When I open my Airport Utility I don't always see the airport come up, even though Timeport is backing up AND I can see the time capsule in Finder.
Version 5.5.2 (552.11). Updates tells me this is the up to date version, however I keep seeing a window asking me to update to 5.5.3. I try this and normally receive 'software is up to date'. Today something downloaded but I cannot remember what.
Also, when opening up Airport Utility I don't always get to find the airport extreme. Sometimes I do. Every time I try I am also able to carry out a backup using timemachine and can also see the drive on Finder.
In addition,
I have a 1TB drive hooked up to the USB port. I cannot see it in finder even though I seem to be able to see Time Machine Backups under 'Devices',
I cannot find a way to access the 1TB drive. I have hooked it to a local USB on my Macbook Pro and it works fine.
Just bought my Time Capsule today and had the same issue, or actually I did see it at first then allowed some software updates but after I restarted my computer, Airport Utility no longer recognized it. Solution: I had to reset my TC to factory settings by pushing the end of a pin into the Reset button (tiny hole in the back of your TC) and holding a few seconds until the amber light starts flashing rapidly. After that try the Airport Utility again and this worked for me. Good luck!
Similar Messages
-
When reading a web page, I will right-click on a link and select 'open link in new tab' and most of the time it will open the new page right at the bottom. I then have to scroll up with the mouse or hit the 'home' button on my keyboard to get back to the top of the page. I've already looked at the tab settings in the options menu, and there's nothing there that seems to apply.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox -
I have Windows OS. I downloaded Firefox yesterday. Every time I open the Firefox browser, it starts in safe mode. I have restarted my machine several times -- Firefox still starts in Safe Mode. My favorites from IE copied to Firefox fine, and Firefox is now my default browser...it just keeps opening in Safe Mode.
I downloaded the toolbar. When I was done using the computer, I put it to "sleep." The next time I "woke" the computer and went to Firefox, the toolbar was gone. When I downloaded the toolbar again, I got a box in the upper left hand corner of the screen stating Firefox BLOCKED the toolbar, and did I want to allow it. There was NO option to allow always-it's just a one time deal. When I shut down for the day, I expected it to remain, but no-next time I fired up firefox, NO TOOLBAR. I pulled up Inbox dollars again, clicked on download toolbar, got the box stating it's blocking the toolbar, etc, etc, etc. Unless Firefox upgrades daily, or in some cases, several times in one day, I'm going to stick with my description that the toolbar magically disappears EVERY TIME I OPEN
FIREFOX!!!
I don't profess to be any type of computer whiz, I'm totally self-taught, and it's not beyond the realm of possibility that I'm doing something wrong. I've been using Firefox for about a week, so I'd welcome any help! -
I had a Time Capsule running in an AV Cabinet and it made too much noise as it backed up and ruined soft/quiet music passages (and created far too much warmth as well). So, I visited the local Apple store and the guy I met worked through a few solutions with me. I decided on an Airport Extreme for the audio cabinet, and would move the Time Capsule to another room where it would not create noise interference.
So, I have the Airport up and running perfectly well. I changed my wireless network name and password.
I cannot get the Airport Express and Time Capsule to show up on my network. They both just blink that brown/orange color on the front. When I go to the Airport Utility, it does not pick up the Time Capsule or Airport Express. I have tried unplugging and plugging back in and scanning for devices, but dont know what else to do. Are they still looking for my old network? Is there a way to reset them??
Thanks for any help.I've tried the option key on both--the AEBS offers 14 options, including Automatic, while the TC offers 8 options, and no Automatic. The AEBS lists (among others) 802.11 a/n-b/g compatible, 802.11 a-b/g compatible, or 802.11 n (5 GHz)-b/g compatible. The TC offers 802.11.n (b/g compatible), 802.11n only (2.4 GHz), and 802.11n only (5 GHz), among others...
I had already followed the instructions in the link you supplied, except that the wireless options don't quite match...
I am currently trying 802.11n (5GHz)-b/g compatible on the AEBS and 802.11 (5GHz) on the TC, which gives me a rate of 270 on my n devices and 54 on my g devices, according to the Airport Utility.
This might be the best I can do, without buying a new TC. Thanks for any advice you can give...
C. -
Connecting External Hard Drive to Time Capsule - In Finder but not Disk Utility
Hi,
So I've got a bit of a problem. I have connected my LaCie 2d Quadra External Hard Drive into my Time Capsule via USB for the simple purpose of making it wireless, as well as allowing both my husband and I to access the files on it. It works flawlessly on my husband's MacBook Pro: Shows up as an icon on the desktop as well as in Finder and Disk Utility. However, on mine I can access it via the Time Capsule in Finder (as a shared file), but it does not show up in Disk Utility nor on the Desktop. I tried installing the LaCie Desktop Manager, but, although it downloaded and installed fine, when I went to open it I received the error: "No LaCie Desktop Manager Compliant Device Found". I am assuming that is because it really is only even recognizing it at all in the Finder because it is a shared file, but not actually recognized as a Drive. And that explains why it is not on the Desktop or Disk Utility. Annoyingly, I can't drag the shared file onto my desktop either. Well I can, as an alias, but it says original not found when I try to access it.
Obviously, I would like to access the LaCie drive on my desktop wirelessly as my husband does, the way it does when I plug it in directly. If I connect it via USB directly into my MacBook, it works fine. So really it is just a matter of getting it up and running wirelessly, which I know it can do because it is doing it on my husband's. I am wondering if it is a Lion issue, as I am running Lion and my husband is running Snow Leopard? But then again...it does work with my Lion if I plug it in directly...sigh...
Here are our details:
Me: 2008 MacBook, running Lion
Hubby: 2008 MacBook Pro, running Snow Leopard
Any help would be greatly appreciated...I'm bewildered!On your Lion MacBook, click anywhere on the open desktop so that the Finder menus are displayed at the top of the screen.
Click Finder, then click Finder Preferences, then click the General tab
Under the heading of "Display these items on the desktop" make sure that there is a check mark in the box next to "Connected Servers"
Close Finder Preferences
Open Macintosh HD or the Finder
Look to see if the Time Capsule icon is displayed under the SHARED heading in the Finder
Click on the Time Capsule icon and folders representing the Time Capsule disk and your Lacie disk should appear to the right
Double click on the Lacie folder to mount the drive on the desktop
You may need to click Connect As at the upper right of the center window if your disk requires a password. Once the password is saved, you should not have to enter the password in the future. -
My folders that my message rules on iCloud divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder individually for it to update. A real pain as I have about 30 folders. Is there a way around this ? The folders update on my mac fine when i check mail without having to select each one of them. Can the iPad and iPhone do the same thing?
My Mac has 4 mail accounts coming into it, but you are correct, one of them is a POP account, (and unfortunately it is the main @ account, and is the one associated with my apple id, since we've had it for years). I couldn't figure out how to replace this with the Imap version, short of deleting that account entirely.
Is this what I have to do?
Thanks for your help! -
When I open Itunes, It says I don't have enough access privileges for this operation, any suggestions.
If u find out let me know cause i have the same problem happened about 2 weeks ago
-
I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter). I've downloaded and run airport utility, but it seems to have a hard time finding the time capsule...maybe one out of 10 times it will find it.
What's more, when I look under network infrastructure under the control panel, it shows my Broadcom ADSL centurylink Router...so I'm wondering if my modem/router combo is overriding the router function on my timecapsule and the time capsule is not being used as a router...
Any help much appreciated!In this case the TC should be in bridge mode.
Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
Also make sure the windows is set to home, not work or public.. even turn off the firewall.
Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
\\TCIPadderss. -
How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.
The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network. -
How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls. -
New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]] -
My AirPort Utility CAN see the time capsule...
But for some reason I can't access it. I don't see the Z drive in "My Computer". I'm on Windows Vista, and I used to be able to see it, but I can't anymore! The time capsule was unplugged for a while, otherwise I am not sure what happened. Even when I plug my computer into the time capsule directly, it doesn't "see" it as a drive. Help please!! Thank you!
Open a command prompt and ping the TC.
Use windows explorer and type the IPof the TC directly into the address bar.
\\TCIPaddress
The actual IP of course.. not the words above. .ie \\10.0.1.1
If that fails then the issue is vista has moved to work or public.. move it back to home area.. and turn off the firewall. -
HT3728 airport utility does not see my time capsule
I got a Time Capsule for Christmas, have hooked it up, turned it on, then the Airport Utility. The airport utility has not found it - I have reset it using the button on the back several times and still nothing. I have also restarted my computer, which is a new macbook pro, but nothing.
Advice please! I am new to Mac and am quite frustrated, considering returning the Time Capsule, if I can ...That was not helpful of Apple at all, as this is a much trickier setup..
I have just posted details in another thread. Longish post I am not sure how to reference a particular post.
https://discussions.apple.com/thread/3528704?tstart=0
Please follow those instructions to load 5.6 airport utility.. as you will find it much better.
In your case you will need to do the same thing but on the airport setup.. which is another layer in to ethernet.
But the idea is the same.. do not use automatic setup of the wireless IP settings.. you need to do it manually but it is relatively easy. Again you need to make sure your ISP is not using a 10.x.x.x address as many do.. the cheap skates are saving IP addresses. If they do that you will need to use manual setup of the TC as well.
You will still want to do the setup of the TC by ethernet.. but can use wireless once it is done.
Exactly as in the other thread, go to airport in network preference and go to the airport setup, then fix the IP address as I have shown.
If you need more info try to ask specific questions .. screenshots also help. -
I was just wondering if anyone can provide me with instructions please on how to set up remote access via the internet to the time capsule when away from home?
I am running OS X Mountain Lion operating system and have Airport Utility 6.1.
Many thanks to you all for your help.I think the instructions should be all in BTMM with iCloud.
Instructions are all there.
http://support.apple.com/kb/ht3486 -
I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.
Your pro doesn't matter.. I presume it is happily working.
Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
This is the most relevant I think. http://pondini.org/TM/B6.html
But look at the whole section B setup problems.
http://pondini.org/TM/Troubleshooting.html
If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
See if you can get Pondini to respond.. !!
Maybe you are looking for
-
How to connect my Macbook Pro to HDTV Polaroid with Audio
I connect my cable mini dvi in my macbook pro to my screen Polaroid 40 "I have video but I have not audio, and I went to the System Preferences menu to change the audio output and can not hear anything on the screen thanks
-
Anybody know how to read "xerces"?? and a lot more......
And, what's the relationship between xerces and sun's JAXP? Is jaxp more a interface less an implementation? I found jaxp calls some part of xerces pack. Meanwhile, in xerces pack there sits a jaxp pack. Xerces say it support jaxp, so, is that mean x
-
Event created on iPhone does not appear in iCal
When I create an event on my phone and sync, it does not appear in iCal. Events created on my laptop sync without issue. Contacts sync both ways, but calendar events do not go from the phone to the computer. I am not using MobileMe to sync, simply us
-
" Internal error: 500" during line item configuration
We are using IPC with some interface customization and copying by reference. During line item configuration I've been getting an Internal error: 500 "Internal error: 500 - The item com.sap.spc.remote.client.object.IPCItemReference@3e902a could not be
-
IPod is corrupted and I cannot restore it
I message pops up into the iTunes written that my iPod is corrupted and I am supposed to restore it. While doing so it never finishes becasue another message appears saying my iPod cannot be written off! Would somebody have any tip to solve it? Thank