When I go to yahoo with my iPhone 6 the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong?
When I go to yahoo with my iPhone 6 the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong? Also the same on boyfriends phone he's eith Virgin and I'm with Vodafone do it cant be the providers.
Thanks for the link but none of those described the problem. No error message pops up. It just says "Accessing Itunes Store" but it never actually does. This only occurs when my iPhone is plugged in though.
Similar Messages
-
Everything I own (iPad, iPhone, mac) is set up on wi-fi. when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!
Windows drivers for Intel wireless cards are known problematic.. If you have plenty of signal and it still cannot keep or hold the connection the issue can simply be the type of wireless.
Another problem is using names that windows does not easily handle.
eg If you set the TC using apple names, like
Fred Blog's Airport Time Capsule wireless24ad12
Then to windows this is too long.. it has spaces and it has illegal character.
Change all names on the TC to suit windows. Short, no spaces and pure alphanumeric.
Also security must be suitable.. I have no idea how old or what OS your dell is, but if you still have issues.. pull off the security on the TC for a test.. if the computer suddenly works, it is not compatible with WPA2 AES. Make sure you also use a password that is mix upper and lower case plus numbers.. avoid special characters and make it 10-20 characters long say.. it is not required to be more than that unless you are paranoid. -
My wifes iphone will not allow her to download from the app store when not connected to the computer. Does anyone know what is wrong?
Resetting your Mac's PRAM and NVRAM
If you have Apple Care you should give them a call. -
Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help meWelcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I have just got an iMac 21" and it continuously freezes when it goes to sleep and also when the internet is trying to load, i have tried three different browsers but it still does it (safari, google chrome and firefox), does anyone know what is wrong?
To fix the freezing when sleeping problem go to System Preferences>Energy Saver and set 'Computer Sleep' to 'Never'. It seems there is a problem for some with Bluetooth failing to wake after sleep. This fixes it 100% for me and many others on here, until Apple issue a software update to address it.
Not sure what to suggest on the internet problem. I assume you are connected and receive and send emails OK.
Edit: To try to troubleshoot the internet issue maybe try turning the Firewall off: System Preferences>Security & Privacy>Firewall tab. -
hi everyone!
i have a macbook unibody and when i put a cd on the dick driver in it doesnt pull it , but when i push it in a little more it push it out!
does anyone knoes what is wrong? or how can i fix it?
thnxI'm not sure about your question, it's seems somewhat unclear, but if the above command doesn't work another you can try is using the diskutil command as follows:
"diskutil list"
or
"df -h"
(without "" quotes)
find where the cd is (usually /dev/disk1 but not always depending on what else you have pluged in)
then simply use the 'diskutil' command with the 'eject' argument specifying the device found from the previous command '/dev/disk1'(or what ever your optical is labeled as).
If this isn't your question, I have a macbook unibody late 2009 model and the strangest thing happends, If I downgrade to 10.6.1 my optical drive works fine anything 10.6.8 and above ejects my disk immediately, I have also tested my optical drive out on other OS's such as various linux distro's. Therefore I have come to the conclusion its a bug. - just food for thought. Hope some of this helps -
Does anyone know what's wrong with my ipod?
Hi, I have a 3rd generation 20Gb ipod that's almost 3 yrs old. Recently the battery life became so bad it would play less than 1 song before dying from full charge, so I bought a new super-life battery from Maplins and replaced the battery. It was a very fiddly job, but their were 2 of us doing it and I don't think we did anything wrong during the process.
Since replacing the battery, my ipod has a great battery life and the first 2 times I used it, it was perfect. Then it started acting very bizarrely. If left unconnected for a few hours, it would restore itself to factory settings, wiping its hard drive. Then on connecting to the computer it would perform a very long-winded check (with an icon appearing on the screen like a CD being examined with a magnifying glass), before I could put the music on again. It did this every time I used it, which was annoying, but I could at least use it in short bursts.
Now however, it will not work at all. Every time I connect it to the computer it does its checking and then either the ipod, the computer, or both will crash. On restarting both, it does the same again. If I start the ipod in disk mode, it appears in itunes and everything, and I can add music, but it just wipes itself again when I put it back to normal ipod mode. I've tried the 5 Rs and all have failed (although my software update didn't work too well, I'm not sure if it actually did it 'coz the software update prog kept crashing).
Basically, can anyone shed any light on what this fault is and how to fix it? Is it a problem with the ipod or something I did to it while changing the battery?
Thanks!
Alix. xx
ibook G3 900Mhz, 640Mb RAM, 40Gb HD Mac OS X (10.3.9) with 3rd generation ipodA. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service. -
My iPhone 4s shuts down at least once a day, usually after I used it or when I'm not using it at all. It will not turn back on unless I reset it (by pressing home/power buttons) and when it turns back on, it runs like nothing happened. I have tried everything I can think of, update iPhone software, iTunes software, troubleshoot on Apple's Support page and reading other user's issues but I haven't seen anything similar. I erased and restore factory settings several times, made different backup attempts and even restored from recovery mode with iTunes. Everything goes great, no error message or anything unusual, until phone is off again, very frustrating. It doesn't seem to have a pattern to it, it happened when no apps were running as well as when a few apps were. The only thing I can think of is I haven't seen this happening when charger cable is plugged it. I don't really care about apps and content on the phone, but my contacts and voicemails are the only reason why I absolutely have to restore from backup, even after setting up a new phone, from iTunes. Other than that phone is brand new, battery is also great, nothing wrong with it (apparently).
I would like to know if somebody knows what this could be, and any ideas on how to fix it. Thank you.Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
Iphone 5 is having trouble focusing when taking pictures.
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
I will hold select, control or try to select all and none of the above work. It does in explorer
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 and later [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Does anyone know what is wrong with flash games?
Whenever I try to load a flash game on any website, it comes up fine. However, when I simply click on a button, it freezes both Firefox and the flash script. I just downloaded FF v3.6.10 and updated Adobe Flash player. It was fine before the 3.6.10 update.
Everything else seems to be fine though...Safe mode did not help. In fact, it made Firefox freeze for longer than in normal mode.. I am also using the default theme..
When I run the Firefox safe mode, it does not come up with the safe mode dialog box like it says in the FAQ.
Edit: Actually, Java was the problem. To fix, go to start> All Programs> Accessories> System Tools> System Restore, and pick the date that you installed Java. That might help anyone who has this problem. -
Does anyone know what is wrong with iTunes today (4/16/13) ?
I keep getting an error message stating that something is wrong with the iTunes network. Anyone else getting that error?
Look at the threads....dozens of people here are experiencing it. SO whatever it is it's cross platforms and versions of the operating systems.
Waiting it out seems to be all folks can do. -
I just got a new phone, I made a backup from my old one and tried to intsall the new.
But it didn't work, is this a system default or is this my phone?Based on your incredibly detailed description of exactly what the chain of events was, including the exact text of all the error messages you received and what state the phone is in now, I'd say the problem is tied to the opposition of the Sun and Mars in the consellation Orion.
Sacrifice a small woodland animal to the gods and make a pilgrimage to Stonehenge. That should take care of it. -
How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.
Ask the headset manufacturer.
Barry -
IPhone 5 screen is black, when I connect to ITunes it says "to allow access please respond to your Iphone". Impossible with a black screen, does anyone know what the prompt is?
Hey 11doski,
Thanks for the question. After reviewing your post, it sounds like the display has a dark screen. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for using Apple Support Communities.
Have a nice day,
Mario
Maybe you are looking for
-
I need to host a Shared PDF on SharePoint 2010. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in
-
Zen Vision M 30GB Problems? I have a used Zen Vision M 30 GB. I have?a few questions, along with some problems. My player has to "rebuild" at least twice a day, is that normal? When a song is playing, is the song name, length of song, etc supposed to
-
File extensions and other formats
I'm having trouble with file extensions when saving AW files in other formats. I suspect it may have to to do with a recent upgrade to 10.5 I have (as recommended in the forum) deleted the AW plist files, but it didn't help. Here are the symptoms: 1.
-
When building an iPad HTML5 app, why does the splash page not work correctly in landscape mode?
I have recently completed an HTML5 web app for the ipad and one of the most challenging things about the process was getting the splash screen to work. I have now succesfully completed the job and the splash screen works, but only under the bizarre c
-
How to call variable which name is stored in a temporary table...
Hi there! Got a simple (?) question. I want to make an allocation like that: n#.temp_z1 := temp#; with the only Problem that the name of the variable is stored in another variable or a temporary table: temp#(1) := temp_z1; at the moment I have absol