.
    In addition,
    I have a 1TB drive hooked up to the USB port.  I cannot see it in finder even though I seem to be able to see Time Machine Backups under 'Devices',
    I cannot find a way to access the 1TB drive.  I have hooked it to a local USB on my Macbook Pro and it works fine.

    Just bought my Time Capsule today and had the same issue, or actually I did see it at first then allowed some software updates but after I restarted my computer, Airport Utility no longer recognized it. Solution: I had to reset my TC to factory settings by pushing the end of a pin into the Reset button (tiny hole in the back of your TC) and holding a few seconds until the amber light starts flashing rapidly. After that try the Airport Utility again and this worked for me. Good luck!

  • The sound of my iphone has dissapeared when I play games and when i listen to muisic but when I put the headphones the sound come back and I can control the sound,what should I do??

    I was on a boat ride when some water fell on it but it was just a little bit then when i tried to control the sound and volume while playing and listening to music it didn't showed anything and just with headphones it appeared again and i could listen and I could control it again but when i take the headphones out it goes back to the same thing.What should I do??

    try toggling the Ducking menuItem

  • Is it possible to restore lost windows? Firefox crashed, and only 5 of my open windows reopened, even though all settings are such that all should be restored.

    Unfortunately when I restarted Firefox after its most recent crash, most of my open windows and tabs were not restored as they are set to do and as they usually do after a crash. Not that I enjoy Firefox crashing, but usually everything reopens and life goes on. However, after a crash tonight, when I next opened Firefox about 80% of my open windows and tabs did not reopen.
    After this (most recent) crash most of my windows and tabs were not restored:
    bp-e7f145b9-04cf-4de8-a4a4-8e2952130816
    This was the most recent prior crash where my windows and tabs were restored:
    bp-c674bdd3-e905-44c0-9bc9-6b4982130815
    **I would love to have these windows and tabs reset, or at least be able to find a list of them to reopen them manually.**
    I am running Firefox 23.0. My antivirus and antispyware were run overnight last night with no issues.
    (This is on my desktop computer using Windows XP. I also have a laptop which runs Firefox 23.0 which uses Windows 7. Firefox on it crashes as well, but thankfully thus far the windows and tabs have been restored. I use it less than I do my desktop, however.)
    Thank you very much!

    Thank you -- I will do so. Still, I'm very eager to restore (or find a list of) my windows and tabs that were not restored after the last crash. Is it possible to do that from the last working restore?
    The last two working restores were after the crash mentioned above, bp-c674bdd3-e905-44c0-9bc9-6b4982130815, and before that, bp-7f5b697e-c4c5-4cb8-9b15-9318c2130815.
    FWIW, I just updated to 23.0.1. Thank you *very* much!

  • I keep getting a message that pops up about every 15 minutes that says server connections interupted.  the internet works fine and is fast.  What does it mean?

    I recently installed a 2TB time capsule and everything works fine but keep getting a server connections interrupted.  What does that mean and how do I get rid of it.
    thanks
    john

    It means Apple have done a lousy job with Lion or ML and TC networking.
    Read this thread from the last post backwards.. there are a number of work arounds discussed.
    https://discussions.apple.com/thread/3526741?tstart=30
    not all work for all people everywhere.. some work sometimes for some people.

  • Am unsuccessful getting my iMac iTunes library synced to my iPad and iPhone. all devices are authorized and have latest software. the device icon is not shown in my toolbar as the tutorial indicates. what next?

    can not get my iMac iTunes library synced to my iPad and iPhone using USB. all devices have latest software. There is no device icon on my IMAC toolbar as indicated it should be in the support FAQs. What advise does anyone have?

    Hello Luckyone1,
    Thanks for using Apple Support Communities.
    If your iOS devices are note being recognized in iTunes on your Mac, please follow the steps in the article linked to below.
    iOS: Device not recognized in iTunes for OS X - Apple Support
    Take care,
    Alex H.

  • Why when mountain lion is downloading it keeps giving me 403 forbidden, even though all systems are up to date?

    I just recently purchased the lastest version of Mountain Lion. I am currently running Snow Leopard 10.6.8 which is the lastest version, and should be compatiable to download Mountain Lion. My computer meets all the requirements in order for the operating system to download, but everytime it gets about halfway through the download it stops and the error screen pops up and says Error: could not download...403 Forbidden. What is going on? I don't know what to do, and I can't get it to download after 4 tries, and all of my programs are up-to-date. What do I do?

    I just recently purchased the lastest version of Mountain Lion. I am currently running Snow Leopard 10.6.8 which is the lastest version, and should be compatiable to download Mountain Lion. My computer meets all the requirements in order for the operating system to download, but everytime it gets about halfway through the download it stops and the error screen pops up and says Error: could not download...403 Forbidden. What is going on? I don't know what to do, and I can't get it to download after 4 tries, and all of my programs are up-to-date. What do I do?

  • Trying to download an app but keep getting asked to accept new terms even though I just accepted them and won't stop

    Continuous loop

    Rather than a "bug" - it appears to be some bizarre issue with the Apple servers that has been going on for a few days now. Users have had a few different issues with the App Store and a couple of them seem to have been fixed, but now this issue has cropped in the last couple of days.
    No matter what we call this - it is not a necessary procedure, it's just fluke thing that needs to be addressed by Apple. This is not normal protocol for downloading apps from the App Store.

  • My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

    My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

    Rodger,
    Thank you for your gracious welcome . . .
    and thank you for your swift response . . .
    and thank you for your information (and encouragement!).
    Yes, I read that too, but searched in vain for the specifity of, say, your direction:
    "Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
    So I shall!
    Again, many thanks.

Maybe you are looking for