When I open CS4 is says print.ai unknown format
I try to open a file and it says the file format is unknown. I try to create a new file and it says that the print.ai file is an unknown format. Won't let me do anything. How do I fix it?
Your file associations got mucked up somehow. You may need to reinstall to force Windows to reset the registry.
Similar Messages
-
I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt -
hello..i use firefox 4 beta 05..my question is..why when i open let's say 6 tabs..my windows show that i have 6 instancies of firefox instead of one like it does with firefox 3.6? thanks
maybe i am saying it wrong..when i press alt+tab there is only one firefox open..but in windows 7 in the taskbar..every tab open..appears as another window openIf you are referring to taskbar previews, you can turn them off by modifying a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# In the filter box type '''previews'''
# Double-click on the preference browser.taskbar.previews.enable to change its value to '''false''' -
While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I have lightroom 5 and after I just tried to upload my wacom tablet 3 on laptop and, it's not compatable. I've tried to remove the Wacom program. Awindow box keeps apearing when I open lightroom it say tablet version mismatched and it completely closes my lightroom on me. What do I do??? I need my lightroom
Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn -
When I open iMovie, it says that quick time componets are missing, "Please re-install"...When I do that it says that ONLY 9 is supported and I have to have that first. What gives with that?
What version of iPhoto are you using?
This is the the first time I have ever launched it.
Does that mean there are no photos in the library? If so move it to the Trash bin in the Dock and launch iPhoto again.
If there are photos in the library do the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
and select the library you want to add from those in the selection window.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT -
I downloaded Creative Cloud and downloaded photoshop (64 bit) but when I opened photoshop it says that my trial has expired, and it was my first time opening it.
Adobe trial software expired early
Mylenium -
hi
Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
Could someone please help? It'd be VERY much appreciated. -
When i open iPhoto it says: "Caution: The iphoto library is locked, on a locked disk, or you do not have permission to make changes to it."
I have looked and i have read and write permission.
I don't know what else i can do.
I just got this computer, I was transferring pictures from my desktop folder (from my old PC) into iPhoto. It stopped importing, i had to force quit and now i get this message every time.
I click ok and iPhoto shuts down.
Any advice?
Thank youi had to force quit
The database may have been damaged when you did that.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Please help me how can i make my app store because when i open it it says cannot connect to iTunes please if you have any helpful solution inform me
Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset
Message was edited by: Diavonex -
I'm receiving a message when I open Safari that says my version is no longer supported(5.1.10) & I need to disable some browser extension. In Safari Extensions there are no extensions. What should I do? Thanks for your help.
I now use the TenFourFox browser on our remaining PowerPC Macs including a G4 PowerBook. Web sites see it as a newer version of FireFox tha and G4 can support and you get much better compatibility. Wikipedia info/history here:
http://en.wikipedia.org/wiki/TenFourFox
The TenFourFox official site and download is here:
http://www.floodgap.com/software/tenfourfox/
Downside: the last version of TFF that supports plug-ins was V17 so current versions won't play Flash animations. Even when TFF played Flash, the old G-series Mac processors were struggling with modern web video content, so you are not losing much.
If you must have smooth-playing web video, you'll need a new computer, as very little web video content is optimized for our PowerPC processors on old Macs. -
its my ipad 3 when i open appstore it says can not connect to app store and the same thing happens with itunes store?
1. Sign out of Apple ID and sign in again
2. Settings>General>Date & Time>Set Automatically>On -
I have just reformatted my drive and reinstalled creative cloud and lightroom. When i open it, it says there is another version running the catalog and i have to switch to it to fix the problem, but there is no other version on my computer. Does anyone know how to fix this?
Where did you put the LR catalog?
Did you install the same version of LR, which one?
OS and version?
Open the folder where the catalog (*.lrcat) is located. If you see a file with lock in it while LR is not running, delete it.
Now try to start LR again. -
When I open Itunes, It says I don't have enough access privileges for this operation, any suggestions.
If u find out let me know cause i have the same problem happened about 2 weeks ago
-
WHEN I OPEN IDVD IT SAYS YOU CANNOT USE THIS VERSION OF IDVD WITH THIS VERSION OF MAC OXS. WHAT DO I NEED TO DO TO GET IDVD WORKING?
First off, please don't use all caps! It's considered to be yelling.
I need to know more about your system and software.
How old is your Mac Pro? what Mac OS version came with it when it was new? What version of iDVD are you trying to use?
Maybe you are looking for
-
IPhone won't sync/mount in iTunes
I just noticed that my iPhone won't mount in iTunes. The iPhone makes the "i'm plugged in and charging" noise and shows the charging screen but never goes into sync mode. I've rebooted the phone, laptop, and even tried two other cables still to no av
-
0pp_c15 activation error - Field /BI0/ACOPC_O0100 is unknown
hi, There is an error occured while activating the cube 0PP_C15 - Backlogged production orders.Transformation 0PP_C15 80PP_DS01 is not active . The following error shown in its transfer routine while trying to activate the transformation. E:Field "/B
-
Help on accessing tables in Java available in SAP system
Hi All A day before I had posted a question regarding the accessing of tables available in SAP R/3 system in my Java code. I got the following code as reply. This code is working fine. But in the below example, the QUERY_TABLE IS BSAUTHORS. In my cas
-
I am using function module ALV. I need a add a box on the side which comes in ALV. Second i need to control it such that the person can either select one record or mutilple. I know for getting the box there is a field in the layout. Help in this rega
-
I have an iPad 2 w/wi-fi, 16 GB. I would like to update my software version from 4.3 to a later versionn; however, when I go into Settings, General, the "Software Update" option is not there???