When I install the 10.6.7 update to MacOSX, iTunes locks up

As the title states, when I perform the update to Mac OSX 10.6.7, every time I start iTunes, my entire desktop freezes and the only way to use it is to reboot by holding the power button in.  The system is fine when I reboot, and don't start iTunes.  The minute I start iTunes it totally locks up again.  The only solution is the problem was to re-install 10.6.6 from the DVDs that came with my new 2011 iMac 27".
I would like to update to Lion, but I don't want to pay $29.99 if this is going to freeze up my system.  Has anyone else experienced this??

Launch the Console utility and look for messages that might explain your problem.

Similar Messages

  • So when I installed the most recent updates for microsoft office 2011 for mac, my ical info disappeared.  Still have the info on my Office calendar but it's no longer on ical.  It's also been removed from my phone.  How can I get outlook to sync with ical

    When I installed the recent updates for Microsoft Office 2011 for Mac, my iCal calendar was wiped out, as was the calendar on my iPhone.  I'd rather use iCal than Office and was attempting to phase Office out altogether.  Now, all of my information is on the Office calendar but not iCal.  The iCloud version of my iCal calendar is not up to date.  In any event, I couldn't figure out how to send that info to the iCal on my mac or my phone.  How can I sync my Office calendar info to iCal?  If that's not possible, how can I get my Office calendar to sync with my iPhone?  All of my sync services are set up in iTunes and on my phone.  This happened to me once before and I spent hours on the phone with Apple and on the web trying to work it out.  I NEED MY CALENDAR!!!! PLEASE HELP!!!!!

    As that's not an Apple product, you may get more help by using Microsoft's Office for Mac forums:
    Office for Mac forums
    The other concern I have is that Office 2011 requires an Intel-based Mac and you posted in the older iMac (pre-Intel or "PPC") forums. If you have an Intel-based iMac (Apple menu > About this Mac..." will say "Intel" if you do) then I think you'll get faster and more accurate ansers to other questiosn in the Apple forums for newer iMacs here:
    iMac (Intel)

  • Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Hi,
    I have the check box on a second Partition  but not on the Time Machine one
    I forget what I did now to get this called "Recovery HD"
    For the rest try https://discussions.apple.com/docs/DOC-4055  User Tip that links to Pondini's work on Time Machine.
    10:17 pm      Friday; May 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any

    I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any tips on how to solve this problem?

    If doesn't work try use the instructions below BUT in BOTH folders, first in SourceList and after in the Media.
    Start>Run put regedit and press Ok.
    1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
    2. Right click in Media folder, select Permissions from the menu.
    3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
    4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
    5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
    6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
    7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"

  • Central instance can not startup when i install the SAP /DB2 9 env

    Hi,
    could  anybody help me?   I just installed the SAP /db2 V9.1 on HACMP cluster envrioment . By now , the SCS, ASCS, DB instance installation have been  OK, Unfortunately , an
    error occurs when I installed the CI.
    the error message is that "ABAP Database db must be started on remote server "  i check the trans.log , the error message is "DbSlConnect to 'AE1' as 'sapae1' failed"  the detail informatioin ,please check the the following trans.log.  but i can startup and activate the database, i can connect to db with sapae1 and sapae1 user with password. 
    first i install the DB2 software and db2 instance with the virtual hostname dbae1. i found the hostname in the db2cfg.log is not virtual hostname but physical name. i don't know what happens.  In order to keep the hostname the same, i installed the CI on sapaix01, the error message is the same as before.  i have upgrade the sap kernel and reinstall the CI again, the error is the same as before too Could you give me some suggestion.
    First  let me describe our cluster enviroment
    For CI, and DI are not a Single point of failure  , so the DI and CI
    are out of cluster.     The cluster enviroment just includes the
    SCSASCS and DB instance. SCSASCS is installed on sapaix02, DB instance is installed on sapaix01
       1. Host name 
    sapaix01  : DB instance and DI  (visual hostname dbae1)
    sapaix02:   SCS,ASCS, CI        (visual hostname scsae1)
      2. file systems  (sapaix01 DB instance )
    Sapaix01
    Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd4         6291456   4792544   24%     2808     1% /
    /dev/hd2        13107200   6175040   53%    73295    10% /usr
    /dev/hd9var     13107200  12816904    3%     1336     1% /var
    /dev/hd3        61603840  35610304   43%     3844     1% /tmp
    /dev/fwdump       786432    785656    1%        4     1%
    /var/adm/ras/platform
    /dev/hd1         1048576   1016152    4%      213     1% /home
    /proc                  -         -    -         -     -  /proc
    /dev/hd10opt     4194304   2512624   41%     6241     3% /opt
    /dev/lvusrsapae1d10   41943040  41935984    1%        4     1%
    /usr/sap/AE1/D10      (Local file system)
    /dev/lvdb2ae1   20971520  20927640    1%       38     1% /db2/AE1
    /dev/lvdb2logs   20971520  18346424   13%       25     1%
    /db2/AE1/log_dir
    /dev/lvdb2archive   41943040  41935984    1%        4     1%
    /db2/AE1/log_archive
    /dev/lvae1sapdata1  104857600  18817168   83%       47     1%
    /db2/AE1/sapdata1
    /dev/lvae1sapdata2  104857600  18817400   83%       48     1%
    /db2/AE1/sapdata2
    /dev/lvae1sapdata3  104857600  18817184   83%       48     1%
    /db2/AE1/sapdata3
    /dev/lvae1sapdata4  104857600  18817168   83%       48     1%
    /db2/AE1/sapdata4
    /dev/lvdb2db2ae1   20971520  19874760    6%     3931     1% /db2/db2ae1
    /dev/lvae1saptemp   20971520  20967584    1%       12     1%
    /db2/AE1/saptemp1
    /dev/lvdb2db2as   10485760  10483504    1%        4     1% /db2/db2as
    /dev/lvae1db2dump   10485760  10470600    1%        8     1%
    /db2/AE1/db2dump
    scsae1:/export/usr/sap/trans   20971520  20967592    1%       16     1%
    /usr/sap/trans
    scsae1:/export/sapmnt/AE1   12582912   9886168   22%     1529     1%
    /sapmnt/AE1
    10.241.13.54:/software2 1755152384 1154051696   35%    62702     1%
    /software2
    For the database version is 9.1 , so I installed the db2 software in
    /db2/db2ae1/v9 , and db2 client software in /opt/IBM/db2/V9.1  (for DI)
    on sapaix01,  db2 client software in /opt/IBM/db2/V9.1  (I installed the
    db software with virtual hostname dbae1 not sapaix01 )
    sapaix02
    Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd4         6291456   4915592   22%     2790     1% /
    /dev/hd2        13107200   6177120   53%    73643    10% /usr
    /dev/hd9var     13107200  12857456    2%     1311     1% /var
    /dev/hd3        21495808  16955192   22%     3283     1% /tmp
    /dev/fwdump       786432    785656    1%        4     1%
    /var/adm/ras/platform
    /dev/hd1         1048576   1046848    1%      105     1% /home
    /proc                  -         -    -         -     -  /proc
    /dev/hd10opt     4194304   2197776   48%     9002     4% /opt
    /dev/lvusrsapae1   20971520  20966872    1%       47     1% /usr/sap/AE1
    /dev/lvae1ascs01   10485760  10243360    3%       86     1%
    /usr/sap/AE1/ASCS01
    /dev/lvae1scs00   20971520  20706584    2%       97     1%
    /usr/sap/AE1/SCS00
    /dev/lvsapmntae1   12582912   9886168   22%     1529     1%
    /export/sapmnt/AE1
    /dev/lvusrsaptrans   20971520  20967592    1%       16     1%
    /export/usr/sap/trans
    scsae1:/export/sapmnt/AE1   12582912   9886168   22%     1529     1%
    /sapmnt/AE1
    scsae1:/export/usr/sap/trans   20971520  20967592    1%       16     1%
    /usr/sap/trans
    10.241.13.54:/software2 1755152384 1154051696   35%    62702     1%
    /software2
    3. hosts file    the file is the same on sapaix01 and sapaix02
    10.241.13.121   dbae1
    10.241.13.125   scsae1
    10.10.11.1      sapaix01_boot1
    10.10.11.2      sapaix02_boot1
    10.10.10.1      sapaix01_boot2
    10.10.10.2      sapaix02_boot2
    10.241.13.71    sapaix01  sapaix01_per
    10.241.13.72     sapaix02 sapaix02_per
    4. the installation guide and error message  please check the attachment
    <<installation_and errorlog.zip>>
    5. I run  db2ilist command  nothing disppear
    I have another questions
    *      whether does DB2 9.1  support installation on the diffirence
    directory (default is /opt/IBM/db2/V9.1 my installation is
    /db2/db2ae1/V9)?
    *      Whether does DB2 9 installation has some relationship with
    hostname ?
    *       Why  db2ilist command result is nothing after I finished the
    DB instance installation ?
    trans.log 
    "trans.log" 143 lines, 14041 characters
    4 ETW000 R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 10.03.2008 - 20:25:40
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Mon Mar 10 20:25:40 2008                              70  0.000070
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    25  0.000095
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                             42  0.000137
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' ...
    4 ETW000                                                                              60  0.000197
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/AE1/SYS/exe/run/dbdb6slib.o), hdl 0
    4 ETW000                                                                            1018  0.001215
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' loaded
    4 ETW000                                                                              39  0.001254
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
    4 ETW000                                                                              43  0.001297
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' is "700.08", patchlevel (0.133)
    4 ETW000                                                                             282  0.001579
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
    4 ETW000                                                                              42  0.001621
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
    4 ETW000                                                                              43  0.001664
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              29  0.001693
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
    0, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              50  0.001743
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         41  0.001784
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              40  0.001824
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
    , con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              47  0.001871
    4 ETW000  [dev trc     ,00000]  DB2 library successfully loaded DB2 library '/db2/db2ae1/sqllib/lib64/libdb2.a(shr_64.o)' suc
    cessfully loaded
    4 ETW000                                                                            9175  0.011046
    4 ETW000  [dev trc     ,00000]  DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
    4 ETW000                                                                              42  0.011088
    4 ETW000  [dev trc     ,00000]  DB6 shared library (dbdb6slib) patchlevels            24  0.011112
    4 ETW000  [dev trc     ,00000]    (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
    4 ETW000                                                                              42  0.011154
    4 ETW000  [dev trc     ,00000]    (0.8) Support of SDBUPDEXCL (note 847616)           25  0.011179
    4 ETW000  [dev trc     ,00000]    (0.9) DB6: use export file for dbdb6slib (note 835135)
    4 ETW000                                                                              40  0.011219
    4 ETW000  [dev trc     ,00000]    (0.9) DB6: Core in getAndBindSQLDA (note 833183)
    4 ETW000                                                                              39  0.011258
    4 ETW000  [dev trc     ,00000]    (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
    4 ETW000                                                                              51  0.011309
    4 ETW000  [dev trc     ,00000]    (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
    4 ETW000                                                                              40  0.011349
    4 ETW000  [dev trc     ,00000]    (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
    4 ETW000                                                                              40  0.011389
    4 ETW000  [dev trc     ,00000]    (0.17) DB6: special characters in sidadm passwd (note 865839)
    4 ETW000                                                                              40  0.011429
    4 ETW000  [dev trc     ,00000]    (0.21) DB6: no SAP_INFO comments (note 873889)
    4 ETW000                                                                              39  0.011468
    4 ETW000  [dev trc     ,00000]    (0.22) DB6: hints: get correlation names from view texts (note 868888)
    4 ETW000                                                                              41  0.011509
    4 ETW000  [dev trc     ,00000]    (0.23) DB6: hints: get correlation names from view texts (note 868888)
    4 ETW000                                                                              41  0.011550
    4 ETW000  [dev trc     ,00000]    (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
    4 ETW000                                                                              40  0.011590
    4 ETW000  [dev trc     ,00000]    (0.27) DB6: activate value compression (note 886231)
    4 ETW000                                                                              40  0.011630
    4 ETW000  [dev trc     ,00000]    (0.28) DB6: optimization guidelines on views part 2 (note 868888)
    4 ETW000                                                                              40  0.011670
    4 ETW000  [dev trc     ,00000]    (0.30) DB6: no SQL trace for SQLCancel (note 892111)
    4 ETW000                                                                              40  0.011710
    4 ETW000  [dev trc     ,00000]    (0.33) DB6: append SAP_TA comment (note 873889)
    4 ETW000                                                                              39  0.011749
    4 ETW000  [dev trc     ,00000]    (0.34) DB6: activate value compression with quoted names (note 886231)
    4 ETW000                                                                              41  0.011790
    4 ETW000  [dev trc     ,00000]    (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
    4 ETW000                                                                              41  0.011831
    4 ETW000  [dev trc     ,00000]    (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
    4 ETW000                                                                              41  0.011872
    4 ETW000  [dev trc     ,00000]    (0.50) DB6: reread passwords for secondary connections (note 931742)
    4 ETW000                                                                              41  0.011913
    4 ETW000  [dev trc     ,00000]    (0.52) DB6: double quote table names in optguidelines (note 868888)
    4 ETW000                                                                              41  0.011954
    4 ETW000  [dev trc     ,00000]    (0.54) DB6: error handling in DBSL CLP (note 940260)
    4 ETW000                                                                              39  0.011993
    4 ETW000  [dev trc     ,00000]    (0.69) DB6: technical support of DB2 CLI driver (note 962892)
    4 ETW000                                                                              40  0.012033
    4 ETW000  [dev trc     ,00000]    (0.73) DB6: log table name on TRUNCATE failure (note 970743)
    4 ETW000                                                                              40  0.012073
    4 ETW000  [dev trc     ,00000]    (0.79) DB6: column type XML in index size calculation (note 982993)
    4 ETW000                                                                              41  0.012114
    4 ETW000  [dev trc     ,00000]    (0.82) DB6: CAST for SSTRING data types (note 989568)
    4 ETW000                                                                              47  0.012161
    4 ETW000  [dev trc     ,00000]    (0.86) DB6: long runtimes for R3szchk (note 1000847)
    4 ETW000                                                                              39  0.012200
    4 ETW000  [dev trc     ,00000]    (0.88) DB6: patch collection Dec 06 (note 1005574)
    4 ETW000                                                                              40  0.012240
    4 ETW000  [dev trc     ,00000]    (0.96) DB6: patch collection Jan 07 (note 1017852)
    4 ETW000                                                                              39  0.012279
    4 ETW000  [dev trc     ,00000]    (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
    4 ETW000                                                                              41  0.012320
    4 ETW000  [dev trc     ,00000]    (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
    4 ETW000                                                                              41  0.012361
    4 ETW000  [dev trc     ,00000]    (0.107) DB6: patch collection Apr 07 (note 1047194)
    4 ETW000                                                                              39  0.012400
    4 ETW000  [dev trc     ,00000]    (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
    4 ETW000                                                                              41  0.012441
    4 ETW000  [dev trc     ,00000]    (0.113) DB6: work process type in application snapshot (note 1059905)
    4 ETW000                                                                              41  0.012482
    4 ETW000  [dev trc     ,00000]    (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
    4 ETW000                                                                              41  0.012523
    4 ETW000  [dev trc     ,00000]    (0.117) DB6: patch for execution of long DDL statements (note 1069658)
    4 ETW000                                                                              41  0.012564
    4 ETW000  [dev trc     ,00000]    (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
    4 ETW000                                                                              41  0.012605
    4 ETW000  [dev trc     ,00000]    (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
    4 ETW000                                                                              40  0.012645
    4 ETW000  [dev trc     ,00000]    (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
    4 ETW000                                                                              40  0.012685
    4 ETW000  [dev trc     ,00000]    (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
    4 ETW000                                                                              41  0.012726
    4 ETW000  [dev trc     ,00000]    (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
    4 ETW000                                                                              42  0.012768
    4 ETW000  [dev trc     ,00000]    (0.128) DB6: db6_free on invalid memory area (note 1092030)
    4 ETW000                                                                              40  0.012808
    4 ETW000  [dev trc     ,00000]    (0.133) DB6: statement cache enhancements (note 1101031)
    4 ETW000                                                                              40  0.012848
    4 ETW000  [dev trc     ,00000]  Supported features:                                   24  0.012872
    4 ETW000  [dev trc     ,00000]  ..retrieving configuration parameters                 24  0.012896
    4 ETW000  [dev trc     ,00000]  ..done                                               126  0.013022
    4 ETW000  [dev trc     ,00000]  Running with UTF-8 Unicode                            25  0.013047
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
    4 ETW000                                                                           67222  0.080269
    4 ETW000  [dev trc     ,00000]  &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N  Security processing failed
    with reason "24" ("USERNAME
    4 ETW000                                                                              48  0.080317
    4 ETW000  [dev trc     ,00000]  &+     AND/OR PASSWORD INVALID").  SQLSTATE=08001
    4 ETW000                                                                              45  0.080362
    4 ETW000  [dev trc     ,00000]  &+
    4 ETW000                                                                              45  0.080407
    4 ETW000  [dev trc     ,00000]  &+
    4 ETW000                                                                              46  0.080453
    4 ETW000  [dev trc     ,00000]  &+
    4 ETW000                                                                              45  0.080498
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1640] (END)          26  0.080524
    4 ETW000  [dbdb6.c     ,00000]  *** ERROR => DbSlConnect to 'AE1' as 'sapae1' failed
    4 ETW000                                                                              71  0.080595
    2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'AE1'"

    Hi,
    have you tried to connect on the command line (instead of using R3trans) ?
    db2 connect to AE1 user sapae1 using .....
    If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
    Then try again to use R3trans to connect.
    Best regards,
      Jens

  • I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    Hi
    Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
    And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
    I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

  • After I installed the windows 8.1 update, podcasts and music won't play

    After I installed the windows 8.1  update, itunes stopped playing. When I try to play, it brings up the  song but stays at 0:00. My subscribed podcasts still download but they  all stay at 0:00 too. I can click on a later point in the song/podcast  and it moves to that point but just stays there as if it is paused but  indicating it is playing in the controls.
    I  have unistalled/reinstalled itunes and have the same problem.

    Hi there Juniorm1,
    Take a look at the article for the current version of iTunes for Windows.
    iTunes 11.1.5 for Windows (64-bit)
    http://support.apple.com/kb/dl1615
    -Griff W.

  • I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

    As the title says.
    I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
    I don't want to restart it because im scared that something might go wrong.
    operating lion

    LimitLess- wrote:
    Hi,
    I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
    Thanks
    I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
    That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

  • I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed.  Error message: Panic CPU  0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platfor

    I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed.  It instructed me to hold power button to shut off and then press again to restart.  Same error message keeps coming up and computer won't boot to home screen.
    Error message:
    Panic CPU  0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
    \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
    Debugger called panic
    Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
    THANKS FOR ANY HELP.
    ROBB

    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
    When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    Don't install the Thunderbolt update -- it's defective.

  • Has any had difficulty downloading an installing the latest IPhone 4 update on ITunes?

    When I try to install the latest IPhone 4 update in ITunes, it downloads the item but at the very end I get an error message telling me the server timed out and to check my internet connection.  I did all this and there are not internet connection issues.  I think I tried all the obvious solutions so far (e.g., I tried the process again, I closed the program and restarted it, rebooted the computer, I tried to "download only"), but the same problem keeps occuring.  Any one else run into this problem? or have a solution?
    Thanks.

    Have you tried temporarily turning off your firewall and antivirus software until the download has completed ?

  • Have installed the latest Airport software update.  Still no wireless

    I was hoping that Apple would fix the can not connect to wireless problem, I installed the latest airport software update but still have the same problem. 10.4 works great but 10.5 will not connect.

    Mine is a long and sad story. I have ComCast cable connected from their modem to an Asanti 4 port router. Connections around our little office area are by ethernet. I then have one router port connected to an Apple snow airport. Out of the office area we use the wireless LAN. All of our PC laptops, our PC desk top and our MacBook Pro (running 10.4) will connect through the snow airport LAN when need-be. All of the aforementioned computers will connect to our city-wide free wireless network, Metro-fi Free. Everything works perfectly except my FW800 running 10.5. For now nothing is incripted. If I turn on my airport card I can see available 6 neighborhood wireless LANs, Metro-fi and the snow base station. I installed 10.4 in a separate HD and booted up. It connects perfectly which means my computer and airport card must be OK. The problem is in 10.5 for sure. I tried to check the update you are supposed to see when opening the airport utility but of course the utility says it can find no AirPort base station. I have reinstalled 10.5, run Diskwarrior and TechTool Pro and found no problems. If I did not have such a bunch of stuff in my system HD I would go back to 10.4. What have I overlooked??
    Bob

  • I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

    I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Having trouble installing the 10.5.3 update

    For some reason, my Macbook won't install the next Mac OSX update, It'll restart and bring up the screen and just stay at the "Configuring INstallation" Screen for hours,
    How do I fix this?

    Can you please clarify - are you able to start up your system and login - or not?
    As I recall, the configuring installation screen comes up when you are running the install from Software Update - after logging in successfully.
    _*If that is the case*_ - then you simply need to delete everything in yourharddrive/Library/Updates/ and run Software Update again. It will then work.
    Alternatively (after deleting whatever is in /library/updates/), you could manually [download and run the combo installer from Apple|http://www.apple.com/support/downloads/macosx1053comboupdate.html].
    _*On the other hand*_, if you can't start up and login successfully, the instructions provided by Simon are spot on.

  • PowerMac G4 won't restart...ater installing the 10.4.2 update

    Hi
    My Mac will not restart after I installed the 10.4.2 update disc. Now, I have used this disc before without any prolems and now my computer will not go beyond the grey screen with the grey Apple logo and progress indicator. I would like to mention that when I had 10.4.7 installed in this very same computer, my iDVD suddenly dissappeared, which meant that I had to re-install my mac back to OS X 10.2 in order to use the sofware restore discs. I did a clean install which meant deleting all my documents and sofware I purchased. Everything went well when I 'Upgraded' back to OS X 10.4. The problem occured when I had to restart after installing the 10.4.2 combo upgrade. I have tried the following things indivdually:
    1) Disconnected the Mac and left it over night like that
    2) Taken the small battery out and reinserted.
    3)rebooted in single mode by pressing command S
    4)Typed FSCK -fy which stated that the volume machintosh HD appeared to be OK
    None of these helped. I've yet to try resetting the PRAM but I don't know where the 'Option' button is located on my keyboard!
    Please help as I have to do my work and I seriously can't live without my Mac. I am panicing and fuming over this! Any help or advice is greatly welcomed.
    Thank You.

    Try things in Apple doc.#106464.
    Also, Try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes Resolving Disk, Permission, and Cache Corruption.
    Cheers!
    DALE

  • I have the iphone 4s, when i installed the ios7 my wifi and BT i nost working, the wifi is in gray and i could no switch on. any solution?

    have the iphone 4s, when i installed the ios7 my wifi and BT i nost working, the wifi is in gray and i could no switch on. any solution?

    http://support.apple.com/kb/TS1559

Maybe you are looking for

  • How do I change the password on my IPhone?

    How do I change the password on my IPhone?  I am using a card that belonged to my former daughter in law and I cannot get the original password.  I need it to change the Restrictions setting because all of a sudden my ITunes apps won't download when

  • Rename in Lightroom

    Hi, I want to rename all my RAW files like YYYYMMDD_40d_+ daily sequence number 3 digit ie. it starts from 001 every day. Is that possible in LR

  • GetELResolver on managed bean

    I have a trouble using the following code:                if(paramId==null || paramId.equals("")){                     resultadoTesis = (ResultadoTesis)contexto.getELContext().getELResolver().getValue(contexto.getELContext(), "#{resultadoTesis}", nul

  • Task ALE/EDI: Error handl cannot be started immediately

    When an IDOC is being created in SAP(3.1I) from an external system(Gentran GIS), it is added with errors status 56. The error text states as 'Task ALE/EDI: Error handl cannot be started immediately 'The task ALE/EDI: Error handl (no. TS00008068) cann

  • HELP!!!! fone won't proceed after start up page

    hope u can help me. my bb won't proceed after the startup page. its just white w/ the blackberry logo in it.. what should i do?