When I open itunes, itunes could not connect to the itunes store with unknown error code Ox80090318 although I am connected to internet

My Windows 8.1 laptop is connected with internet. However, when I open itunes, I got the message:
itunes could not connect to the itunes store. An unknow error occurred (Ox80090318). Make sure your network connection is active and try again.
No matter how I try, the message keeps on coming back and itunes will not connect itune store.
Can someone tell me why please.

Hello yukgmn,
To troubleshoot the error 0x80090318 in the iTunes Store, please follow the steps in the article linked to below.
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Similar Messages

  • Itunes could not back up the iPhone because an unknown error occurred

    I am trying to update my Iphone 3GS to the 4.01 update, but I keep getting this error: "Itunes could not back up the iPhone because an unknown error occurred" Then Itunes tells me to reconnect my Iphone and try again, I do so...and I retry the update and I get the same error over and over again. What do I do? I can't update my phone...

    Nevermind, I misread.
    Message was edited by: Melissimo

  • Cannot connect to the Music Store.  Unknown error (502).

    When I attempt to access the iTunes Music Store I get the following message:
    "iTunes could not connect to the Music Store. An unknown error occurred (502).
    Make sure your network connection is active and try again."
    Well...
    (1) My network connection is active
    (2) I have "tried again"
    (3) I have updated my iTunes software
    (4) I have reinstalled the updated software
    (5) I have run msconfig and tweaked my settings
    (6) I e-mailed Apple support and got a return e-mail that explained the my problem had been fixed
    (7) The problem has not been fixed.
    If anyone has any help it would be greatly appreciated.
    Thanks

    I am having the same problem. I tried re-installing the software. I did find this on the website under support:
    If you upgraded to Windows XP Service Pack 2:
    Windows XP Service Pack 2, by default, enables the Windows Firewall. As with a third-party firewall, you will need to configure Windows Firewall to allow iTunes to access the Music Store. Read this document for more information. If you have further questions about configuring the Windows Firewall, contact Microsoft's Service Pack 2 hotline at (888) SP2-HELP.
    I'm going to call them to see if they have a solution.

  • ITunes could not copy "" to the iPhone "" because an unknown error occorred (-50).

    This is a very annoying problem. I've followed everything by the books and cannot figure it out.
    I'm getting the warning     iTunes could not copy "[Song Name]" to the iPhone "[Phone Name]" because an unknown error occorred (-50)   and don't know what to do. I've followed Apple's guildline - http://support.apple.com/kb/ts1539 - of uninstalling, reinstalling, reregistering .dll files, restoring the phone, updating the phone, making sure the "Convert higher bit rate songs to 128 kbps AAC" option was not checked, etc. Does any body have any idea what the issue is here? I just did all of this after updating iTunes to 10.4 and my iPhone 4 to 4.3.4 and am running Windows XP. I've had the issue for about 3 weeks - it occured both after reformatting my PC's hard drive and installing iTunes 10.3 (I know others had issues with 10.3). ANY help would be amazing. Thank you!

    Hey Edward,
    This is most likely a USB speed or connection issue. Make sure the iPhone is directly connected to a USB 2.0 port.
    To find out if your computer has USB 2.0, enter your computers serial number on this web page: http://support.apple.com/specs/
    This article has more connection tips:
    http://docs.info.apple.com/article.html?artnum=307091
    Jason
    Message was edited by: Jason L

  • Could not fully start the application because an unknown error occured

    I'm using photoshop 7.0 and my problem occurs with Imageready. I am using Vista, but this has not been a problem for the past year (so I don't think it's Vista related).
    I recently created an animation in Imageready and it worked just fine. However, when I returned to use Imageready again, I received the error listed above.
    Reinstalling does not resolve this problem. If I do a system restore, I am able to use Imageready again. . . but only one time. after which the same error occurs.
    Anyone got any ideas?
    Thanks,
    John

    Any securtity tools or specific Windows updates? Something is most likely suppressing the app. Also check the properties of the executable for ImageReady. It's possible something has reset security permissions or activated DEP for it. Run it in compatibility mode, if need be...
    Mylenium

  • ITunes could not connect to the iPhone because an unknown error occurred (OxE8000001)

    Sorry if this has been answered elsewhere but I don't have the nerves to read through thousands of "I've got the same problem too" replies. I do not care whether anyone has the same problem. So if you don't have any solution do not post! I'm not being rude, I'd just keep this discussion as accessible for other readers as possible. Besides, shouting "me too" doesn't really help anyone. Thank you.
    Here's my problem, I sync my iPhone via iTunes 10.5.2, which works fine but after a while it prompts with an error message "iTunes could not connect to the iPhone because an unknown error occurred (OxE8000001)". This error message will not disappear and I have to force shut-down iTunes. It works OK for a while after re-start but the error comes back after a while. It is a very annoying little problem because I was waiting for WIFI syncing for so long and now it doesn't work properly
    Any ideas how to remedy this?

    Did you try the solutions mentioned in this article? iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • TS3297 I keep getting an error when trying to add songs to the iCloud. Error reads: "We could not complete your iTunes_Store request. An unknown error occurred (4002)" I have tried to completely delete iTunes and reinstall but still getting error.

    I keep trying to download songs to ICloud but keep getting an error: "We could not complete your itunes_store request. An unknown error occurred(4002)"
    I have deleted itunes and reinstalled but continue to get error. Want else can I do?

    Thanks jdnjo.  Your fix also worked in Windows 8!

  • ITunes could not update this iPhone because of an unknown error occurrence (24)

    Type Phone iPhone 4g cdma
    Please, help
    When I update my phone show me this letter: ITunes could not update this iPhone because of an unknown error occurrence (24)

    I don't think that's an iTunes error code; sounds like a Windows one: http://support.microsoft.com/kb/310123
    I would remove iTunes and all its components completely, reinstall, and try again. Try on another computer if you can also.
    Remove & reinstall iTunes: http://support.apple.com/en-us/HT1923
    ~Lyssa

  • HT201210 During the restore I get almost at the end the message that iTunes could not restore my iPhone due to an unknown error (1). Can someone help?

    During the restore from iTunes I get, almost at the end of the restore, the message that iTunes could not restore my iPhone due to an unknown error (1). Can someone help?

    error 1 means hardware failure.
    Is your phone jailbroken?

  • ITunes is not letting me download certain songs. Keeps saying "Could not purchase "name of song." An unknown error occured (5002). It let me buy 1 song, afterwards it didn't let me buy any. I checked my credit card info, and it's still not working. Help!

    iTunes is not letting me download certain songs from  my phone or my computer. Keeps saying "Could not purchase "name of song." An unknown error occured (5002). It let me buy 1 song, afterwards it didn't let me buy any. I checked my credit card info, and my password is correct. and it's still not working. Help Please!

    I'm having the same problem on iPhone 5 and iPad.

  • I keep getting the error:  "lightroom could not import this catalog because of an unknown error" when trying to import from a catalog?

    I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
    I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!! 
    I then tried exporting the needed photos to a new Catalog and that worked.  But then when I try to import them again from my Master *+ Catalog I get the same error again!!
    I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
    Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

    This is a duplicate thread - see here

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • How to solve the error:  "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

    I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
    I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!! 
    Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

    OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
    If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
    If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
    So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
    John

  • Lightroom could not import this catalog because of an unknown error.

    OS 10.5.8
    (gb mem
    I have recently exported a catalog from my main database (on a mac) with about 700 photos.  Including negative  files
    We opened the catalog on a PC machine in the same version of lightroom. 3.5 camera raw 6.5.  The images were given new keywords and then exported as a Catalog  including Negative files.
    The original catalog has been deleted from the main database on the Mac.
    The  Catalog with the new keywords  saved across the network to the Mac.
    Permissions are open to everyone on the folder the Catalog is in.
    When I try and import the catalog in lightroom I can see the thumbnails, 
    However get this message. I’ve lost many hours trying to get the catalog bak into the main library.
    I can open the catalog on its own in  Lightroom, just when I try and import the catalog  I get the bellow message.
    I’ve tried importing saving to a new location
    Importing not moving the files
    Lightroom could not import this catalog because of an unknown error.
    I see others have had similar problems however do not see a clear answer.
    Has anybody a solution?
    Thanks Patrick

    I'm having this issue as well, and honestly I've *never* been able to get "import from catalog" to work. In my case I have a catalog created on my Windows 7 laptop in LR3.5. I've copied it to an external drive, plugged it into my PC running Windows 7 with LR3.5. And I get the "could not import this catalog because of an unknown error" message.
    I've confirmed every image in the catalog I am trying to import is accounted for and isn't "missing". There are no duplicate images between the exported catalog and the one I'm trying to import in.
    Thoughts?
    Neil

Maybe you are looking for