When I instaled new verson my Iphone4 stoped, in the sight shows the Itunes symbol. I tried to connect to Itunes, but can't repair. MISTAKE 3004. What can I do? I'm brasilian and don't speak english very well... Please, help me. Use my e-mail. Junara

When I instaled new verson my Iphone4 stoped, in the sight shows the Itunes symbol. I tried to connect to Itunes, but can't repair. MISTAKE 3004. What can I do? I'm brasilian and don't speak english very well... Please, help me. Use my e-mail. Junara
<Personal Information Edited by Host>

Hello Junara1969,
Thank you for contacting Apple Support Communirties. I have a couple of articles for you to take a look at to troubleshoot your issue.
I would start with basic troubleshooting
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If you are still having the same issue, then there are further steps for this specific error code here:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
Jeff D.

Similar Messages

  • Hey ammm who can help me y need help but i don´t speak english very well, hey ammm who can help me y need help but i don´t speak english very well

    hey ammm who can help me y need help but i don´t speak english very well, hey ammm who can help me y need help but i don´t speak english very well

    Post your question in your native language. There are often Spanish speakers who participate in these forums.
    Regards.

  • I bought a new mac and i migrate with time machine...but the backup was a little bit old and weren't save the latest modify i made in my website.. is it possible take the uploded site in iweb? sorry but i don't speak english very well.

    I bought a new mac and i migrate with time machine...but the backup was a little bit old and weren't save the latest modify i made in my website.. is it possible take the uploded site in iweb? sorry but i don't speak english very well

    But what can I cut and paste? the html code or image and text directly?
    depend on which template you used.
    if you use iweb photos page template then you need to search for my photos page solutions in this forum.
    @ot: cut and paste from the online version
    @rw: You can drag an image from the website to the Desktop
    have your try your methods in iweb photos page?

  • Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well,

    Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well, but what can I do for QuickTime opens on .avi and doesn't convert to .mov?

    HI GalaxieMusique,
    I'm french too, but I'm going to write this post in english so that everyone may understand it
    I have the same problem in Mavericks, but I'd say, more important, with QuickLook.
    Indeed Quicklook can't read avi movies anymore. Actually it always been the case, but with Perian we were able to fix it. The problem is that Perian is no longer available for Mac OS 10.9....
    I'd assume that our only hope is Apple themselves... It would be nice from Apple to creat an add-on for quicklook to be able to preview the avi movies.
    In regards with quicktime, you can download QuickTime 7 here:
    http://www.01net.com/telecharger/windows/Multimedia/lecteurs_video_dvd/fiches/10 0.html
    and ask all the .avi movies to be played by QuickTime 7 and not QuickTime X (included into Mac OS).
    Sorry for the english, we french people can make mistakes sometimes
    If anyone has a solution for QuickLook, please do not hesitate. This topic is becoming a real mess....

  • First of all I dont speak english very well but ok. I lost my cell phone and I want track it, how can I do it?

    First of all I dont speak english very well but ok. I lost my cell phone and I want track it, how can I do it? My cell were turned pdf

    If you had "Find My iPhone" enabled then you may be able to locate it. If not, you cannot locate it. If it was enabled then you can try locating it via http://icloud.com on a computer or the App "Find My iPhone" on another iDevice. Note: this will only work if your device is connected to a network and the device hasn't already been restored as new and/or "Find My iPhone" has not been disabled on it.
    If you think that your device was stolen rather than lost then you should report it to the police. In either case you should contact your carrier, change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

  • TS2771 Suddenly the sound of my iPods keyboard suddenly becomes very faint bit when I have my headset on its functioning very well please help thanks

    Suddenly the sound of my iPods keyboard suddenly becomes very faint bit when I have my headset on its functioning very well please help thanks

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    Hello kidmango,
    I am going to have to agree with planb77. Look into other drivers in your computer causing the issue, not just the nano's drivers.
    It is possible that security software is the culprit. Use this:
    iTunes: Troubleshooting security software issues
    You may have to restore your computer to a previous point. From before the issue started. Contact computer manufacture or Windows for steps, or do a search with a search engine.
    I would test the ipod on a known good computer to see if its the ipod is the issue. My gut says no. You can set a reservation at an Apple Retail Store. Apple.com/retail .You can also test a known good ipod on your computer.
    Hope this helps.
    ~Julian

  • Everytime i click my mouse anywhere on my desktop, it's as if i pressed right-click.  i've checked my mouse preferences, and everything is normal.  very frustrated, please help!

    please help!

    Check system preferences > mouse.  If you're on Lion, the secondary click can be set to the left or right click. 
    Also this also happens when the CNTL key is held down (or stuck).
    Regards,
    Captfred

  • Mac shuts down after start up and before it was acting very slow, please help!!!

    Recently my imac has been running unusually slow when I open/close apps or when loading things, it sometimes would freeze or take about 20 secs to load etc.
    So in an attempt to fix it it cleared all unnecessary files from my computer but nothing too technical.
    Then yesterday i was told by my brother to go onto disk utilities and verify/repair the disk. Both times it failed and further repeats failed. After the repair disk failed a message along the lines of "back up data you want then restore the disk" something like that.
    Now today when I started up my computer in the morning it was fine, then a couple of hours ago I restarted it, and now it won't turn on properly. It goes to the apple icon with a spinning loading wheel and a empty bar underneath and after about 20 secs it shuts down. So then I did the thing where you hold down cmd and r to open osx utilities and went to disk utilities again to try and repair/verify the disk and again the same failure and messages came up suggesting to restore my disk.
    Being 16 I only understand so much and understand that I will probably have to put in the installation disk or something and "re do my computer from scratch." But I do have things I want to back up before I do so but due to the load up problem I have no way of backing up photos, music and files and i don't know if the time machine has backed up the data for me (I don't really understand the time machine). I'm currently using my phone to post this, any help would be greatly appreciated because I don't really know what else to do now. My imac is 21.5 inch that I bought around 2years ago late december time. Thank you for your time

    Sounds like a classic HD failure. Take the machine to your local Apple Store or AASP, if it is still covered by AppleCare they will handle it at no charge. If you have been backing up then once the machine comes back restore from backup. I get you are only 16, so I'd explain to  your parents the computer needs to be taken in for service, if they bought it for you they would know if it is covered by AppleCare or not, assuming they originally bought the computer for you.
    Good luck.

  • I'm new and don't get it yet. Please help with adding video to timeline.

    Please give me direction with this.
    I  created 5 swfs (simple, short animations) The swfs are named "movie1," "movie2," and so on. I want to import all 5 movie clips and thread them  together so that they play one after the other inside the timeline of a new Flash  Document. I am hoping to have "movie 1" play, stop,  have "movie 2" play, stop and so on until the 5th "movie plays then  stops (no looping necessary). It will be played on a Mac laptop and not online.
    I've been fiddling with timeline actions for 2  days and can't figure how to lead one movie to the other. I've been using  Action Script 2 so far.
    What I've done is create 5 layers (1 for each clip)
    "movie1" is on layer 1, frame 1
    "movie2" is on layer 2, frame 2
    "movie3" is on layer 3, frame 3
    "movie4" is on layer 4, frame 4
    "movie5" is on layer 5, frame 5
    Is this workable?
    Thanksk all.
    Al Naclerio

    if you have swfs (and not movieclips), that probably won't work:   no actionscript in those swfs will work.  so, if you have any actionscript those swfs you'll need to "load" the swfs.

  • I just did an "erase and install" on my computer, and when i drug everything back to my computer from the external hard drive. however, now i cant open microsoft word. i have an exam on tuesday that I need it for and i dont want to pay for it, HELP!

    i cant seem to get it to open. it just says "microsoft word cannot open because of a problem"
    ive tried dragging it from the harddrive to my applications folder, but its not working.
    any suggestions?

    If you purchased your version of Office online, you can redownload it from Microsoft using your product key (I don't know why the link says "office2010"... but the link is for Office for Mac 2011):
    https://www2.downloadoffice2010.microsoft.com/macdl/registerkey.aspx?ref=macdl&c ulture=en-US
    They used to have a free 30 trial, but I don't seem to see that anywhere.

  • HT5624 trying to reset my password but can not remember my security questions and the email that it says to send to is my old email, i have changed it on id page

    trying to reset apassword because for some reason now i can not sign in. when it asks for security question i cant remember them but the email it wants to send answers to i no longer have. i chnged it on id page

    Hi there,
    You may find the article below helpful.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    -Griff W.

  • I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Hello, I'm in trouble in iTunes update 10.3.1 on my ipad. I was wondering if someone could help me? ( I don't know talk in english very well. I am brasilian).

    hello, I'm in trouble in iTunes update 10.3.1 on my ipad. I was wondering if someone could help me? ( I don't know talk in english very well. I am brasilian).

    Don't worry about your English.  It's good.  Please tell us more about your problem.

  • HELP ! I'm french i don't speak english somebody speak french please?

    Hi, i'm french i don't speak english and i have a problem to remove a software to my Imac 24".
    Somebody speak french please? my mail : ********@**.fr
    thank you very much
    <Edited by Moderator: Email Address-See Terms of Use>

    Bonjour macslim,
    Je ne parle pas français, mais si vous êtes pas mieux aider ici, je vais essayer.
    Quels sont les logiciels que vous voulez supprimer de votre iMac.
    Si il s'agit d'une application, s’il vous plaît donnez le nom et le numéro de version.
    Comme alternative, vous pouvez poster votre question sur forum.macbidouille.com où de nombreux utilisateurs francophones pourront vous aider mieux que moi.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

Maybe you are looking for

  • Is it archive problem?

    Hi We have created Miro invoice in the year 2005, and it got cleared in the same year. Now in database, we have accounting documents which are only from 2006 2005 Documents are not available in BSEG table since those are archive And the problem is, i

  • BlackBerry/iPad2/Exchange 2007/Outlook - Read Messages

    We have a user who recently acquired an iPad and he is syncing it with our Exchange 2007 via EAS. Prior to this, he had only a BlackBerry syncing with BES to our exchange server. He has noticed in very close proximity to syncing his iPad with our mai

  • Preservation of connections prior to upgrade from v9.3.x to v11.1.2

    Hello again SV Gurus out there!! I am contemplating upgrading the Smart View add-in on my PC from v9.3.1.6 to v11.1.2 and since I have quite a few connections already set up against our Prod and Non Prod environments, I would like to know whether it

  • Is it Possible to define Levels within Levels in a Dimension

    Hi is it possible to define Levels within Levels in Dimension??

  • Great idea for the web-designers

    Hi all! After almost two weeks of struggle trying to fix our team workflow (after the last Photosop update) I've just found out a great solution which may solve all of our problems related with total Adobe ignorance of their customers needs. The app