When i install drivers for my ct4

i cant connect to internet! why is that happening? do i need some other drivers too?

Thanks for clarifying Jim,
You may download the Windows XP driver from the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-124140-4&cc=us&dlc=en&lc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

I can`t install drivers for Promise IDE on WINXP.

Hi, guys. I have a problem. I can`t install drivers for Promise IDE on WINXP. I `ve got an error "This device cannot start. (Code 10)". In Norton Ghost (DOS) drive on Promise work fine. I can`t install WINXP + SP1 on HDD on Promise controller. After pressing F6 and installing driver i `ve got an error Can`t find drive. BIOS 193 beta. Devices: IBM 120Gb 180GXP on primary master, Seagate 120 SATA 26AS on Third master. CD-ROM and DVD-ROM on secondary channel. Drivers 1.00.1.37 from ASUS and 1.00.1.29 from MSI. No result.
And another one. Why very poor perfomance when copying large files (700Mb). When starting copying speed is 25-27Mb/sec, when finishing 5-8Mb/sec. All drives under NTFS.
PS. Sorry for my bad english.

Quote
Originally posted by Athlon1000
But if you have selected Promise as: SATA in BIOS shouldn't you then use the ulsata.sys driver instead and if you choose Promise as: RAID in BIOS then you should use the f2tx*.sys, or am I way wrong here ?
That's correct
So if I do not misunderstand you, Windows hangs when accessing the drive?
Is it only with this drive, then maybe it's an incompatibility between the controller and the ata electronics of the drive.
Or maybe it's completely broken.. have you tried it on the ICH5 IDE controller?
If it works there you should use this configuration.
I've read about problem with some drives ... take a look into the threads on the top of this board (FAQ etc.).
What I found out yesterday: You can use the Promise in RAID mode and define a RAID0 array with only one single drive. So you could use the Fasttrak driver from MSI, which is up to date.
I haven't tried this solution (one disk in a RAID0 stripe configuration), but I think it should work...
Maybe you give it a try
PS.: Before you switch to RAID mode, you have to change the Promise Driver... but be careful: windows won't boot with the wrong driver - your last chance would be "last known good" then...

I´d like to export my iphotos macbook pro.everything worked right when I installed impression for iphoto but when I installed impression 2 for iphoto and I restared my computer the export option in iphoto doesn´t work.Can somebody please help me ?

I´d like to export my iphotos "macbook pro". Everything worked fine when I installed impression for iphoto but when I installed impression 2 now I can´t export my photos. I´ve restarted the computer but still it doesn´t work.
Please can sombody help me with that?
Thank you

Are you running Snow Leopard or Lion? Your info says Snow Leopard. If it's lion then:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Then you can locate the folders mentioned.

How to manually install drivers for windows 7 64 bit?

How do I install drivers for iphone 5s? My desktop windows 7 64 bit is not recognizing the iphone

Download and install the 64 bit version of iTunes to get all drivers for iOS devices.
http://www.apple.com/itunes/download/

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

Go back to Boot Camp: on the 2nd page you get this:
Download the support software and as Windows is already installed uncheck the 2nd box.

I have an HP mini 210-214 dxpc want to install drivers for hp officejet G85 printer

Help I'm at wits end I need driver (s) for hp officejet G85 all in one printer installed in my hp mini 210-214 dxpc with an upgraded windows 7 ultimate os in it.i've done everything i can find on hp website, the wizard finds the printer but no driver, windows can't find the driver, hp says its in my os already as a __os driver i cant find it or get this going been doing this for10 hrs now please somebody make it simple for me to install the necessary driver or whatever it is i need to do to get this printer operating from my laptop. oh this is through a usb connection if you need to know that.
thank you for helping

Hi @GoddessDiamond,
Welcome to the HP Forums!
I understand that you are trying to install drivers for your HP Officejet G85 printer on Windows 7. I am happy to help!
Please take a look through this installation guide, Installing the Printer Driver Using the Windows 7 Built-in Solution for a USB Cable Connection.
Otherwise, if that does not work, you can try to download the Windows XP driver, HP Officejet Basic Software and Driver, and run it using compatibility mode. Make older programs run in this version of Windows.
If neither of those two options work, then the last step is to try an alternative driver, please see this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R.
Hope this information resolves your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Trying to install drivers for my scanner, not working

I'm trying to install drivers for a canon scanner, it's not working. I ownloaded them from the canon website and they are for Mac OS 9, would they still work? or do i really have to get a new scanner?

Hi Anna
Which model of scanner is it? Have you checked thoroughly to see whether OS X drivers exist?
Matthew Whiting

Can anyone tell why I cannot install drivers for my IPOD Clasic

I have iTunes installed and I cannot install drivers for my IPOD Classic while using windows vista 64 bit?

Download the apps on your syncing computer and then sync to the iPod. Note that you can only sync apps for the one syncing computer you use with the iPod. You can manage music and videos among different computer.

I cann't install drivers for wifi and usb2 on inspiron 3721.

Hi.
I cann't install drivers for wifi and usb2 on inspiron 3721.
My OS is windows 8.1
ID for usb2:
USB\VID_0BDA&PID_0129&REV_3960
USB\VID_0BDA&PID_0129
ID for wifi:
PCI\VEN_168C&DEV_0036&SUBSYS_020C1028&REV_01
PCI\VEN_168C&DEV_0036&SUBSYS_020C1028
PCI\VEN_168C&DEV_0036&CC_028000
PCI\VEN_168C&DEV_0036&CC_0280
Please, help me!

Install the Intel Chipset Drivers if you haven't done so already:
https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
http://downloads.dell.com/FOLDER01739853M/1/Chipset_Driver_498GM_WN_9.5.14.1724_A01.EXE
http://downloads.dell.com/FOLDER01744340M/2/AHCI_Intel_W8.14_X00_A01_Setup-9V0D2_ZPE.exe
That's the Realtek Card Reader:
http://downloads.dell.com/FOLDER01692810M/1/Chipset_Driver_7HRCT_WN_6.2.9200.39050_A00.EXE
That's an Atheros Dell Wireless 1705 Wireless Card use this driver:
http://downloads.dell.com/FOLDER02227589M/1/3340_Network_Driver_XVXC6_WN_10.0.0.320_A00.EXE
Also install...
Aeroplane Switch Driver:
http://downloads.dell.com/FOLDER01646912M/260/AirplaneMode_W81_x64_1.4.1_ZPE.exe
Touchpad:
http://downloads.dell.com/FOLDER01918135M/1/Input_Driver_JCY9W_WN_18.0.1_A08.EXE
Audio:
http://downloads.dell.com/FOLDER01706440M/1/Audio_Driver_8F9KD_WN_6.0.1.7023_A00.EXE
Video:
http://downloads.dell.com/FOLDER01815953M/1/Video_Driver_W1PPW_WN_10.18.10.3316_A02.EXE
http://downloads.dell.com/FOLDER01726226M/1/Video_Driver_3JMFD_WN_13.151.0.0_A00.EXE
Dell Quickset:
http://downloads.dell.com/FOLDER01861763M/1/Application_7JTWX_WN_10.16.004_A01.EXE
You may also update the BIOS to A12:
http://downloads.dell.com/FOLDER01818934M/1/3721A12.exe

How install drivers for vista 32bits on iMac ?

i need to install drivers for vista 32 pro bits on my bootcamp partition on my imac 27".
bootcamp assistant fifd only windows seven drivers
could you help me .?
regards

There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

How to install drivers for ati radeon 3200?and how to config xorg.co ?

how to install drivers for ati radeon 3200?and how to config xorg.conf?

mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier

X-Fi Extreme Music || when installing drivers for windows vista 32 bits, error mess

I get an error message when I install windows vista 32bits drivers for my X-Fi Extreme Music... it says, error while installing, can't find a compatible product on your system, verify if it has been corectly installed ... BUT INSTALLING I JUST WHAT I WANNA DO ! WTF?
all other software for hardware management can see that my sound card is connected to my mother board, so i don't understand why the driver installer can't see it too and install the drivers ...
Could someone give me a tip to help me to install my drivers please?
i got windows vista 32bits build 6000 , X-Fi Extreme Music, 2048 RAM, Pentium4 3.6ghz 250 go hdd space ...
I'm waiting for some cool answers, thanks ! ...

You are wrong. The 2.3 are for extreme music, you are thinking about extreme audio. Creative have really made a blunder with these names, not strange many are having problems. Propably trying to install extreme audio drivers on extreme music, and the other way around!?
Check that you have the right drivers, if you do. Try the trick where you unpack the driver exe file, so you get all the files from the installer on to a folder of youre choosing. Then use the "Creative Update Utility" popup to install/force the drivers to install. If you dont know what im talking about, search the forums, its been explained many times here.

Driver Version Not Found" Error when installing drivers for X-fi Xtreme audio

I recently bought the game Bioshock off steam and have been unable to play as it crashes as soon as I try to launch it. After doing some digging around I found out it was a sound problem. When I was looking at the drivers for my sound card (Sound Blaster X-Fi Xtreme Audio) I noticed that the driver called:?XFXA_PCDRV_LB__04_0079.exe has a fix for Bioshock. However when I install the driver I get the error "Driver version not found". I am positi've it is the correct driver for my sound card. I am on Windows 7 64bit.

Hey!
I have Vista Ultimate x64 and I ran windows update couple days ago. There was a new update for my xtreme audio pci-e. I installed it and now my driver version in creative software update is .3.2. Before i updated i ran creative's own software update. It didn't find any new drivers. I was WTF. I think that new driver fixed my volume problem. I had problem's when there was a deep bass in a song. The sound card lowered volume levels then somehow. Now that happens no more. In vista's device control it shows the driver version as 6.0.0.203. Driver date is 7 october 2008.

Error message when installing drivers for sb0

I have the soundblaster li've sb0060. If I try to install drivers, i get the message <EM>this application or driver can not be installed on a system with an sb </EM>li've<EM> card that supports 5. speaker output. Any one have any ideas? am i trying to install wrong drivers?</EM>

Which drivers are you trying to install, and which OS do you have? Try the file Li'veDrvUni-Pack(ENG).exe under Support > Download Drivers (fill it in the space under Search By Filename).
Cat

When i install drivers for my ct4

Similar Messages

Maybe you are looking for