When I open my browser, the web page area is completely black and the menu area is empty, how can I fix this?

When I open firefox, nothing shows up but an empty browser. The web area is completely black and if I right click to open up the little menu, that is also black. The top of the browser is empty and none of the menu buttons appear, none of my bookmarks appear, and none of the search bars or anything appear. Firefox was working fine and then the next time I started my laptop up this is what I experienced. There is absolutely nothing I can do in Firefox. If I right click the top menu area, the smaller menu is completely black but if I click around in it I can see it adding and removing my toolbars and such but I still cannot see anything besides black space and empty space.

hello, other users with this problem all had an embedded intel hd graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem.
* Intel HD 2000/3000: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64bit)
* Intel HD 4000: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24329 (for win7 64bit)
<sup>[http://www.intel.com/support/graphics/sb/cs-009482.htm Intel guide to find out which model you're using]</sup>
in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Similar Messages

  • TS2580 When I go to update my web page I am asked for a Password, which I have forgotten how can I reset this.

    Since the cahnge over from Mobile Me to Icloud I am asked for a Password which I do not know how can I reset this. Amelia

    Without or without a password, you CANNOT publish to iCloud.
    MobileMe went offline in June last year. You received reminders in the mail.
    You have to find another webhost.
    Browse this forum, since it has been discussed several times a day every day for the past two years since it was announced.
    Or wait for these answers to be delivered.
    Anyway, your password is in the keychain.app .
    And it is probably the same one you used to login here to post your message.

  • Hello, I was going to have my presentation on my macbook air. But when I putted it up on the big screen it wasn't a normal presentation. There was two pages at the time and a timer came up. How can I fix this as fast as posible? Thank's in advance.

    Hello, I was going to have my presentation on my MacBook Air. But when I putted it up on the big screen it wasn't a normal presentation. There was two pages at the time and a timer came up. How can I fix this as fast as posible? Thank's in advance.

    Your MacBook is using the big screen as the Presenter Display, and the MacBook Air display as the Show display. Tap the 'x' key to swap them during the show.
    Here is more information about using the Presenter Display.

  • HT1725 I'm updating my OS and I paused it for a while then turned my PC off then when I opened it again the download was gone. How can I retrieve it?

    I'm updating my OS and I paused it for a while then turned my PC off then when I opened it again the download was gone. How can I retrieve it?

    "I'm updating my OS"
    Which OS?
    "and I paused it for a while then turned my PC off"
    Why?
    Just let it complete the download.
    "then when I opened it again the download was gone. How can I retrieve it?"
    If you mean iOS, select the iOS device in iTunes then click Update.

  • I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

    I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
    I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

    On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
    But there is a plugin for ID that makes this possible. Never tried it myself.
    https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

  • I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

    I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

    Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

  • My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

    My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

    Hello Kierasully,
    I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/en-us/ts2570
    Regards,
    -Norm G. 

  • I recently had to disable and enable all add-ons on Firefox. Now when I google something, when I hover over the website preview and click 'cached' it won't highlight the key terms anymore. How can I fix this?

    I recently had to disable and enable all add-ons on Firefox. Now when I google something, when I hover over the website preview and click 'cached' it won't highlight the key terms anymore. How can I fix this?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • When I try to save a document a message comes up saying "Couldn't auto-save document." How can I fix this? Thank you for your help!

    When I try to save a document a message comes up saying "Couldn't auto-save document." How can I fix this? Thank you for your help! - Chip

    This is a mean one. I don't have time to try and find the cause, but at least some answers to your questions, to hopefully shed some more light on this.
    Where was the original destination? iCloud folder.
    On another drive? Tried to Save as... to Hard Drive (also changing name of file), always get the same non-descript short Error "Couldn't auto-save document." (slides down from top with a yellow warning triangle). Status to the right of document name is "Not Saved".
    Another Server? No access at this time.
    I also tried File, Revert to, Browse all versions, to check what I'd be losing. Saw I wasn't losing much and selected the last version and pressed Restore - same error. In the end I just quit Pages and re-opened. The document opened with the last few edits missing (but with the status "Edited" next to the name). I re-edited and could save. Good old habit of saving often.

  • ICloud does not transfer files, contacts, Pages, etc to my iPad and Mac Computer from my iPhone How can I correct this problem

    icloud suddenly stopped transferring files approximately 48 hours ago and that includes, contacts, Pages, etc to my iPad and Mac Computer from my iPhone How can I correct this problem?  prior to that I had no problems with icloud transfers. what suggestions are there to remedy this problem?.

    On your iPad and iPhone tap Settigs > iCloud
    Switch Documents & Data off then back on. Do the same for Contacts.
    On your Mac open System Preferences > iCloud
    Deselect the box next to Documents & Data, same for Contacts then reselect both boxes then restart your Mac.

  • I have a bar of disrupted bar across the top of my screen, How can I fix this?

    I have a bar of disrupted bar across the top of my screen, How can I fix this?  I have a Macbook air, and this appeared yesterday, and didn't go away when I powered off.  It looks liek little verticle multicolored lines about 1cm in length.
    Thanks!
    Tanya

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • Since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

    since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

    A Davey1 wrote:
    Not a nice answer!
    Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
    You're ignoring context.  On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers.  The new Apple Support Communities made things worse by introducing certain inefficiencies.  Then came Lion.  The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest.  (2) When applicable, give a brief answer such as the one that you found objectionable.  (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
    People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems.  I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there.  Even doing that, what I posted saved me time that I could use to help someone else.
    The people helping here are all volunteers.  None of them is being paid for the time they spend here.  They all have a life outside of Apple Support Communities.  It's arrogant of you to demand that people helping here spend more time than they already do.

  • My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help.  If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
    The black dot problem may mean you need to reset your iPod.  If that does not help, it may need service by an Apple Authorized Service Provider.
    If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
      http://www.apple.com/support/ipodtouch/
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • When I do a google search, why all off a sudden is it sending me to Bing? How can I fix this?

    When I do a google search, why all off a sudden is it sending me to Bing? How can I fix this?

    Because you selected Bing? Check, click & hold the triangle, and select Google.

  • I have a 2nd generation iPod....I have switch on the OFF position and it will periodically turn on (thus draining the battery) by itself.  How can I fix this?

    I have a 2nd generation iPod shuffle.  Recently, after I turn switch to OFF position, it will turn on (green light flicks on) by itself periodically and obviously battery gets drained.  How can I fix this?

    I don't know of a way to fix an issue with the switch, if it's a hardware issue.  You can try doing a Restore on the shuffle in iTunes, to see if there's some software glitch.
    However, I often leave my shuffle with the power swtich in the ON position.  When you are not playing music, the shuffle goes into a "sleep" mode after about a minute.  You'll notice that you need to press the Play button twice to get it to play again; the first press wakes it up.  In my day-to-day experience, I don't notice any difference in battery life between the shuffle being OFF and ON (and not playing), even if I leave it ON overnight.  And keeping it ON avoids needing to constantly move the tiny swtich, and saves it from wear and tear.
    So, you might try just keeping the power swtich in the ON position, and pausing playback to "turn it OFF."

Maybe you are looking for

  • QR code occupying more space around the barcode

    Hi, I am creating a new form with 7 barcodes of type Paper forms Barcode(QR code). I have two problem in this... 1) I am giving the same width and height for all the barcodes. But in the final output the size differes for all. two are of one size, ot

  • Lost datafile Problem

    My database is in noarchivelog mode I had a tablespace with 3 datafiles and 1 datafile is deleted accidently. I know i cant recover the datafile as the database is in noarchivelog mode. my DB is only a test database. Now what i have to do inorder to

  • [Closed] Backward roll up of excel files

    Got a lovely thing I need help figuring out. Doing a rollup of a child spread sheet into a parent is easy. Just do a special paste or what ever you like the most. Now using that same logic is it possible for someone to change something in the parent

  • Saving metadata from Lightroom erases custom XMP data in DNG...

    Hello,    There seems to be an issue with the way Lightroom applies changes in from the LR catalog to the assets metadata.  The setup is LR 2.5 and there is an orginal set of images that have custom XMP data applied to them via Bridge.  There is one

  • Linking of LOV field to subtabs (URGENT)

    Please guide me how can i pass the value selected from LOV to subtabs so that i get the details in subtabs according to the detail selected from LOV. I have two subtabs that have to display different information about the employee selected from LOV w