When i open i-photo, it goes straight to browsing, and won't stop

i photo, when i open it goes to browsing (spinning circle) and it won't go any further than this,?

Okay this is really really important.
It's a list - think of it this way, it's the answer to a question: "What images are on my computer"
The thing about deleting things from there is that you don't know the importance of whatever it is you're trashing. So, really, don't do that. No, really.
Once the photos are in iPhoto you can delete them - but go to the location where you have them stored and delete them from there. That way you won't do any damage...
Regards
TD

Similar Messages

  • My iphoto will not load, all it does when i open it is just show a blank iphoto and won't load any of my photos that were already in there.

    My iphoto will not load, all it does when i open it is just show a blank iphoto and won't load any of my photos that were already in there. Any way to fix it ?

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • When I take a photo it goes to camera roll and my photo stream. This doubles the memory being used. Can I delete the camera roll?

    When I take a photo it goes to camera roll and my photo stream. This doubles the memory being used. Can I delete the camera roll? This seems pointless to have the same pictures twice. My Photo Stream pictures upload to my PC, so why should I have the same photos in Camera Roll?
    Am I supposed to delete pictures in camera roll after they go into My Photo Stream? Why can't I just take a picture and it go to photo stream on its own? My camera roll AND My Photo Stream go back to March 11, 2014

    You're misinformed and have asked several questions that I'll try to tackle.
    No it doesn't double the memory. The Photo Stream image is simply a pointer to what you have in your camera roll.
    If you delete pictures from your camera roll, leaving them only in Photo Stream, you will lose those images forever if you don't then pull them out of Photo Stream on another connected device. Photo Stream is meant to be TEMPORARY cloud storage for your images. Read about it here: iCloud: My Photo Stream FAQ
    You should ALWAYS offload your images if you want to keep them. See how to do that here: iOS: Import personal photos and videos from iOS devices to your computer

  • When I email a photo it goes to my Outbox and stays there never getting sent.

    When I select a photo and click Email Photo i fill in the email address and subjet and click send.
    The email goes to my Outbox and just stays there and does not get sent.
    Do I have some settin set wrong or what.

    Yes I can send other emails without attachments. If I send another email with Pic it will also go the the outbox and stay there until I delete them.
    I rebooted like you said and the email was sent with the attachment and I recieved it on at my other email address.
    I then went back to my Photos and selected another Pic and emailed it out and it seams to work again.
    Do we need to reboot the Ipad ocassionally?
    Thanks for your help.

  • To copy an arrangement section - verse, chorus etc - I click the verse or chorus I want to copy/move in the arrangement line. But when I open edit the copy/cut options are gray and won't let me do it. Same w/command 'C'

    To copy an arrangement section - verse, chorus etc - I click the verse or chorus I want to copy/move in the arrangement line. But when I open the edit tab the copy/cut options are gray and won't let me do it. Same w/command 'C' and 'V'.
    Also, how do I send a song from my MacBook GB to my iPad GB so I can utilize the Smart Instruments in my song.

    Use the alt key to create a copy of an Arrange section by dragging it.

  • Can't read my AOL mail ? When I open a email it goes straight to Bing search..... Help

    when i click on email. It opens as to read then clears and Bing Search comes up

    They are the same use your email address as your userid so it will know for instance whether it is MSN or HOTMAIL. I think that change was made a few years ago, yes when I went to Verizon DSL and then Verizon FiOs (Fiber).

  • My music tab won't let me browse through my playlists. When I open the tab, it shows a random song and won't let me look through my songs. What is wrong?

    My music tab won't let me browse through my playlists and songs. Every time I open it on my iPod it only shows the same song 'playing' onthe screen. I can still play other songs by randomely pressing my pause button. What is wrong with it? And how can I fix this?

    Whenever you open your music, you will be routed directly to the last song you were playing. You can tap on playlists or other options to check on your song lists.

  • How do I change the default from CS6 to Photoshop CC when I open a photo from Bridge CC?

    How do I change the default from CS6 to Photoshop CC when I open a photo from Bridge CC?

    Thank you. That works when I double click a RAW image, (opens in ACR then when I open from there it goes to CC)  but when I double click a jpg it goes straight to CS6. I'm hoping there is a way to change the default, but haven't found yet. I don't want to remove CS6.

  • I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now.  When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can a

    I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now.  When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can anyone help me please as I have several photos to edit before the end of this month. Many thanks for any help

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • I have all my photos both in the photo library by date and as events . When I open I-photo in either format there are just empty rectangles with names. If I click the photo appears. This was not like this before. How can I get it back so that I can see th

    I have all my photos organized in i-photo as both photos and events. When I opened in the past the images in each event or album appeared as icons on the sreen. Now when I open I only get a dotted line rectangle and only if I click I see the picture, which is really problematic when trying to see or select nay image.
    I don't know if mistakenly I did something with the settings although I couls not find anything in preferences or any of the menus that could relate to this.

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto thumbnails - this may take several tries
    Also what version of iPhoto? What recently changed?
    LN

  • When i open my computer the login page comes up and then goes dark right away.  i have to shut down and turn on to get to work.  just a month old mbp 15.  just started it today.  any suggestions.  software says it is up to date.

    when i open up computer the login screen comes up and then goes dark right away.  can't do anything with it.  close lid and open up and it comes up again and then goes dark.  i have to shut off and restart to get through the login page.  then seems to work untill i close lid again.  just started this today.  software is up to date.  using a month old mbp 15.  any suggestions?  thanks.

    You could try wiping the hard drive and reinstalling the OS and all your programs.
    Did you install any programs yesterday?
    If not it may be best to take it to an Apple care center and have it checked out. Take it in while it is asleep so you ccan show then what is happening.

  • Hello, I have a Windows 7 Pc where Lightroom 5 is on installed.  When I open a photo using " verkenner" I see a good coloured photo.  When I open a photo via Lightroom 5, the photo will be too dark. This gives difficluties during shaping the photograph. C

    Hello,
    I have a Windows 7 Pc where Lightroom 5 is on installed.
    When I open a photo using " verkenner" I see a good coloured photo.
    When I open a photo via Lightroom 5, the photo will be too dark. This gives difficulties during shaping the photograph. Can someone help me to solve this problem?
    Kind Regards,
    Marianne

    Into the Develop module Not all the sliders in the Basic Panel are at 0.
    Temperature ° is on 5600
    Colourtint is on + 30
    Balans: slider in the middle
    History panel:
    Balans gespitste tinten -3   0
    Balans gespitste tinten -3   3

  • Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

    Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

    Hi Nealeh
    Thanks i think I got it working of a fashion.
    Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
    Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
    Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
    The scenario is:-  say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
    Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
    So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
    Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
    She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
    Had she had a normal skimpy bikini on, no problem!
    If i don't solve it, she will get fired!
    Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
    "Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
    I have Safari on this iPad. Guess that is all it runs.
    So technology is not my friend today!

  • When i open firefox it instantly goes to the bottom of the page then opens a new one. i cant close the pages down the bottom and they are running in the background slowly everything down

    when i open firefox it immediately goes to the bottom tool bar and keeps running. a new home page then opens and i cant close the one at the bottom because there is no icon. these hidden pages keep playing old youtube song and another one with adds running. how do i close these pages please? also if i minimise firefox to go onto say, email, i cant retrieve it and have to then open another home page. argggghhhhhhhh. help please. thanks and have a great, 'quiet' day. beth

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How can I see all photo miniatures when I open a photo album or an event in iphoto?

    How can I see all photo miniatures when I open a photo album or an event in iphoto?

    Note the zoom slider at the bottom of th iPhoto Window - drag it left.

Maybe you are looking for

  • Is LiveCycle the product for me?

    Afternoon Hope everybody is well My organisation is currently rolling out SAP business by design however is beginning to struggle with data input and amendments to SKU's (Products, cost, retails, etc). At present done through a spreadsheet and keyed

  • Business Process Management use cases within an SAP Environment

    Check out the [BPM use case wiki |http://wiki.sdn.sap.com/wiki/display/BPX/BusinessProcessManagementUseCases]to learn how many SAP customers are profoundly transforming their companies by leveraging the discipline of Business Process Management to op

  • J2sdk 1.4.2_04 NoClass DefFoundError

    Hi, This is a common error for many people but I still could not find a solution. I installed a J2SDK1.4.2_04 on XP. Then it created 2 directories: c:/j2sdk1.4.2_04 (all java tools in bin are inside) c:/Program Files/Java/j2re1.4.2_04 (librarys inclu

  • API for Kernel in SAP

    Hello everybody, 1] Can someone please help me to know which Application Progamming Interface is used to interact or link the Kernel in SAP and Kernel in Windows 2003 Server. 2]Also I wanted to know which specific cross client objects and client inde

  • Pt:tree of community groups and users

    I am creating a community emailer portlet for emailing the users of a community. I want to use a pt:tree that lists the groups and users who have membership in the community. I want the individual users, groups and users in groups to be checkable. I'