When i make a call or someone calls me they cannot hear me but i can hear them, i have reset the phone and taken out the sim - help please x

So if someone calls me or I call them I can hear them but they are unable to hear me, I have reset in settings, turned it on and off, taken out the sim and still this has not worked, please can someone advise x  Many thanks

Try a reset:
Press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.

Similar Messages

  • When I make a telephone call on my Apple 4S, the person I'm calling cannot hear me, but I can hear them.  How do I remedy this problem?

    When I make a telephone call on my Apple 4S, the person I'm calling cannot hear me, but I can hear them.  How do I remedy this problem?

    Remove the protective plastic film that the phone was packed with, covering the mic,.

  • Im 6 days late on my warrinty and I had no clue I was. And now when I call people and when they call me they cant hear me, but I can hear them.

    Im 6 days late on my warrinty and I had no clue I was. And now when I call people and when they call me they cant hear me, but I can hear them.

    Apple Store Genius makes all decisions regarding implementation of Warranty Coverage. Maybe you have AppleCare coverage and don't even know. If the Genius decides to cover under Warranty then it was worth taking to Apple. If Genius decides no Warranty, then replacement iPhone 4 is $149.

  • When making calls why they cant hear me but i can hear them?

    When making calls why they cant hear me but i can hear them?

    good question. try to record a voice memo on your phone. if you can't hear yourself, it means likely that your mic isn't working, which would explain why no one can hear you on the phone

  • When i answer a call on speaker for some reason they cant hear me but i can hear them

    Recently my iphone 4s' speaker went out or something everytime i receive a phone call and try to talk with them threw the speakerthay cant hear me but i can hear them any suggestions on what it can do to fix this ?

    Hi Yes0,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with the mic on your iPhone because you can hear them and they can't hear you. The article linked below outlines the available resolutions for this issue.
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    I hope this helps.
    -Jason

  • Can anyone help me on this problem? Caller cannot hear me , but i can hear caller voice?

    I'm new to IP 4; caller cannot hear me - but i can hear caller>> is this a network problem or phone problem?

    hi noor zilawati,
    Just for your info,
    1)Pls do try to turn off n on the phone for up to 5  times. ( to reboot the program )
    Maybe you need to take out the battery n put in back again. Just be patient.  The phone may not be okay straight away. Maybe after a day or two , the phone will go back to normal operation.
    2) Try using the handfree set or earphone. If it is working, this shows your phone is ok. Maybe you have to bear with the inconvenience of using the earphone for a day or two.
    3) Remember, if you send back to the supplier like digi,maxis or celcom -  the technician over there will do just the same. They will say they need to send your phone back to factory or they will ask you to register the complaint
    and ask you to wait for the spare parts.
    4) IF IT IS POSSIBLE, JUST ASK THEM TO REPLACE A NEW PHONE FOR YOU ! DEMAND YOUR RIGHTS!
    Hope the above  is helpful to you.
    Best regards,
    Hugh
    ps. you can contact me at [email protected]

  • When I'm on facetime the other person cant hear me but I can hear them. Why is this?

    when I'm on facetime the other person cant hear me but I can hear them. Why is this?

    Make sure youe volume is turned up and your microphone isn't muted.
     Jackson

  • When using Skype with my MBA people can't hear me but I can hear them. Please help!

    When using Skype people cannot hear me but I can hear them. Please help!

    Hello there, Maribelita.
    The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • When I phone with my iphone 4 they don't hear me but I can hear them. What to do about that?

    When I phone with my iphone 4 they don't hear me but I can hear them. What to do about that?

    Try disconnecting the headphones and then adjusting the volume, does it say headphones?
    If it does, there might be something in the headphone jack, maybe lint, dirt, or something else in there.
    You can try getting it out by connecting the headphones 5-10x or spraying compressed air into the jack.
    If it doesn't say headphones or there isn't anything in there, try restarting or restoring the iPhone.

  • Iphone 4,when i make calls people cant hear me but i can hear them.

    Ive tried resetting the phone and this has not worked. I have also tried using the voice recorder app to see if its a problem with the microphone and i can hear myself perfectly when i play it back. just wondering what to do?

    I saw one post where a user said dust got in the small mic hole. Used a vacuum cleaner to remove and audio restored. Try it.
     Cheers, Tom

  • Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen.  Even ending a call is difficult as the screen blanks out within seconds

    I have to use the Keypad a lot when making calls.  Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out.  Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions.  Back and forth just trying to enter the options is a pain.  Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
    If I use the Speaker function the keypad works; the speakler phone is not alway appropriate. 
    It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle.  This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates.  It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem. 
    I'm not sure if it's a hardware or software (design) issue.

    It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
    Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

  • When I am using my blue tooth when my phone rings I have to take it off the phone and connect to the blue tooth. i want it to go to my blue tooth automaticly

    This is my first time using this chat if I get it wrong count it to my head and not my heart.
    When I am using my blue tooth, when my phone rings I have to physically take it off the phone and push it to my blue tooth. How can i get it to do it automatically?

    Answer the call using the bluetooth device instead of swiping to answer on the phone. If you swipe to answer on the phone, it assumes you intend to use the phone instead of the bluetooth headset.

  • When i make calls people can't hear me but i can hear them and when i switch ti loud speaker they can hear me! can anyone help??

    When i make calls no one can hear me unless i switch to loud speaker!
    tryed to make an appointment on the apple website when you click iphone it dosent allow you to progress whats the point in having that when it its no use!!!
    can anyone help in regards to ppl not hearing me??

    Hi rawmau,
    Welcome to the Support Communities!
    As a first step, I would suggest restarting and/or resetting the iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Here are some additional troubleshooting steps for sound on your iPhone:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    - Judy

  • When I make a call, the caller cannot hear me, but I can hear them?

    How do I go about correcting this?  I have reset my network settings and checked that the mute is not on??

        SouthernJo, Let's make sure your phone is connected properly! Blue lights are usually a  good sign. LCan you please dial #48 on your handset to ensure you're connected http://vz.to/1BbtYmA?  What message do you hear when doing so? We'll figure this out, together.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport 

  • HT1689 when i mke or recieve a call callers cant hear me but i can hear them

    the phone has been doing this since i activated it, im making sure im not hitting the mute button when i answer, the only way they can hear me is if i put the conversation on speaker, in the settings its set to default, please someone help lol

    Make sure youe volume is turned up and your microphone isn't muted.
     Jackson

Maybe you are looking for

  • Crystal Reports Runtime 13 not found in sequence on App-V 5.0 SP2 Hotfix 5 client

    My application uses a VFS installation of Crystal Reports Runtime 13. (i.e., the path to CR13 isn't specified as the Primary directory during sequencing, as my app uses that particular path) On a test VM with an old App-V client (5.0.285.0) the appli

  • System-wide Spell Checker Error

    I newly installed Leopard on a MacBook Pro, and now in Mail, Safari and iTunes, I get a "Couldn't contact Spell Checker" error message when I try to type in these programs. The problem disappears in Mail if I set Spell Check to never in the preferenc

  • Mountain lion freezes

    I upgraded to mountain lion but applications start to freeze whenever oppening app store, clicking share button on safari , signing in into twitter from system preferences , I verified disk +  permissions and repaired them, but this did not solve the

  • Why do we usually have to figure it out alone?

    Why does it seem like most solutions must eventually be found by the user (even if he's new to Logic)? Is it because we all work so differently, or do we only acquire enough knowledge to get our own work done? It's a serious question, not a putdown.

  • My mighty mouse has died(sort of)  and I have a system prefs conundrum

    The mighty mouse when pressed now registers every click as a request for dashboard ( as I set it up in sys prefs to be centre button for dashboard) now the mouse is no longer working correctly and will only register centre clicks ... How can I set th