When I open an text-attachment sens by mail, I only get it in the modus 'only reading'. I can't find a tool to change that modus in so that I can work in it with my version Oracle Openofficie 3.3.

When I open attachments, send to me by two different emailprograms, I only get the 'only read'modus. So I am not able to work with the text.
I use the OpenOffice.org 3.3. from Oracle.

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

Similar Messages

  • I had bay the iPhoto and now i can't download it withe my version 10,7,5?

    hi
    i had bay iphoto and and one month later i had problem with my imac and i hade to forrmat it .
    i have now the version 10,7,5 and i cant download the iphoto agin and tell i cant download it becaues i need the version 10,9.
    kindly help
    thanks

    Whatever you read about iTunes is wrong unless you're actually referring to feature movies, not videos. Videos, apps, music and iBooks you can re-download:
    http://support.apple.com/kb/ht2519
    Download to your computer and then sync to your iPod touch whatever will fit.
    And no, I can't say with certainty that they won't give you a refund, but it's unlikely. The most probable outcome, if you do indeed mean movies, not TV shows or other videos, is that they would set up an additional download. For other content they'll probably just direct you to the same instructions on re-downloading I just posted.

  • My iPhoto icon has a cross over it, when i open it, it You have "iPhoto" 9.2.1. you can't use this with this version of OSX? it used to work ?what's gone wrong?

    my iPhoto icon has a cross over it, when i open it, it You have “iPhoto” 9.2.1. you can't use this with this version of OSX? it used to work ?what's gone wrong?

    iPhoto 9.2.3 is incompatible with MacOS 10.9.3 Mavericks. If you are running Mavericks on your system you need to update iPhoto to 9.5.1. Only, the problem is, that this version is no longer available at the App Store.
    The easiest way to get a compatible iPhoto version in that case would be to upgrade to Yosemite, MacOS X 10.10, and then download the most recent iPhoto version from the AppStore, iiPhoto 9.6, like LarryHN suggested.
    If you cannot download iPhoto after upgrading to iPhoto 9.6 post back.

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

    Fresh installation of Exchange Server 2013 on Windows Server 2012.
    Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
    your folders with your Outlook data file (.ost)" is displayed.
    If I turn off cached Exchange mode, setting the email account to not
    cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
    time.
    I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
    Microsoft Exchange RPC Client Access service is running.
    No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
    Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

    So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
    Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
    First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
    Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
    This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
    work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
    In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
    up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
    like OutlookAnywhere - which I might add had their place under that scenario.
    In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
    previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
    EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
    So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
    but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
    users.
    Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
    Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
    certificate.
    See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
    So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
    Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
    always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
    This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
    there is a 3rd - I forgot, but you get the idea).
    Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
    the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
    Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
    NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
    Open Outlook - BOOM! It works... Was it as good for you as it was for me?
    You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
    and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
    So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
    Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
    So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
    SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
    Frustrating beyond reason - that should be Exchange's new slogan...
    Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
    PS
    ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

  • Installing Discoverer with Database Version Oracle 10g Express Edition

    Hello,
    Is it possilbe to install Discoverer with database version Oracle 10g Express Edition? I have Oracle Fusion Middleware 11.1.1.1.0 on my Windows XP machine as well. If so, can someone please provide me a link to the Discoverer download.
    Regards,
    Kelly

    Note that the Personal Edition of the database is 'the most powerful' version, in that it contains all features and options of the Enterprise Edition (expect RAC and Enterprise Manager packs)
    As such, the Personal Edition, at a mere USD$400-500 is one of the most cost effective for-fee products that Oracle has in it's inventory. It is targeted at the developer. And it comes with the complete set of Sample Data, whereas XE has a very limited subset (since it does not support all functionality).
    Express Edition is indeed free, but it is not supported, and can not be patched. OTOH it does have a lighter footprint.
    Again, I am not sure whether Disco 11g is compatible with Express Edition. (It's on my schedule for December ...)

  • Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hi deamayfield,
    Thanks for visiting Apple Support Communities.
    If your Music app is unresponsive, try restarting/resetting your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Best,
    Jeremy

  • How can i import procedure with %ROWTYPE in Oracle 10.2 (paris) warehouse b

    Hello.
    How can i import procedure with %ROWTYPE in Oracle 10.2 (paris) warehouse builder?Everytime i try to do it i get an error message:
    API0411: Name should be an empty string.
    If i comment out %rowtype i can import it without problems.
    I have tried re-creating the procedure in OWB but once again i cannot find the %rowtype anywhere. the %type is there etc. I have tried to use Publish transformation / custom and cannot find %rowtypa there either.
    Thank you very much for your help

    Just in case you are having the same problem and cannot find any help anywhere - it is a bug in OWB.
    I got in touch with Oracle Support and it appears that it is possible to import procedure/package with %ROWTYPE inside it, but it is not possible if the %ROWTYPE is in the arguments.
    Just waiting for them to provide me with the bug ID.

  • When I open iTunes on my Macbook Pro, I am now getting a small window that says "Checking iTunes Library" with a pinwheel. This goes on for 5-10 minutes before I am able to access iTunes. Help! How do I fix this?

    When I open iTunes on my Macbook Pro, I am now getting a small window that says "Checking iTunes Library" with a pinwheel. This goes on for 5-10 minutes before I am able to access iTunes. Help! How do I fix this?

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

  • When I open my itunes it shows me two sides one is iTunesU and the other side is Podcasts and I can't connect with iTunes.How can I fix it

    When I open my itunes it shows me two sides one is iTunesU and the other side is Podcasts and I can't connect with iTunes.How can I fix it?

    Hi emzigal,
    Thank you for using Apple Support Communities. 
    Take a look at the following article to make sure that you are not missing any steps necessary for downloading past purchases. 
    Download past purchases - Apple Support
    Cheers,
    Jeff D. 

  • How to download / read  text attachment  in Sender Mail Adapter  IN XI

    Hi
    I would like to know how to download / read text attachment in sender mail Adapter & sent same attachment to target system using file adapter.
    Please help how to design / resolve this concept.
    Regards
    DSR

    I would like to know how to download / read text attachment in sender mail Adapter & sent same
    attachment to target system using file adapter.
    Take help from this blog:
    /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
    From the blog:
    However in most cases
    our message will not be a part of the e-mail's payload but will be sent as a file attachment.
    Can XI's mail adapter handle such scenarios? Sure it can but with a little help
    from the PayloadSwapBean adapter module
    Once your message (attachment) is read by the sender CC, you can perform the basic mapping requirement (if any) to convert the mail message fromat to the file format.....configure a receiver FILE CC and send the message...this should be the design...
    Regards,
    Abhishek.

  • How to open a pdf attachment in imac mail

    I am unable to open a PDF attachment in Mac Mail. There is not a PDF Icon in the email message. Is there a setting that should be checked?
    I have a new iMac (less than a month old) with Mountain Lion.
    Help would be greatly appreciated. Thanks

    It is an actual PDF that is an attachment to an email. There is not a link to click on to open the attachment.
    The attachment is a statement that I normally open, then print..
    What I am seeing on the monitor is the heading portion of the email with the statement image, all on one page..It prints exactly as seen on the screen.
    I have checked my Mail>Preferences>Viewing Tab."Display remote images in HTML" messages is checked..
    Thanks for the help.

  • When I send a text message to a friends phone I get a Not Delivered message but I can receive his message

    When I send a text message to a friends phone I get a Not Delivered message but I can receive his message

    Hello dgantz,
    The following article provides information and steps that can help get Messages working correctly.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Allen

  • I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

    I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

    Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

Maybe you are looking for