When I make a project in iDVD'09, there are sometimes green blocs with points flickering in some scenes of my iMovie-film. In iMovie there is no problem with this film, but the problem begins by exporting to iDVD and making a project there.

When I make a project in iDVD'09, there are sometimes - at voluntary moments - green blocs with points flickering in some scenes of my iMovie-film.
In i-Movie there is no problem with this film, but the problem begins by exporting to iDVD and making there a project.
Who can help me, then I cann't find everything about this in any forum?

Hi
Can be a problem that get multiplied and visible when iDVD encode for DVD.
A. See if problem can be isolated to a single frame in the movie and re-import this clip and see if it's better
B. When free space on Start-Up hard disk goes low - strange things like this might occure. I never go under 25Gb free space on this Start-Up Mac OS hard disk !
C. Does this problem arises what ever encoding quality You use ?
Yours Bengt W

Similar Messages

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Parts of my iMovie freeze (but the sound continues) once exported to iDVD

After completing a movie on iMovie, I have exported it to iDVD and 'Movie' formats then burned them to disk, but both movies freeze in exactly the same place whilst the audio runs through as normal.
When I play them in imovie they run as normal.
Why is this?

Some possibilities:
Check out this thread for a possible solution: http://discussions.apple.com/thread.jspa?messageID=7305234&#7305234 Perhaps renaming the file would help.
I don't know if ithis has an effect on the file, but why is it saved in documents rather than music or movies?
Also, are you using iTunes to convert the file to .aiff? Here is the procedure from iTunes help:
*Choosing AIFF and WAV custom import settings*
If you use AIFF or WAV encoding, you can use custom settings for greater control over the quality and size of imported files.
To choose AIFF and WAV import settings:
1. Choose iTunes > Preferences, click Advanced, and then click Importing.
2. Choose AIFF Encoder or WAV Encoder from the Import Using pop-up menu.
3. Choose Custom from the Setting pop-up menu.
4. In the dialog that appears, choose settings:
Sample Rate: The number of times per second the music waveforms are captured digitally. The higher the sample rate, the higher the quality and the larger the file size. Don't choose a sample rate higher than the rate used to store the music originally or you'll waste space. CD quality, for example, is 44.100 kHz, so choosing a higher rate when you're encoding from a CD is unnecessary. In general, the best choice is Auto, which uses the same rate as the original music.
Sample Size: The number of bits used to store each sample taken as the music is encoded. The higher the sample size, the better the quality and the larger the file size.
Channels: If you don't have stereo speakers or if your audio files are monaural (mono files are about half the size of stereo files), choose Mono. If you'll be listening through headphones or a stereo system, choose Stereo or Auto. Auto converts monaural tracks into mono files and stereo tracks into stereo files.

My firefox crashed when upload file on our web based application. This happen on two PC, even during firefox safe mode the problem still exist. But the problem

Dear All,
My firefox (version 23 on win 7) crashed when upload file on our internal web based application. This happen on two PC, even in firefox safe mode the problem still exist. So, my first conclusion the problem nothing to do with extension. here the crash ID https://crash-stats.mozilla.com/report/index/81220865-36c0-4e10-a484-6d27e2131023 and https://crash-stats.mozilla.com/report/index/86d2b779-9730-4d2c-b276-a86d42131023. I wonder if this happen because jquery modul in our web based application. But when I tried on my laptop, the problem dissapear. I tried to replicate same situation on different server, I mean I put the exact same application source to other server, never meet the same problem. Thus, I suspect may be it related to antivirus that installed in our network which is kaspersky. I am googling, never meet the clue.
If you meet the same problem, please help me.
I am so sorry for my poor english.
Him Him

The crashes are a problem with the winhadnt.dll file (OCular Agent from TEC Solutions Limited) as you can see in the crash reports.
*http://www.freefixer.com/library/file/winhadnt.dll-52397/

When I start up the computer, the dialogue box opens and saying that the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I redownload itunes, but the problem still persists. How can I fix this?

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

I can't back up my information to iCloud and sync them to my iPad. I tried to reset the account by erasing everything in the account but the problem is still there. Can someone let me know how to delete everything in my account and start a new backup.

Hello,
I'm having probelms backing up my information to my iCloud account. I tried to reset the account and erase everything in my account but the problem is still there. The problem is that my iPhone is not able to complete the backup process and all it is saying a problem occured.
Someone Pleas let me know how to reset my account, delet everyhting in the Cloud and start a new backup.
Thanks very much,
Dalal Tammar

Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync.

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not sync more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync process. The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack. Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause. The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that. Your advise would be enthusiastically received.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7

Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7.

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

Here. Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem in game world strike

Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem want or were can I fit it pls

The e-mail for World Strike support is: [email protected]
You need to contact them with your questions.

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

After upgrading to yosemite on my macbook pro the spinning wheel does not go away.i have reset the SMC and PRAM but the problem still persists

After upgrading to Yosemite on my macbook pro,the spinning wheel doesn't go away.I have reset the SMC and the PRAM but the problem still persists.Can anyone please help

Try starting in Safe Mode
OS X: What is Safe Boot, Safe Mode?
Try booting to Recovery and repairing the startup disk
OS X: About OS X Recovery - Apple Support
Reinstall Yosemite
OS X Yosemite: Reinstall OS X
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps.

My friend sold me his iPod touch 3 gen 32gb but the problem is it's disabled an it ses to connect to iTunes an when I do connect it ses first I have to enter the password on the iPod but I can't cuz the screen stays the same what should I do

My friend sold me his iPod touch 3 gen 32gb but the problem is it's disabled an it ses to connect to iTunes an when I do connect it ses first I have to enter the password on the iPod but I can't cuz the screen stays the same what should I do

connect it in recovery mode, then set it up as a new device.

Since I installed Nero 2104 I get an error message when I try to start iTunes: registry settings changed probably due to other cd/dvd burning program please reinstall iTunes, which I've done using repair option but the problem persists...?

Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

My ipod touch displays message "ipod touch disabled,connect to itunes."I have held down on/of switch until apple logo appears on screen of ipod touch , but the problem persists. Any suggestions?

My ipod touch displays message" ipod touch disabled,connect to itunes. Ipod touch does no connect with i tunes. I hold on/off switch on ipod touch until Apple log appears on the screen, but the problem persists. Any suggestions ? I am running Itunes 10.6(7) My Mac OS X Version is 10.5.8.

I connected ipod touch to my IMAC while holding on/off switch as stated to by anothe community memberand problem is solved. I wasable to update and reatore. I have been trying to solve the disable problem
for weeks. althou you did not actually solve the problem, In time you probably would. You were on the right track Thank you.
This helped me
rbrookstone

When I make a project in iDVD'09, there are sometimes green blocs with points flickering in some scenes of my iMovie-film. In iMovie there is no problem with this film, but the problem begins by exporting to iDVD and making a project there.

Similar Messages

Maybe you are looking for