When i open a new tab, the previuos one do not respond. If i close this new tab, the older one works fine again

I have latest version of Firefox, and Windows XP SP2

Try to use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

Similar Messages

When i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll the specific module caould not be found" i think this may be the reason why i can not open itunes store

when i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll the specific module caould not be found" i think this may be the reason why i can not open itunes store

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

TS3899 Cannot Get Mail The mail server is not responding. Verify that you have entered the correct account info in mail settings. What can I do?

When I try to access Mail I get the following message "Cannot Get Mail. The mail server is not responding. Verify that you have entered the correct account info in Mail Settings". I have entered the correct account details and even deleted them and re-entered them but to no avail, Help.

Try deleting the email account and readding it in the "other" tab instead of Yahoo/gmail, etc

Developer Studio:Exception:The message server did not respond within 60 sec

Folks,
I am getting this error in Developer Studio ( J2EE Engine Preference) , Can anyone please tell me what is the issue.
Exception: The message server did not respond within 60 sec.Please check if the message server is running and if the socket connection has been established
Thanks,
Manish

If the system information page is showing 3900, you should use 3900 in your studio settings.
39xx is the new default for 2004s. It was 36xx with 2004. And xx is the instance number.
Regards,
Christophe
Message was edited by:
Christophe Benoit

Exception:The messege server did not respond within 60 sec.

When I am deploying my application it is aborted and displaying the Error as
'Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !'
In Preferences >> SAP J2EE Engine I have specified a messege server host and its port.
When I go to the Perspective J2EE Engine there I can see an error i.e.
'Exception:The messege server did not respond within 60 sec.Please check if the messege server is running and if the socket connection is established'
How to resolve this?

Hi,
I think the connection data is somehow not right.
What is your message server host and port being configured?
I think the default message server port is 3601
Regards,
Vincent

Exception: The message server did not respond within 60 sec.

Folks,
I am getting this error in Developer Studio ( J2EE Engine Preference) , Can anyone please tell me what is the issue.
Exception: The message server did not respond within 60 sec.Please check if the message server is running and if the socket connection has been established
Thanks,
Manish

Hi,
I think the connection data is somehow not right.
What is your message server host and port being configured?
I think the default message server port is 3601
Regards,
Vincent

When I click "File" and then "New" it keeps opening a new file as a layer and not a background. RGB is selected as the mode.

When I click "File" and then "New" it keeps opening a new file as a layer and not a background. RGB is selected as the mode.
With new files opening as a layer and not a background I'm not able to create multiple layers and it wont let me convert the layer to the background.
How did this happen. I used PS just yesterday and had no problems. Today my computer did mandatory updates and now this.

Yes. You are using the Ellipse Tool's Pixel option. So it is laying down pixels as it is supposed to do without creating a layer.
Choose the Shape option:
Also Layer menu > New Layer creates layers and the curled paper at the bottom of your Layers palette also creates a New Layer. I hope those work.

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
**Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
** See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

I have this issue. Album artwork was totally fine before. After this update, it is all messed up and even got messed up when transferred to my iphone.
iTunes doesn't have the artwork anymore, but then iPhone has it but shows wrong artwork with wrong albums.
Please fix!

When I open a jpeg image at 100% is too large to see. How can I change the percentage to be able to view document?

When I open a jpeg image at 100% is too large to see. How can I change the percentage to be able to view document?
== This happened ==
Every time Firefox opened

You have to change the settings in whatever program you use to open the jpg. Firefox has no control over that. What program do you use to open jpg?

When i compose a new message and am typing in the name of the person to send it to it says iMessage after their name but when i click it says "Bonjour (offline) " my bonjour account isn't even enabled!? and it all used to work fine

When i compose a new message and am typing in the name of the person to send it to it says iMessage after their name but when i click it says "Bonjour (offline) " my bonjour account isn't even enabled!? and it all used to work fine please help!

Hi,
I invoked New Mesage
I typed a Name in Manually (rather than using the blue + icon)
I clicked on the "to" name and got this
Uploaded with Skitch!
I don't get a Bonjour Option here.
I do get a Jabber ID showing up for them but for soem reason it does not list my "From" account.
I would say that I have seen multiple "To"s and the same for the "From" choices and I think I have seen the Bonjour one listed.
However the "To" And "From"s don't seem to match and it appears you can iMessage Jabber names/ID or Jabber AIM names (which you can't in either case)
10:06 PM Thursday; March 8, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When I click on an article to read in yahoo news,why does the timer come on and the message" mozilla firefox not responding"?

When I sign out of e-mail, go to yahoo news, and select an article to read, The sidebar will not go up and down to read the article and the timer comes on for quite some time.The message "mozilla firefox not responding. This has been going on for quite some time. Thank you

hello, please try if you can resolve the issue by resetting firefox (this will keep your bookmarks & passwords): [[Reset Firefox – easily fix most problems]]

When i open firefox it runs in background but does not open. if i disable the internet connection immediately it opens. each and every time i do this when i start work. what kind of problem is this

i am using windows xp profession sp3 os
when i open firefox it runs in background but does not open(see through task manager or one message "firefox is already running in background" when i again click the icon.)
if i disable the internet connection, immediately it opens. each and every time i do this when i start work. what kind of problem is this
== This happened ==
Every time Firefox opened
== i every time starts firefox

I had the same problem and it was because of my firewall settings, which I had set to block all activity and forgot to reset it.

I get the following message when I open Photoshop: Photoshop detected graphics hardware that is not officially supported...which asks me to "uncheck the use Graphics Processor...but there is no Graphics Processor to check ?????? What do I need to do? I ha

I get the following message when I open Photoshop: Photoshop detected graphics hardware that is not officially supported...which asks me to "uncheck the use Graphics Processor...but there is no Graphics Processor to check ?????? What do I need to do? I have ignored this in the past and Photoshop seems to work OK but still I wonder why this opens every time I start Photoshop. Thanks for considering my question.:>)

As you can see use Graphics Processor is NOT checked. Now what? And a special thanks for answering me about this. :>)
Diana

Hi guys I deleted my extension"bitdefender antivirus"but when I switch on my mac safari open up itself asking to instal the extension above what can I do to avoid this pain in the behind?Thanks

hi guys I deleted my extension"bitdefender antivirus"but when I switch on my mac safari open up itself asking to instal the extension above what can I do to avoid this pain in the behind?Thanks

Uninstall "BitDefender" completely, not just the Safari extension.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
Back up all data before making any changes.
You will generally have to reboot in order to complete an uninstallation. Until you do that, the uninstallation may have no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

When i open a new tab, the previuos one do not respond. If i close this new tab, the older one works fine again

Similar Messages

Maybe you are looking for