When i load a web page it some times says sorry fire fox has stoped workin

when i open a web page some times it says that fire fox has stopped work and i have to close the web page and it happens over and over again even if i restart my computer or shut it down it works on your sit though please help

stop use it. 1st. if it only happens to some one or two specific website, don't go there with firefox, maybe I.E.7/8/9, or try another 3rd party web browser like google chrome 10.x

Similar Messages

How can I place a MP4 into Dreamweaver and have it autostart when you load a web page?

Hi All
I am trying to place a MP4 video/music clip into a webpage.
I would like it to auto start once you click on the page, play and then the page loads.
Is this even possible?
Thanks in advance to all those who will be able to help

Video Streaming Basics -
http://www.mediacollege.com/video/streaming/
Embed Tag Attributes for QuickTime player -
Look at AutoHref and AutoPlay
http://www.apple.com/quicktime/tutorials/embed2.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Sometimes when firefox loads a web page the error message comes up stating The URL is not valid and cannot be loaded. And I know this is a valid web site. What gives?

This happens very often. When I open Mozilla sometimes I get an error stating that "The URL is not valid and cannot be loaded." When I click ok the site stops loading and the tab is titled untiled.

This can be a problem with DDE.<br />
See http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

When loading ANY web page, it take firefox 3sec to load a blank page. No matter what website I try to load, it just loads a blank page

When loading ANY web page, it take firefox 3sec to load a blank page. I have tried everything, starting firefox in safe mode and dissabling all add ons, turning 6v on and off, turnig proxy on and off, reinstalling firefox, restarting my computer, and reinstalling drivers. I can use another browser to surf the internet but finding one that is as capable to firefox isn't easy.
ps. Firefox did start at one point and then just stoped.
I use Linux Ubuntu 11.04 single boot

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also:
*http://kb.mozillazine.org/Error_loading_websites

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Thanks

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Here's the example:
WING
GAMES
MAJORITY
Thanks

If the third link you posted (the link containing the word "majority") does not look like the following then you inadvertently installed adware.
That particular page should resemble the following:
The word "majority" in the third paragraph should not be a link and should not have the green icon associated with it.
To learn how this may have occurred, and how to prevent it from occurring in the future, read How to install adware
Most so-called "news" websites are nothing more than entertainment outlets that cater to prurient interests, and contain advertisements that leave the user about three clicks away from installing junk. If you decide to frequent those websites, Safari's "Reader" feature helps minimize that exposure.
Try it:

New Safari 3.0.4 Won't Load web Pages, Need some Assistance.

I Too have installed and updated to 10.4.11 from 10.4.10 and too am having problems with the new Safari 3.0.4 ... My Problem like all the others, is for me, Safari isn't loading any web Pages, I just get a blank Page and nothing is happening, its just sitting there doing nothing. What could possibly be the problem and what should I do??
Please someone help Me soon, I do have 2 back up web browsers but I prefer Safari because all my bookmarks are on there.
I wish Apple would fix this glitch before putting out the new Safari, because alot of people are having problems with the new Safari, is there a way that we can contact Apple and complain to them about Safari 3?
Thank you,
Trisha Foster

Trisha Foster wrote:
Im Glad you had solved your problem but I am still stuck on mine, I tried to see if I had a PicLens Plugins in my input manager Folder but I don't, what I have instead is a Folder called Smart Crash Reports info/smart cra...rts.bundle and info. icon document.
Safari 3.0 gets crashed by various 3rd party add-ons ("enhancer" programs and also InputManagers) which are doing things that are incompatible with it.
Based on what is working for other people in this forum, I think you should delete (or move to the Desktop or something) anything in your Mac's (global) /Library/InputManagers folder and also the Library/InputManagers folder specific to your logon to the Mac.
Also delete or uninstall anything else that is any sort of Safari enhancer/speeder-upper/skinner/prettifier.
If that doesn't work, it's possible that some time previously you had some add-on/enhancer thing which directly patched the insides of the Safari.app (ie directly changed the Safari application in your Applications folder, rather than installing itself in some other folders like InputManagers (and Apple has tried to do a non-destructive/merging update and left those unexpected and now incompatible modifications merged-in). In that case there are some instructions posted a couple of days ago on www.macfixit.com how to fully delete the Safari application and reinstall a completely fresh copy of it from the Combo updater for 10.4.11.
Anyway, I'd say the best first step as already posted here is to get rid of anything that is an InputManager or otherwise an "enhancer" to Safari and see if that resolves it for you.
ted.h.

Windows Server 2008 R2 - Won't load certain web pages

Users are unable to access certain websites from either of our RDP session servers (Windows Server 2008 R2 Standard with SP1).
1.) I have tried machines that are not connected to this server (not thin client or RDP), but are on the same network, they can load up any web page fine with no issues.
2.) On the server I have tried Opera, Chrome, IE and Firefox, all have the same exact problem.
3.) Tried different DNS servers just to be sure, even though it only effects the server and no one else.
Based on these facts I know that it is something wrong with the server, but not tied to a specific brower. In all browsers when you load up a page in question it just sits there with a blank screen trying to load, it never generates any errors.
The Event Viewer is also clean, no errors. So with no errors I have had trouble trying to find a starting place for this. Things I have tried:
1.) ipconfig /flushdns to try and clear out any DNS issues
2.) Changing the DNS servers for the server to 8.8.8.8 and 4.2.2.2
3.) Scanning for Viruses and Malware/Spyware
4.) Checking proxy settings on the server
5.) Updating and then removing Adobe Flash (thought it was tied to flash at first). Problem persists even with no flash player installed.
6.) Completed a failed update of .net, no effect
7.) Loading up browsers in debug mode to try and find anything in the site code that I could relate between failed sites. I found nothing I could identify
Of all issues to finally be stumped on this seems like an easy one, but I can't even begin to come up with an idea at this point.
Help is most appreciated, thank you!

Hi,
Extension Mechanisms for DNS (EDNS0 as defined in RFC 2671) allow DNS requestors to advertise the size of their UDP packets and facilitate the transfer of packets larger than
512 octets, the original DNS restriction for UDP packet size (RFC 1035).
But this would cause drop packets because of some DNS servers or hosts don’t support this. This always causes some website inaccessible.
Using Extension Mechanisms for DNS (EDNS0)
http://technet.microsoft.com/en-us/library/cc785769(v=ws.10).aspx
Nslookup, can you get the name resolved?
In addition, try use IP address access the website and check the result.
Hope this helps.

Cannot send email when clicking lonk on web page

I cannot send email when clicking link on web page.
When I would click the link to send via email I was being directed to hotmail to open new account.
Today the tech tried to assist me and completely messed up my email capabilities by setting up
windows live account.
I am thoroughly disgusted with FIOS internet services..Every time I've called them in the past month problem has been with someone else whose portal services they are using.
I cannot send emails because all my contact information cannot be moved.
I'm paying for FIOS internet service that is almost non existent.
THe VZ in home agent doesn't work nor does the FIOS information site.
My next move is to get rid of FIOS.
They create more problems then they solve with me.

If I understand your problem correctly, you are having trouble when clicking on a MailTo link on any webpage? What loads when you click this type of link is a setting in your browser. If you tell us what browser you are using, we can try to direct you to the setting.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Windows Server 2008 R2 - Won't load certain web pages - Happens in all browers - Won't do windows updates

This server (Windows Server 2008 R2 Standard with SP1) is used to host thin clients as well as RDP sessions. One morning the office is fine, they come back from lunch and all of the sudden they can't load certain web pages, such as adobe.com
and pandora.com to name a couple. This was roughly 3 days ago.
1.) I have tried machines that are not connected to this server (not thin client or RDP), but are on the same network, they can load up any web page fine with no issues.
2.) On the server I have tried Opera, Chrome, IE and Firefox, all have the same exact problem.
3.) Tried different DNS servers just to be sure, even though it only effects the server and no one else.
Based on these facts I know that it is something wrong with the server, but not tied to a specific brower. In all browsers when you load up a page in question it just sits there with a blank screen trying to load, it never generates any errors.
The Event Viewer is also clean, no errors. So with no errors I have had trouble trying to find a starting place for this. Things I have tried:
1.) ipconfig /flushdns to try and clear out any DNS issues
2.) Changing the DNS servers for the server to 8.8.8.8 and 4.2.2.2
3.) Scanning for Viruses and Malware/Spyware
4.) Checking proxy settings on the server
5.) Updating and then removing Adobe Flash (thought it was tied to flash at first). Problem persists even with no flash player installed.
6.) Completed a failed update of .net, no effect
7.) Loading up browsers in debug mode to try and find anything in the site code that I could relate between failed sites. I found nothing I could identify
Of all issues to finally be stumped on this seems like an easy one, but I can't even begin to come up with an idea at this point.
I have tried to lay out all of the facts that I know as plainly as I can. I am hoping that someone has seen this before as this issue is effecting a number of differnt users and keeping them from doing portions of their job.
Help is most appreciated, thank you!

I was able to figure out a solution.
CAUSE:
It appears that the Internet isn’t fully up to date and ready to use EDns -- which is enabled on Windows Server 2008 R2 by default. The solution for this is to disable Edns. Note that this isn’t
a problem for most Windows Server 2008 R2 member servers. It’s only a problem for DNS *servers* that do recursive lookups. i.e. likely only your domain controller will be affected if that is where your DNS Server role exists.
SOLUTION:
To disable EDns, you can do it from the command prompt, or by editing the registry.
Create a DWORD called EnableEDNSProbes and set to 0 in HKLM\SYSTEM\CurrentControlSet\services\DNS\Parameters
Restart the DNS Server service for it to take effect.

After upgrading to 9.0.1 Mozilla Firefox for my pc, Firefox will not load any web pages.

After upgrading to 9.0.1 Mozilla Firefox on my pc, Firefox will not load any web pages whatsoever, not even itself. My OS is Windows Vista 64. Thanks for any help. (Having to use Internet Explorer presently.)

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
** '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
Check and tell if its working.

When I print a web page it only prints the first page and not the rest of the web page below the page break.

When I print a web page firefox will only print the first page, all of the content to the first page break and nothing past that.
How can I change the settings so that it will print more than on page?

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Zoom -> click "Reset" -> Page Style -> select "Basic Page Style"
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache, Site Preferences''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

Problems loading certain web pages

Lately, in the past week or two, I have been noticing that Safari wont load certain web pages. It jsut stops and then I get a blank white page with no error message. I have noticed this mostly with Facebook, but also found the same problems with Evite.com when I click the login link. I have tried using Firefox and it seems to d better, especially with Facebook, but it did hang up on it one time. I cant get to the login page on Evite with either browser. I am using OpenDNS, but dont have these things blocked. I can access them fine from a PC laptop through the same connection via my wireless modem.

Carolyn Samit wrote:
HI,
*I cant get to the login page on Evite with either browser*
Open Keychain Access (Applications/Utiities). Select Passwords on the left then delete the Evite under Names on the right. Launch Safari or Firefox, go to the Evite site and login. After typing in your password, click Always Allow
I opened Keychain, but there is nothing in there for Evite under passwords?
Try Safari Maintenance
Repair disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Tried this, but still having problems in both Safari and Firefox. Facebook seems to be random, more often not working than it is. Still no login page with Evite?

I've installed the new safari and it didnt load any web pages

i've installed the new safari and it didnt load any web pages and i dont knw wut to do thank and pleas help as quick as possible

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know after that what happens.

My MacBook Pro won't load any web page I have restarted and safe booted still nothing

My MacBook Pro will not load any web pages. Safari opens but when I click on top sites or type in a website it will start but not get past half of the address before stopping and going no further. I have restarted and restarted in safe boot and still no change. I'm am connected to the internet wirelessly and my iPad mini is connecting to the internet wirelessly fine, so I think the internet is fine. What can I try next?
Thanks

Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes beside all items.
Just check the box beside “Remove all website data”.
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions

FireFox keep saying "unexpected error" when trying to print web pages.

FireFox keep saying "unexpected error" when trying to print web pages. The print preview works OK, but when you try to print that "unexpected error" jumps up.
Please email me on what to do to get FireFox to work.
I don't see anything in the FAQ that might help me.

Hi,
Please also try this setting: Windows start menu or Control Panel > '''Devices and Printers''', right-click the printer > '''Printer properties''' > '''Advanced''', and select '''Start printing after the last page is spooled'''. In this case you can also close Firefox after spooling is over (usually much faster than direct printing), and printing will continue.
Also as a general case, if you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]

When i load a web page it some times says sorry fire fox has stoped workin

Similar Messages

Maybe you are looking for