When I hook up my airport express I loose internet, but it shows I'm connected and my printer is connected. It does not work though!!!

I set up my airport express and it shows it is properly set up, green light and all... However, it shuts off my internet and does not print through the printer it shoes hooked up. Bummer!!! Help???
Kim

I had similar issues setting up my airport express this afternoon. Finally got it to work by unplugging my cable modem and the airport express at the same time. Then plugged in cable modem, once it was running, plugged in the airport express, and it finally started working.
Per Apple's poor documentation, I had already restarted them individually many times, but doing them together finally got mine working. I was getting very frustrated though.
Hope it works for you too.
Robert

Similar Messages

How do I hook up my airport expresses to my internet that has ethernet from router to computer?

Hello Community,
I recently got new and better internet. In order for the 105 up speed, and 50 down speed to run to its full capacity I had to route my ethernet directly from the modem to the computer. I currently have a Wi-Fi Network that i am operating. Now I am looking to connect my two airport expresses to this new setup.
One surpose being to run my speakers wirelessly and to activate wireless printing. The airport base stations I have are at least 3 years old. They have Ethernet, speaker, and USB connection.
I am wondering how to do this?
The airport expresses are:
1. In the same room.
2. In a different room.
I am wondering if anybody knows how to activate the signal on both airport expresses. Both manually and/or via command lines and PPPoE, or DHCP type setups on the computer.
Has anyone had experience configuring internet in this manner that can help?
Thank you.

Does the modem provide wireless or only wired? If the latter then you need to get a router or use one AEX as your main router and the other to extend that wireless network. Better yet is to get an Airport Extreme Base Station to use as your principal router.

Since I updated my iPad 2 to OS 8, when I hit the home key, I get a "sign in to iCloud" message. When I enter my password, it doesn't take it but Settings shows I'm signed in to iCloud.....not sure why

since I updated my iPad 2 to OS 8, when I hit the home key, I get the message "sign in to iCloud". I enter my password but it doesn't take it. When I go into settings, it sows iCloud is on. Nor'easters sure how to stop this

Try signing out and signing back into iCloud. This worked for me.

I have a HP printer 8600 and airport extreme -- want to print from two computers - does not work

I just bought HP 8600 -- run Lion -- have airport extreme want to print wirelessly from both computers won't work

How are you trying to connect the printer - wirelessly or Ethernet or USB to the Airport?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Leon and I installed the Time Machine does not work. to the Airport Extreme is connected MyBookWorld II. Snow leopard with everything working. Leon sees the drive, but you can not connect to it. can not be seen in disk utility. Thank you for your help or

Leon a Já instalované Time Machine nefunguje. na Letiště Extrémní je připojen MyBookWorld II. Sníh leopard s vše pracovat. Leon vidí pohonu, ale nemůžete se k němu připojit. nemůže být viděn v disk utility.
Děkuji za Vaši pomoc nebo rady
Petr

Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
1) Mount your AirDisk so it appears on your Mac
2) Open Terminal.app
3) change directories to the AirDisk's root folder located in "/Volumes"
ie: cd "/Volumes/AirDisk Name"
4) execute this command to "bless" the drive to be used with time machine:
touch .com.apple.timemachine.supported
5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

I want to have all my tabs return after closing. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked, but it does not work. When I open FF again none of my formerly open Tabs show... FF v.4.

When I open FF up again after I have closed it, I want all tabs to return. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked-does not work. In addition, the feedback window fails to 'Submit...!'

Some things to check:
#'''Browsing history must be saved'''
#*Firefox button: Firefox button > Options > Options > Privacy > [X] Remember my browsing history
#*Menu Bar: Tools > Options > Privacy > [X] Remember my browsing history
#'''Also make sure you do not clear "Browsing History" when using Clear Recent History or when closing Firefox'''
#*Using Clear Recent History
#**Firefox button: Firefox button > History >Clear Recent History
#**Menu Bar: Tools > Clear Recent History
#*When closing Firefox
#**Firefox button: Firefox button > Options > Options > Privacy (checked) > Settings
#**Menu Bar: Tools > Options > Privacy (checked) > Settings
#**See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
#'''Make sure you are not in Private Browsing mode''' or '''in permanent Private Browsing mode''':
#*See: https://support.mozilla.com/en-US/kb/Private%20Browsing
#'''If you have the'''Tab Mix Plus'''extension''', then disable the built-in session restore.

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

√using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

using sucessfully airport express for internet
when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
wanting to use extreme at base and express in another part of the house

How is the express getting internet? What modem is it plugged into?
How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
IPv6 is also needed.. turn on local link.

I just hooked up a airport express as my new router and now I cant play videos on my imac or ipad. PLEASE HELP.

I just hooked a new airport express and now I cant play videos on my imac or ipad. I do have a sprint airave hooked up to the system. I dont know if i have all the cables hooked up right but everything works except playing videos on either device. PLEASE HELP. Thank you

Yea rudegar its weird. I dont have sound either. I have read to put airave behind router but I cant find anywhere how to hook all the wires up. I have 2 ports in the back of the airport express(1 wan and 1 ethernet), 1 port on my modem and 3 ports on the airave(wan and 2 lan). I dont know which cable goes where, wan ,lan, ethernet, back of computer etc. Im an idiot when it comes to all this stuff but Im sure its simple fix but obviously not for me. I read people put modem to router to airave but dont say which port to put them in.

I have an Airport Express, which flashes amber, but when I go to manual set up, it says there's an error and tells me to close configuration?

I have an Airport Express, which flashes amber, but when I go to manual set up, it says there's an error and tells me to close configuration? Once I complete that, the same thing occurs, and there's another error message?

Is this a new AirPort Express, or one that you have had for some time that has now developed problems?
What function do you want the Express to perform on your network?

ITunes shows time out error when trying to play on Airport Express.

Time out error when trying to play on Airport Express. This started with an iTunes update, problems has to be with iTunes, Airport Express appears to be communicating fine, even shows when speakers are not connected.

Same here, though on XP. Have tried cleaning registry, reinstalling, deleting preferences. Created a new user with no library and I have the problem there, too, so it's not the library.
Is there no one to call about this??

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.) I gave the Airport a hard re-start, so I don't think that is the issue. Using Windows 7.

Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.) I gave the Airport a hard re-start, so I don't think that is the issue. Using Windows 7 Ultimate

Looks like I fixed it., thanks to another post I read. I went into my Norton Security. Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow" This also fixed my error (-3212) which would not allow me to connect to the iTunes store.

I am trying to hook up a airport express from a work server that has a assigned ip address. the airport works but no internet

I am trying to hook up a airport express from a work server that has a assigned ip address. the airport works but no internet

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

When I hook up my airport express I loose internet, but it shows I'm connected and my printer is connected. It does not work though!!!

Similar Messages

Maybe you are looking for