When I log onto my 2811 router (IOS Ver 12.3(8)T8 it dumps me

When I log onto my 2811 router (IOS Ver 12.3(8)T8 it dumps me into enable mode automatically. Is there a fix for this? Thanks for any help you can provide.

David
There are a couple of things that can result in the session going directly into enable mode instead of into user mode. I think the most likely one is a configuration on the vty lines which specifies privilege level. I suggest that you check the configuration of the 2811 and look under the vty lines for privilege level 15. If it is there remove it and your sessions should start in user mode.
It is also possible that if you are using aaa to authenticate and authorize that the user ID you are using has been configured to automatically give enable access. But I am guessing that the issue is the privilege level on the vty lines.
HTH
Rick

Similar Messages

  • Since updating my iPhone 3GS on my friends laptop, it keeps asking for her iTunes Id not mine. When I log onto a computer it comes up with my Id but from my phone it's my friends. I don't have an option to change the user Id when it pops up either.

    Since updating my iPhone 3GS on my friends laptop, it keeps asking for her iTunes Id not mine. When I log onto a computer it comes up with my Id but from my phone it's my friends. I don't have an option to change the user Id when it pops up either. So I can't update my apps, download songs or games now as it will charge my friend

    Hello, 34sandy. 
    Thank you for the question.  This behavior is normal if updated on another Apple ID account holders computer.  To change the Apple ID on your device, follow the steps in the article below. 
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Cheers,
    Jason H. 

  • Why when i buy books on my ipad, when i log onto the store it does not show that i have purchased them?

    Why when i buy books on my ipad, when i log onto the store it does not show that i have purchased them?
    how many books and songs were therefore lost when i had to wipe my ipad?
    this is SHOCKING from Apple... this is not in my domain of settings!!!

    In the iBooks application on the Mac, there is a checkbox to sync highlights and notes across devices. 
    I don't see a similar setting in the iBooks app on my iPad.  It may require iBooks on the Mac as a mediator.
    Also:
    Can I highlight text and make notes?
    Yes, iBooks includes built-in Highlight and Note features. Highlight any word or passage of text within a book. You can also create a Note from your highlighted selection. Review your Highlights and Notes by tapping the Table of Contents button and then tapping Bookmarks. Highlights and Notes appear in their own section under Bookmarks. 

  • How do I stop programs opening automatically when i log onto my macbook?

    When I log onto my macbook, about 6 programs open automatically. they are not listed on my 'Login Items' and I dont know how to stop them popping up.
    Any help would be appreciated!!

    You do not clarify which email client you are using
    For Mac's mail the only way I know for more control is the Mail AttachmentTamer a easy and free to use plug-in
    http://lokiware.info/Attachment-Tamer

  • Why isn't my outlook opening when I log onto my mac?

    why isn't my outlook opening when I log onto my mac?

    It's probably sleeping in... 
    Look in System Prefs>Accounts for the Login Items. If Outlook is on the list, it may be unchecked. If it's not on the list, add it.
    hope this helps

  • How can I stop Firefox autofilling my email address when I log onto hotmail?

    How do I stop Firefox autofilling my email address when I log onto hotmail?

    Thanks Lawrence. I've spent over 3 hours on the phone/chatting to online support and none of it seemed to help as it all revolved around resetting emails etc but can't do any of it without my access to my old email. Now my phone won't take cloud because they advised to set up new apple ID and use that, but can't sign out of old one completely. Also doesn't help because my phone and laptop are set up on the old one. Thanks for the help.

  • When i log onto safari the screen is grayed out and i no touch features are functioning

    when i log onto safari the screen is grayed out and i no touch features are functioning

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Why am i not receiving iMessages on my phone but when i log onto my mac they are all there?

    I am not getting my iMessages on my phone. but when in log onto my mac they come up on my messages here. what can i do o fix this i need to be able to recieve meaages on my phone on the go.

    I think you answered your own question.  If I read what your wrote correctly, you sent yourself a message to your phone number and you are wondering why it was not recieved on your iPad?  If that is what you wrote, the reason is your iPad is not a cell phone and messages sent to a cell number, will not be received on your iPad.  To send a message from your iPhone to your iPad using iMessage, you need to send the message to the email address you specified when you set up iMessage on your iPad. 

  • HT3309 One User on my iMac seems to be disabled.  When I log onto that User the desktop appears empty and only half of the programs appear on the operating bar.  I cannot open any program and nothing works.  I have to use Command/Option/Esc to restart the

    I cannot access one user on my iMac.  When I log onto that user the dekstop appears unpopulated and blank and half of the programs do not appear on the operating bar.  When I attempt to click on a program such as Safari nothing happens.  Nothing works and I can only exit by doing a command/option/esc and restarting the computer.  The other user and the Administrator work fine.  What has disabled the one user?  How do I recover this user and its files?

    No.. I have been through parental control and it does not affect this problem.  Now if I log onto this user I cannot get out even with a comman/option/escape; I have to unplug the power to the computer to get it to restart with the administrator.  I saw somewhere that there is a process in which I can delete the use and then create a new user with the same name and password and then recover everything - but I cannot find that solution.  This is a real problem for me, as you might imagine.

  • I keep getting an error message when I log onto Firefox and I can't figure out how to fix it, can you help?

    Every time I log onto Firefox I get the following message:
    "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
    I would like to fix whatever is causing this error message to appear, but I haven't found my, "application's profile directory" so that I can check for "read/write restrictions". My hard drive is 640GB with 554GB free space remaining.
    I am running Windows 7 - 64 and am using Avast Internet Security 2013.

    The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
    This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

  • Started my own FT account, but when I log onto it, it has my wife's contact list and she has her own account. How do I establish my own list?

    I started my own Facetime account, separate from my wife's, but when I log on, her contact list is there.  How can I establish my own list without compromising hers?

    Hi peacemakerco,
    Thanks for visiting Apple Support Communities.
    You can use the steps in this article to sign in on the iPhone with the right Apple ID:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Best,
    Jeremy

  • When I log onto itunes it keeps sending me to a blank page, how can I fix this?

    Every time I log onto itunes and try to access the homepage- or anypage, it just goes blank! I've tried to shut the program down, refreshing- EVERYTHING!
    ^^ this is what my page looks like eveytime i try to access I tunes. At the top it shows my last played song and thats it!
    please help me!

    What happens when you click 'Library' at the top right?

  • When i log onto the internet a box come up on the bottom "show all content" how do i stop this

    When i log into windows a message comes up on the bottom of the screen "SHOW ALL CONTENT" how do I stop this message from coming up it is so annoying.
    This question was solved.
    View Solution.

    Hi,
    Close any open Internet Explorer windows.
    Open windows Control Panel, open Internet Options, click the Security tab and click Custom Level.  About half way down, under the heading Miscellaneous, there is an entry for 'Display Mixed Content' - click Enable and then Ok, then click Apply and Ok in the previous window.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT4759 My photo stream is on but i don't see any photos when i log onto icloud

    My photo stream is shown on my iphone and ipad but when i log into icloud on my pc i dont see photos as an option.

    Photo stream photos are not available on icloud.com.  If you want to view your photos on the web from a computer browser, you have to add them to a shared stream with the "public website" option enabled (see http://help.apple.com/icloud/#/mmc0cd7e99).  This will give you a private web to use and/or share with other for viewing them on the web.

  • Safari unexpectedly closes when i log onto youtube. It was woking fine last week anyone else having this problem?

    When I log on youtube my safari shuts down. It works on every other site except youtube. It was working fine last week.

    Hi, and welcome to Apple Support Communities.
    Try deleting Safari's cookies and see if that helps. (This won't cause your bookmarks or favorites to be lost, but you may have to retype your username and password when entering sites.)
    While you're deleting cookies, you could also erase all your "Temporary Internet Files" and "History". This will freshen Safari for YouTube. Then shut down or restart.
    Apple Safari 3:
    → Edit → Preferences (later versions of Safari have the Preferences under Safari in the Menu Bar)
    → Security (tab) → Show Cookies
    → Remove All → Done
    after that:
    → Safari → Empty Cache → Empty
    after that:
    → History → Clear History

Maybe you are looking for

  • MacBook Will Not Turn On After Random Shutdown

    I was running a number of processes on my Mac while servicing another computer, and out of the corner of my eye noticed my Mac just shut down, randomly, with no warning. I have had this issue before with overheating issues, but the laptop turns itsel

  • Automatic creation of Business Partner

    Is it possible to create business partner master data automatically in SAP FSCD when the claim payment is generated from Non-SAP claim system, if yes then how do we set this up.

  • Using GETGUI command --in ALV grid, how to extract multiple DATA

    Using GETGUI command , I am able to get a single value form the ALV grid. Please explain me how I can read multiple data like rows and columns data from the ALV grid. Please be detailed as I already tried selecting the whole block of ALV grid, but I

  • 11g problem with Win7 starter

    Taking a class and the book came with Oracle 11g DVD. Tried to load it onto my laptop and get an error when checking the operating system. The error is something like "expecting 5.0, 5.1, or 6.0 received 6.1" which I am assuming refers to Win7 vs vis

  • IMovie "All Events" folder needs to be deleted.

    There is a folder in iMovie named "All Events" and it seems to contain all the video clips I've used in videos, but I have deleted them from my computer and when I skim over the folder I can see screen grabs from the clips, and it shows that it has 3