When I mouseover project there is a little red number displayed what does this signify?

When I mouseover a project in Aperture a little red number is displayed in the bottom left corner of the key photo.  It is the same number for every project in my library.  What does this signify?

Thank you.  First time positing here, sorry forgot the details.
Aperture 3.4.5
Mac OS X 10.7.5
I had just installed Aperture a few hours earlier.  I was in viewer.  I was in Library Tab.  Then selected Projects. Of course this morning it is gone, should have gotten the screen shot earlier.  But every project when I would mouse over it, it has the little 'i" in a circle in the bottom right hand.  Before it also had a little red oval with the number "201" in it in the bottom left hand corner.  Wish I had gotten the screen shot. 
It is gone now, so any solution would only satisfy my curiosity.  Thanks for reading and posting.  I will do better with my next question  :-)

Similar Messages

  • HT1926 I am getting an R6034 error when I attempt to download the latest version of iTunes. What does this mean?

    I am getting an R6034 error when I attempt to download the latest version of iTunes. What does this mean?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99885)

  • When trying to re-install itunes i get error HRRESULT:0x8007054F what does this mean?

    I am useless with technology and desperately need help!  When trying to re-install itunes i get error HRRESULT:0x8007054F what does this mean? I have followed step by step guide to de-install then re-install itunes as instructed when i couldnt connect my new ipad to my computer to synchronise it with my exisiting itunes account initially set up with my ipod. I successfully re-nstalled itunes but it wouldnt open and told me to de-install and re-install again.  This has repeated several times and now i get this error message. I dont know what to do next? 

    HRRESULT: 0x8007054F
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 8007054F, or some other number? (If they're another number, what number are you getting?)

  • Have a Deskjet 6980 theres a red drop lit by the ethernet and wireles display, what does this mean

    I have the HP deskjet model # C8969A what does the red drop that is lit mean on my display

    Hi again
    Well I tried eliminating my printer, and starting over again like you suggested, but still cannot get my printer connected to my access point wirelessly.
    Also, when I was in the process of installing the printer, I received the following message:
    "System extension cannot be used
    The system extension “/System/Library/Extensions/IOFireWireMxBt.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update."
    What the heck does that mean??? 
    Thanks!

  • In messages, next to my nephew's name there is a little grey moon icon. Does this mean he is set to DO NOT DISTURB?

    On his mother's phone (4s) there is no moon. SO he doesn't get updates from the rest of the family on events we talk about. Is this as simple as updating the DO NOT DISTURB or is there a list somewhere in FAVORITES (contacts) that he needs to  update too?

    He likely has the Do Not Disturb feature on, but only for select people, and the people you mention that are in the conversation, are likely people your nephew has added to the group under do not disturb.

  • Error message when downloadingon my Mac (Error on local file open #2038).  What does this mean??

    When downloading from library using ADE  and transferring to my kobo touch I get the above error message on my Mac computer.  Can anyone help me figure this out?

    Haven't heard from anyone about helping with my downloading problem.  Is there anyone who can help me??

  • My ipod will not sync with my itunes because there is not enough memory.? what does this mean.? how do i fix it?

    Alright, so my Ipod will not sync with my itunes accoutn because there is not enough meemory. Apple is refusing to help me becasue it wasn't purchased recently. So if anyone has any idea what this means, or how to fix it, I'd be greatful for your tips and suggestions.

    What is the wording of the message? I do not understand what memory you are refering to.
    Computer memory (RAM)
    Computer storage (HD)
    iPod memory
    iPod storage.

  • Ok so I have a iPod classic and I have had 1 before and I charge it fully then when I'm scrolling or listening to music the battery goes down then if I just leave it it goes up this has happend with bouth of my classics it is also brand new what does this

    My iPod classic battery goes down when I'm listing to music and when I don't touch it it goes back up again what does this mean this is also brand new

    AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

  • I'm getting the message -50 error when i try to export my project on iMovie '09. What does this mean??

    I'm getting the message -50 error when i try to export my project on iMovie '09. What does this mean??

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    free space on internal boot hard disk? How much ?
    Video codec
    streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    in what format ? .jpg, .bmp, .tif, else ?
    Audio
    from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    iMovie/iDVD preference file
    The "com.apple.iMovie.plist" file or "com.apple.iDVD.plist"
    Many users has not observed that there are TWO libraries.
    _ Library - at root level
    _ Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    Where do Your material come from
    Camera
    External hard disk
    USB-memory
    And all are connected so that iMovie can find it ?
    from: jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    from Karsten S
    Shorter clips than 1,5 sec might be one of the culptrits
    Bengt cont.
    Set-Up might differ
    Mac OS - most probably X.7 or more
    iMovie version - more than iM'11 v. 9.0.4
    Action taken
    Finalizing project - I never do as I never understood the gain to do so
    Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
    fps - set - I only use PAL (25fps)
 
    Yours Bengt W

  • There is a little red circle with a 2 in it over my iWeb icon

    Hi There,
    I have a rather strange problem and I am a bit embarrassed by it, because I don't know what it means. Anyway when I open iWeb 09, there is a little red circle with a little number 2 in it appears over the iWeb launch-bar icon.
    See this screenshot for a more detailed explanation: https://files.me.com/jasongtelford/otc2kg
    Can someone please tell me what this means because I have looked every where and I cant find out. I am beginning to think that there might be something wrong with my iWeb
    Also can you please tell me how to find whatever thing it is that it represents

    Thanks so much for telling me. I have now figured it out thanks to you LOL it was to do with the comments on my blog

  • Today i wanted to take a picture with my iphone 5 and then i saw that there was a little red stain on my picture. First i thought it was a bit dust but i see nothing on my lens so what is this and wat should i do ? ....

    So as I already said
    I saw today that there i a little red stain on my pictures if i use my camera
    The stain wasnt there yesterday and i cant get it away
    What is is and how can i get it away
    Should i go to an apple store or can i fix it myself
    My iphone 5 is only 2 and a half month old ...

    Welcome to the Apple Community.
    I think you'll find it means you don't have enough storage available on your phone.

  • When I publish projects with AICC reporting enabled the SWF "breaks" and does not load.

    When I publish projects with AICC reporting enabled the SWF "breaks" and does not load. If I change the publish method to SCORM the SWF works, and if I turn off reporting the SWF also works.

    OK.  That makes sense now.  Captivate 6 changed over to Rustici's LMS drivers.  Cp7 must have made even further changes that mean you must have an LMS present if you turn on reporting.
    I would suggest you just turn off reporting while you are testing other aspects of the course functionality during development, and only turn on reporting when you are ready to upload to your LMS.

  • Logic 10.1 for a specific project; there is no mixer and the display is completely erratic.

    Logic 10.1 for a specific project; there is no mixer and the display is completely erratic.  For other projects it's working for now.  Please help

    Try this Safari5.1 from the installer package
    http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
    The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link,  it took about 4 minutes to download on my test.

  • I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

    I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

    Audacity > Preferences > Directories.  You will probably need to use an external drive as it sounds like you Mac's drive is getting too full???

  • I plugged my iPod touch (4th generation) into my computer and when iTunes popped up, there was a notice that read "The iPod cannot be used because the Apple Mobile Device service is not started". What does this mean and what do I do?

    I plugged my 4th generation iPod touch into my computer and when iTunes popped up, there was a notice that read, "The iPod cannot be used because the Apple Mobile Device is not started". What does this mean and what do I do?

    Type "Apple Mobile Device Service" into the search bar at the top of the page by Support and read the help article.

Maybe you are looking for

  • Capturing Stock in transfer qty and open PR qty

    hi I am developing a report where I want to capture the following data: 1) Stock in transfer CC quantity (Inter company transfer) 2) Open PR quantity Can you plz suggest from where(Table name) I can capture this data? Answer will be awared with full

  • Stock in Transit Value

    Hi Experts For the Intercompany STO, i want to see the stock in transit value of the std cost. Any Tcode/Table/Program to cater this ? I used the MB5T it gives only the P.O value, wherein requirement is for the std cost. Thanks in advance Rgds Nile.Y

  • Filling Activity fields in the Interactive Script in the IC WinClient

    Hi Experts My question is how to pass parameters between two workspaces. More specifically between the workspace of the Interactive Script WinClient and the workspace Activity. The thing is that after i finish navigating in the script, i need to call

  • Black Square Image on Screen

    There is an image of a black square with an up arrow on the lower right corner of my screen. Does anyone know what that is? Sometimes it has a line though it. Thanks. Solved! Go to Solution.

  • Error during chmlib update

    Here is the output of pacman -Syu: 1:58% pac chmlib ~ :: Synchronizing package databases... core is up to date extra is up to date community is up to date resolving dependencies... looking for inter-conflicts... Targets (1): chmlib-0.40-1 [0.03 MB] T