When i make i call they can't hear me? what i need to do?
I have Iphone 4. it was working well but now when a make a call nobody can't hear me. i need to press any bottom?
Hello Californiapink,
It sounds like the ooVoo app on your iPhone is not playing audio. I recommend following the steps in the article below for an issue like this (you can skip step 3 since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M.
Similar Messages
-
when i make a call, i can't hear the other person but they can hear me. when i get a call, i can hear the caller, but they can't hear me. what's up?
Hello there, Maribelita.
The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
When i make a call they can hear me but i cant hear them
when i make a call, they can hear me but I can't hear them. If I put it on speaker, then I can hear them. I have reset my phone-that doesn't solve the problem.
If there's no obstruction in front of the headphone speaker and the volume is pumped up to max, the component may be kaput. So yeah, a trip to the Store will be inevitable.
My boss got an i5 in mid--Jan. Not a week later, her callers started complaining they couldn't hear her. She eventually ended up in the carrier's customer center (no Apple Stores over here), where they gave her a new-from-the-box replacement, no questions asked. You may get lucky too. -
when I make a call I can barely hear the ring or the voice of the person on the other end, but they can hear me fine
iPhone Volume Controls
iPhone Sounds & Silence
ÇÇÇ -
TS1631 When I make a call others can't hear me?
When I make a call others can't hear me?
If your microphone is not blocked (at the bottom right) try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair. -
when i make a call the person on the other end is hard to hear ,how do i turn up the volume on the phone so i can hear them better pls help
When on a call, press the round button with the + on the side of the phone until the volume is where you want it.
-
When I make a call, I reach my corresponddents (who can hear me) but I can't hear anything. Can anyone help?
I would first try contacting your carrier, see if its something with their network. If thats all good then you can try restarting, resetting, and even restoring your phone to see if that helps.
If all else fails then I would recommend going in to an Apple Store to see if this could be a potential hardware issue with your phone. -
I have also heard about the problem by surfing the web, but what to do ????? /:
I had the same issue the last couple of weeks. Several recommendations I found that I tried without success:
* power off and power back on
* inserting and removing headphones several times
* checking various settings and switching them off/on (bluetooth, airplane mode, etc.)
I recently upgraded iOS to 4.3.3 (the latest patch to resolve location issues) and I can now hear through the earpiece.
I am skeptical because I also read where someone took it to an Apple store and got it fixed somehow, but then when they sync'ed again, the problem came back.
But, for me, updating iOS somehow fixed the issue. I'm not sure if this was an issue that was addressed in the update since I think the update was mainly for the location/caching controversy. -
When i make a call, i can only hear other person on speaker phone not normally
When I make or receive a call on my Iphone 4, I cannot hear the other person unless I put it on speakerphone. Any ideas how to correct this? Thanks. Lorraine
I am currently having the same problem. My iphone 4 is only 4 months old. Did you ever solve this problem?
-
When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.
I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.
-
NNeed help I connect my iPhone 5s to Bluetooth in my 2015 GMC Terrain. When I make a call i can hear them but they can't hear me. Anyone else have this issue? How did you resolve it. Other phones work fine, just not my phone.
Hello Sandylynn,
After reviewing your post, it sounds like you can connect the device with Bluetooth and make and receive calls but they dont hear you. I would recommend that you read this article, it may be able to help the issue.
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
People can't hear you during a phone
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
i have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker
Hi gallimore1998,
It sounds like you may be having an issue with one of the microphones on your iPhone. Here is an article that will help you address this:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
When I make a call, I can hear the other person but they can't hear me? Tried everything. Took it to the local ATT store and all they could tell me is it shouldn't be happening and to take it to an apple store? Any ideas?
Try to isolate the issue. Use earphone and if the issue still happens then it might be the phone issue.
- If earphone works fine then it may be the mic on the iPhone. Try cleaning the debris on the iPhone. Finally a restore of the device and try to set it as a new device. Tha will isolate if it is a software or hardware issue.
- You can take the phone to Apple store once you have tried all this. -
When I make a call, I can hear the other person, but they can't hear me. If I put it on speakerphone, we can both hear each other fine. What is wrong?
take a look at the link
Iphone: hardware troubleshooting
http://support.apple.com/kb/TS2802 -
HT201229 When I make a call I can't here any thing
When I make a call I can't here any thing
Hey jackie8457,
Thanks for using Apple Support Communities.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Have a nice day,
Mario
Maybe you are looking for
-
HT201335 how to fit airplay mirroring to tv screen
I have set up Airplay mirroring from my ipad to TV but it does not fit the TV screen, there are black spaces on both sides of the TV. How can i fit it to fill in the whole screen?
-
Dear experts, I have to create a template for an invoice. I have a problem. In the combo box where there is the list of the tables, I can't find the INV3 table. I need some values of this one. How can I do to solve this problem? Thanks.
-
I am unable to print shipping labels from USPS
I am prompted to install adobe 6 or higher on my IPAD I have adobe 10.6 But I am stll unable to save label as a PDF or print to an air port Please help me sync www.usps.com with My adobe and IPAD
-
Smart Collection-Collection Filtering
Is there a way to use a smart collection to filter on another specific collection name? Trying to use a smart filter to show ranked photos from 2010 which are NOT in the Best of 2010 manual collection. As I move photos into the Best of 2010 collect
-
Forms: how to use COUNT_RECORD to get the number of record retrieved?
After GO_BLOCK(BlockName)EXECUTE_QUERY, there must a way to obtain the number of records retrieved. I like to use this number to display to number of records on the form. Clearly, a not so good way is: SELECT COUNT(*) INTO :NUM_RECORD FROM Table_Name