When I install language pack on windows 7 ultimate wil also office 2010 which is installed change to the language I installed ?

hi,
when I install language pack on windows 7 ultimate wil also microsoft office 2010 change to the language I installed or office has its own language pack.
thanks
johan
h.david

Hi,
Office 2010 has ite own langage pack.
You can check this post
http://www.howtogeek.com/howto/24433/how-to-add-other-languages-to-office-2010/
/ Yannick Plavonil
blog: Deploiement Windows
twitter: @yplavonil
facebook:
www.facebook.com/deploiementwindows

Similar Messages

Excel VBA - ActiveX Control - MonthView not available under ActiveX Toolbox for Windows 8 64bit MS Office 2010

Hello,
I have Windows 8, 64bit and Office 2010
I am trying to get the 'datepicker' (MonthView) ActiveX control toolbox in Excel 2010 as part of a Excel UserForm I have created. I have spent all day trying to find a solution for my problem.
I opened up the 'more.. ' but the MonthView/datepicker/calendar control is not listed.
I referred to some articles and confirmed that I do indeed have the mscomct2.ocx file in the C:\Windows\syswow64 folder.
I followed the instructions as above, opening up the Administrator Command Prompt and changed the directory to C:\Windows\syswow64 and typed in RegSvr32.
I received a popup screen confirming my registration was successful
Excel was closed. So I opened Excel and checked out the ActiveX Tool box and clicked on the 'More Controls', but there was no listing for the Microsoft MonthView control, (nor datepicker/calendar)
I then downloaded the latest Windows Common Controls 2 6.0 from the following site
http://support.microsoft.com/kb/297381
Copied the original file (2008) and saved it elsewhere on the computer for safekeeping.
Extracted the new mscomct2.ocx.
Under the C:\Windows\syswow64 I changed the original file properties to allow me to overwrite it with the new file. This worked … old file replaced.
I then registered the new file via the Administrator Command Prompt (as above) and was notified that it was successful. I rebooted pc and went back into Excel to find the MonthView in the
ActiveX toolbox, More Controls… and it still wasn’t there …
I would be very grateful if someone could advise how I can get this control and allow me to use it.
If I have left out any information that you need to resolve this issue, please advise.
Cheers,
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Hi George,
Thank you for checking this out ... :)
I am using Office 2010 64 bit ...
I found the
mscomct2.ocx file originally within the C:\Windows\syswow64 directory (this was an original file .... which I expect was installed via Microsoft at the time of the Office installation.
As I mentioned above, I followed
the instructions (same as the ones you suggested), but still no go, even though it stated that the registration was successful ! :(
Why weren't these features included in the 64 bit ? ... yes, I read the article ... but ... so MS doesn't think that people/developers would be needing this in due course? I installed the 64bit version because I'm running the Win8 64bit version ...and
I deal with a lot of large spreadsheets and can't afford to sleep whilst they decide to load.
If MS included all the other ActiveX controls and some obscure ones, surely some bright spark could have thought that something as useful as MonthView should be included as 'basic' necessity when dealing with forms and sheets?
Perhaps you could pass the suggestion up the line .... there are a lot of other people out there having the same problem ... I found heaps when I was looking for a solution.
Sorry, I'm not having a go at you, but just incredibly frustrated .... the amount of lost productivity directly cause by trying to find a solution that doesn't exist ... it's been at least a good solid 24 hours.
But thank you for taking the time to review my post and your suggestion. It's unfortunate that because you are part of the organisation ... you tend to cop some slack from frustrated people like myself.
In relation to the pictures/screen dumps, 2 of them made it (I can see them in my post) ... one I deliberately left out because there was nothing on there that showed anything other than the rest of the 'More Controls' - nothing to do with the MonthView.
Please feel free to escalate this to the powers that be ... and hopefully enough people will join the voice so a change can be made (I can dream ... can't I?)
I've taken a screen dump of the Forms/ActiveX toolbox.
I don't know what the next step is ... I guess you'd be able to advise.
Cheers,
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Help with OBDC connection in Windows 7 64bit with Office 2010 32 bit.

Hi,
Many moons ago I wrote an application in Java that configured XP machines after they were sysprep’d and deployed. I am currently migrating all our workstations to Windows 7, and was checking my application still worked and queries the correct registry keys etc.
As it turns out however I don't even get going as I believe the application is unable to connect to the ODBC Microsoft Access Driver in Windows 7 64bit with Office 2010 32 bit. Below is the code I have always used and no longer works. I am hopeful that someone can tell me how to modify the command to work on Windows 7 64bit. If I browse to C:\Windows\SysWow64\OBDCad32.exe all the drivers I need are there I think, but if I open OBDC from Administrative Tools the Drivers tab is empty but for SQL. Anyway I will shut up and below is the code I used to use:
     public IOMakeConnection()
     dm = new DisplayMessage();
     ioed = new IOEncryptDecrypt();
     url = "jdbc:odbc:DRIVER=Microsoft Access Driver (*.mdb);DBQ=" + getPath() + "Config.mdb;Uid=admin;Pwd=password";
          try
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          connection = DriverManager.getConnection( url );
          catch( Exception e )
          system.out.println( "" + e );
          errorObtainingPath();
The exception is always thrown as my little app that requests the database path always loads.
Thanks in advance,
Cheers Kris

Hello again,
Sorry for the delayed response, I have been out of the office for a few days.
I have solved the issue, and as stated above the issue was the way I was launching the application. Below is a summary of the issue and the resolution.
My problem was that in Windows 64bit if you click on ODBC in Administrative Tools the Drivers Tab only includes an SQL Driver, and my code reference a Microsoft Access Driver to query the database. That said however if you browse to C:\Windows\SysWow64 and open obdcab32.exe it opens the 32bit version of ODBC, and the Microsoft Access Driver (*.mdb) is listed.
Basically what I need to do therefore is get my code to access the “32bit” version of ODBC in a Windows 7 64bit environment, so my application was able to read the necessary information from the Access Database associated with it.
I understand that this is not a coding issue directly, but assuming people still use Java to open an Access Database on a Windows 7 64bit OS, this may be of help.
So previously I ran the following command, from the “Target” box in a shortcut to execute the java code:
cmd.exe /C SET CLASSPATH=C:\SCAConfigurationUtility && CD\SCAConfigurationUtility && JAVAW SCAConfigurationUtility
Windows 7 64bit, defaults to the 64bit version of Java, and just seems to plain fail if you only have the 32bit version installed. To overcome this I forced the java executable that I was using to be the 32bit version, and used the system switches available in Java 7 (-cp does not appear to be available in Java 6)
So my Shortcut now has this in the “Target” box:
java.exe -d32 -cp C:\SCAConfigurationUtility SCAConfigurationUtility
And this in the “Start in” box:
"C:\Program Files (x86)\Java\jre7\bin"
Or by using the target below the same shortcut works in XP
"C:\Program Files\Java\jre7\bin"
Thanks for all the help,
Regards Kris.

Install Chinese Language Pack on windows 8.1

When I tried to install chinese language pack on windows 8.1, Why cannot see
download and install language pack
on windows display language tab? Any method to install chinese language pack? Thank You.

Hi Mikesk88,
In case there might be some system files missing, type the following command in CMD, with admin rights:
Dism /online /cleanup-image /restorehealth
Reference:
Fixing component
store corruption in Windows 8 and Windows Server 2012
Then try to download the language pack again.
Best regards
Michael Shao
TechNet Community Support

Office 365 with Office 2013 MSI Language Pack on Windows 7 machine.

Hello All,
I have Office 2013 MSI Language Pack installed on Windows 7 machine. After deploying Office 365 using ODT, Lync is crashing.
Is Office 2013 MSI Language Pack compatible with Office 365?
Thanks in Advance !!

Hi,
Have you checked the log file? Does it record the error details there?
So you only have the language pack on your computer, not the entire Office 2013 instance? Office 2013 MSI Language Pack doesn't work with Office 365. Try to remove the language pack then try again.
Also, to plan a multi-language deployment of Click-to-Run-based Office installations, please refer to this article:
http://technet.microsoft.com/en-us/library/dn186220(v=office.15).aspx
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I cannot use my Japanese language pack in windows 8.1

After upgrading to 8.1, my system restored back to english and now unable to set Japanese as windows display language. What should I do? Thanks

After upgrading to 8.1, my system restored back to english and now unable to set Japanese as windows display language. What should I do? Thanks
I had a similar problem:
Original Windows 8 was in Portuguese, but I'd installed a English (US) Language Pack and used Windows most of time with English set as display language.
After updating to 8.1, I couldn't download the English Language Pack.
Windows displayed a message to connect to internet in order to downlad the language pack, eventhough the computer was already connected.
The solution that worked for me was going to advanced language settings (Run dialog -> "::{26EE0668-A00A-44D7-9371-BEB064C98683}\0\::{BF782CC9-5A52-4A17-806C-2A894FFEEAC5}\CommonLangSettings") and choose "Use language list (recommended)" in "Override
for Windows display language"
After that, the language pack could be downloaded normally from English's Language Options
Best regards
Check out Windows 8 booting within just 4 seconds with an ordinary HDD.... http://youtu.be/4Z4-XK5iavg

Error installing BI Publisher Desktop in Windows 7 64bits with Office 2010

Hello
I'm having a problem when trying to install the latest version of BI Publisher Desktop on my computer (Windows 7-64bits with Office 2010).
Almost at the end of the installation it appears a message box saying "Template Builder installer failed: Cannot run installer while Mocrosoft Word is running". Now, i made sure all Office apps are closed, as well as IE windows. What i've noticed is that right before this error appears, a process for WINWORD.exe is open - by the installer.
How can i fix this?
Many thanks for your replies

I've tried runnig the installer with Windows XP SP3 compatibility and it worked.

I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it loses my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

I wanted to install windows for Mac and I had vista so I put I the disk and installed followed the steps it then it closed my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

The two other posts are correct... so I'll just clarify. What's happening right now is your system is trying to boot into Windows in order to finish the installation. What you want to do is make it boot into OS X. As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on. You will eventually be presented with an option to select which partition you would like to boot from. Choose OS X. After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X. What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition.

When i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?

when i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?

Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we did

having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

Hey robr72339266,
With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
But, you cannot use Acrobat on both the machines simultaneously.
You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
Please Contact | Adobe to seek help on the same.
Regards,
Anubha

I just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?

i just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?

thanks,
in yosemite i installed englisg as a second preferred language, this worked!
Op 2 nov. 2014, om 22:55 heeft Barbara B. <[email protected]> het volgende geschreven:
i just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?
created by Barbara B. <https://forums.adobe.com/people/Barbara+B.> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6892596#6892596>
Is this the mac app store version? A number of people are having this problem. This is what adobe recommended in the past for fixing the problem, but as far as I know it doesn't work in Yosemite:
Mac App Store version is German | Photoshop Elements <http://helpx.adobe.com/photoshop-elements/kb/mac-app-store-version-german.html>
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6892596#6892596
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email <mailto:[email protected]ware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 47>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution.

It means the software is PowerPC code, which is no longer supported in Lion. Your choices are to go back to Snow Leopard, run Snow Leopard Server in a virtual machine within Lion, see if the vendor has an updated version of National Geographic that will run on an Intel Mac, or run the software on an older Mac separately.

If multiple users will be using the same iPad, how can I lock it so the settings cannot be changed, specifically the languages(students are changing the languages)?

If multiple users will be using the same iPad, how can I lock it so the settings cannot be changed, specifically the languages(students are changing the languages)?

Even with Apple Configurator most of the settings cannot be locked, and that includes the language settings. Most schools and organizations seem to just accept that they'll have to reconfigure the iPads on a regular basis.
Regards.

Cannot install chinese language pack on windows 8.1

Hi , I just bought HP Pavilion 500-338d installed with Windows 8.1 for x64-based Systems. I don't know why cannot install chinese language pack. By the way, I had checked with Microsoft team and then they said to refer to manufacturer side. Attached picture is my problem. Please help me. Thank You.

It depends on the version of Windows you have.
If you have Windows Single Language version (see screenshot below), you can change your keyboard layout language, but you can't change your Windows display language.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Language Packs X86 Windows 8.1 update

Hello,
in the past, i could shoud before installing an OS with language is installed.
At the moment this isn`t working for me anymore for X86-images --> x64 images are working ok.
The langue-packs i have installed in MDT are the following :
Maybe i need the 9600-image of the language pack? But i can not find that one on the microsoft download-page.
Anybody with a solution for this?
Thx

Have you checked the volume license download center?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

When I install language pack on windows 7 ultimate wil also office 2010 which is installed change to the language I installed ?

Similar Messages

Maybe you are looking for