When I insert a screen shot or image into the body of an email (not an attachment), why does it not show up after being sent? It works fine in other browsers.

The image will show up in the message when I am preparing it to send, but after being sent either it doesn't show at all or it comes through as a mess of characters.

try reinstalling iTunes.

Similar Messages

Can't put image into the body of Yahoo Email.

Although easily done using I.E or Outlook, any attempt to paste an image into the body of a Yahoo Mail results in nothing happening when using Firefox. I do NOT want to use I.E.
This is a major problem. Attachments are no solution. In many industries, including mine, we like to send flyers as images or IN-LINE documents via email.
Will Firefox / Mozilla address this issue?
Is there a solution already?

I have 2 FF windows open. One to view my picture and one with Yahoo mail. If I click and drag the picture into my Yahoo mail body, it works. Can't do copy/paste like in IE.

How do I insert a flyer made in Photoshop into the body of an email...

I made a flyer in Photoshop, I saved it as a JPG. Then I went into my email client AOL to insert it into the body of the email to send out to my clientele. I sent it to myself first to check the resolution etc. The problem is I cannot get it to keep the orginal aspect ration within the email. I compared it to other flyers sent to me, that were produced in Photoshop, I checked all the specs and everything in them matched mine. When I put them into the email the retained their orginal format. So what am I doing wrong that mine will not. I am sure it is something simple I am not aware of doing as I am new to the program.
Any assistance would be greatly appreciated. I am working in Photoshop CS3 on a Dell.
BJ

What happens if your recipients' email clients do not display images by default? Will your message still get across?
http://www.emaillabs.com/tools/email-marketing-statistics.html#blockedimages
Hopefully, you have no more than 100 recipients to your email marketing as AOL imposes a limit.
The comparison between messages you send and those you have received should be clearly made. Were those messages that you received sent from AOL? Were they sent with the same AOL mail client? Do they use images attached to the message or called from a web server?

Lately, I'm unable to paste any image into the body of any email I compose. I did not have this issue before today. Please help.

Could this issue with not being able to copy and paste any image within the email body, be virus or malware related?
Though I don't think I have any virus problems. Also I have all the latest updates for Thunderbird.
I read some suggestions posted elsewhere and tried those but none of these worked :
DID NOT WORK #1 :
(If your Thunderbird email message is displaying strange-looking code (tags) after each link, images are missing (it looks like images have been stripped out), and the font appears different, or bold, then you’ve most likely changed the message body view inadvertently. To switch it back, simply:
Browse to View -> Message Body As -> and select Original HTML.)
DID NOT WORK #2 :
Email message looks fine, but doesn’t contain images
If the rest of your Thunderbird email message looks okay, but is missing images, or they appear to have been stripped out, it’s very possible that you’ve changed a setting that won’t let attachments (ie. pictures) appear inline (within the message body). To change this back, simply:
Browse to View -> and select Display Attachments Inline. )
DID NOT WORK #3 :
If you made the above changes to your Thunderbird settings and images still aren’t appearing in some of your messages, it may be that Thunderbird is blocking them because it thinks they are spam. To adjust your privacy settings and prevent the images from being stripped out, or not displaying at all (ie. being blocked), simply:
Click on the button to the above right of the email message asking you whether you would like to load images.
If the email message is from a trusted sender, you can click the link above the message specifying you would always like to load images in messages from this particular sender.
DID NOT WORK #4 :
If you’re still having troubles, or your changes aren’t being saved (ie. next time you open Thunderbird the images won’t display again) you can directly specify the default format Thunderbird should display email messages as in the config editor. To access it, simply:
Browse to Tools -> Options -> Advanced tab -> Config Editor
Search for mail.default_html_action and make sure it is set to 3 (allow original HTML). If you would like messages to open as text only (more secure, but you won’t see images, change the setting to 1).
Could you please suggest what possibly has caused this issue? Thank you for your time.

Thank you for your response.
After searching around for any pointers to my problem, the above fixes I listed were the things that came closest to maybe addressing the issue, that I was able to locate. But since none worked, and as you pointed out, it is now clear they will only help towards viewing sent images rather than helping with inserting any images in the body of the email, which is the problem I suddenly started facing today.
Coming to your suggestion, on opening the Write window, the Insert choice on the menu bar is indeed available. And I had already tried using that, by clicking on the '''Insert ----> Image''' option listed. That opens
up the "Image Properties" box but using that has not resolved the matter either. It results in an image box getting inserted within the email but without the actual image itself.
Plus, normally I am able to use the '''Paste''' function in the Edit menu or through right-click, but today the (Cut/Copy/Paste) functions have gone inactive, thereby disallowing me to use that to place an image within the email.

I cannot paste a copied image into the body of an email

I can attach images to an email but I cannot copy and paste them into the email itself. I have been trying to find an Insert button but have been unable to do so. My setting is html, not plain text.
Clive.

Holding the shift key while clicking the Write button toggles to the opposite of what your account settings are. So if your account settings are for HTML, holding the shift while opening a Write window will switch to Plain Text or vise versa.
I am not sure what your issue with making this work is.
Check your account settings and see what your default is set to.
Account settings-Composition and Addressing
Is the option to compose in HTML checked?
Are you using an encryption add on of some kind? They force the composition to plain text.

How do i insert my pdf (with clickable links) into the body of an email?

I do not want to use mail chimp, copy & paste, or take a screenshot. Since I have updated my programs I am no longer able to do this and that seems pretty backwards to me.

What happens if your recipients' email clients do not display images by default? Will your message still get across?
http://www.emaillabs.com/tools/email-marketing-statistics.html#blockedimages
Hopefully, you have no more than 100 recipients to your email marketing as AOL imposes a limit.
The comparison between messages you send and those you have received should be clearly made. Were those messages that you received sent from AOL? Were they sent with the same AOL mail client? Do they use images attached to the message or called from a web server?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!

Why does my Apple Mail insert old messages into the body of new emails?

Why does my Apple Mail insert old messages into the body of new emails? The correct sender's name will appear in the "From" column, but an old message from a different sender in the body. This happens randomly. I have an iMac OSX 10.6.8. I recently had the hard drive cleaned, but Apple Mail seemed to be running fine when I set it up again. Could this be a virus? What should I do about it? Thanks for any insights!

Thanks. While you were replying to my question, I went into notifications and figured
it out. Appreciate the quick response!

Why is the new Safari (7) not letting sound be heard from Soundcloud widgets (players) on my website when the earlier Safari worked fine, and other browsers also work fine?

Why is the new Safari (7) not letting sound be heard from Soundcloud widgets (players) on my website when the earlier Safari worked fine, and other browsers also work fine?

Might be an incompatible extension or plugin ...
Try troubleshooting Safari extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

When i copy a word document into the body of an email, it arrives in a distorted format. what can i do to insure it will arrive in the body of the email as it appears in my word document?

how can i ensure that when i copy a word document into the body of an email, it will arrive in the same format as it appears in the word document. mine arrive with distorted spacing. thank you!!

Sounds like the Word file may have right justification. You can turn that off within Word.
You can also save the file as a pdf using these instructions:
http://support.apple.com/kb/PH10738
and send the pdf instead.

TS3274 Images of the apps in App Store not showing plus images in some apps

The images of the app in the App Store not loading and images in apps that are already loaded not showing, the text and everything else is fine only the images are not loading..?

Hi, Pepe6.
Thank you for visiting Apple Support Communities.
I would recommend closing all applications in multitasking and power cycling the device. Test the App Store after processing these steps.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H.

How do I insert an image into the body of a Yahoo email using Firefox?

I've tried copy and paste from Photobucket, but that doesn't work. I'm asking how to have the image appear in the body of the email, not as an attachment.

In Gmail, simply drag & drop into the text area;
or mouseover the "+" in the bottom toolbar, then click the camera icon.

Why is the iPad inserting letters like vs and bs into the text of my emails? And how do I correctbthis frustration? I did not put the b after the word correct.

When I put text into something it inserts bs and vs intonthe text and other letters which I do not put in there. I must constantly go back and fix what I wrote . Please see the beginning of this... I did not put the "n" into the text it just appeared there. How do I fix this problem? Thank you

This can happen if your other fingers accidentally touch the screen when you are typing. Check to see if you are doing this. "v", "b", and "n" on the keyboard are quite close to where your thumbs might be when you are typing.

Aperture keeps multiple duplicate images in the library file which do not show up in the app

So, I recently had to merge two libraries which have some common images. Although upon import Aperture asked me if I wanted to "Add or Merge" the libraries (I selected "merge", which wouldn't import duplicates), I wanted to confirm there were no duplicates in fact brought in. I ran Duplicate Annihilator, which made a strange claim (about most photos, in fact): it showed a file as a duplicate which had no copies that I could find - searching for it by name revealed exactly one image.
Curious, I searched inside the actual photo library. Imagine my surprise when I found the following files
...Library/Masters/2007/Aug 10, 2007/IMG_0002/IMG_0002.JPG
...Library/Masters/2007/Aug 10, 2007/IMG_0002 (1)/IMG_0002.JPG
...Library/Masters/2007/Aug 10, 2007/IMG_0002/IMG_0002.JPG
which are in fact *exactly* the same image. Meanwhile, to reiterate, Aperture shows only ONE photo:
IMG_0002.JPG
Shocked, I investigated further. In fact almost every single file which was in common between both libraries was "imported but not displayed", which explains why my two libraries of sizes 50GB + 50GB after merger = 100GB when, the two libraries in terms of images had 10k + 12k after merger = 14k images.
Aperture imported all the photos into the new library. But it just opted not to use half of them.
So, now I have a bloated-by-2x library, and of course the frustration with Aperture having made such an insane, bone-headed move. Those files are essentially dead weight which will follow the library around for all eternity.
1) Why?
2) How to fix?
thanks!

I would take a step back here before going further. William's suggestion might very well clean up the library but something obviously did not go right and to start mucking about in the library might make things worst.
For starters I'm surprised to see the folder structure you showed in your first post. Aperture stores managed masters (originals) by import date and time. The structure (in all libraries I've ever seen) looks like:
So something seems wrong with your master folder.
Also the three folders you showed the first and third are identical ( the middle one has the (1) added to which is how the OS handles duplicates in a folder) so this shouldn't even be possible, those folders should not be there.
I'm wondering if this is something left over from your using Duplicate Annihlator. Do you have a copy of the library before you ran the merge and used DA on it? Would be interested to see what the master folder looks like.
Finally when you ran the merge which library did you tell Aperture to use as the master, the one that was used to resolve conflicts?
Again William's suggestion might be all you need to do but it would be good to figure out want went wrong before proceeding.
regards
Message was edited by: Frank Caggiano - A better first step might be to run the Aperture first aid tools, repairing and possibly rebuilding the library.

Recipients of my email have been getting a bunch of scrambled code, letters and symbols, inserted into the body of my email - preceded by "span.IP". How to fix?

Some recipients of my emails have been getting a bunch of code, letters and symbols, inserted into the email preceded by "span.IP". What is causing this and how can I fix it? Also (may be related) when i start up Thunderbird, I get the following error message:
Secure connection failed
live.mozillamessaging.com uses an invalid security certificate. The certificate is not trusted because no issuer chain was provided. (Error code: sec_error_unknown_issuer)
This could be a problem with the server's configuration, or it could be someone trying to impersonate the server.
If you have connected to this server successfully in the past, the error may be temporary, and you can try again later.
Or you can add an exception…

Browser Safeguard apparently attempts to intercept your secure connection to the server, so just uninstall it. Reboot your computer, and run a malware check.
It's also possible that it issued certificates for secure sites you visit. Those self signed certs could then be used by IE, so you should get rid of them as well.
In IE under Internet Options - Content tab click on Certificates. It opens to the Personal tab. Look for certificates issued by DO_NOT_TRUST_FiddlerRoot. Those are the ones created by Browser Safeguard.
Both, Thunderbird and Firefox use their own certificate store independent from the Windows certificate store. So they should not be affected by those certs.
For the future watch out for additional software being sneaked in when installing a program.

When I insert a screen shot or image into the body of an email (not an attachment), why does it not show up after being sent? It works fine in other browsers.

Similar Messages

Maybe you are looking for