When I open my Colour Picker, the middle block (which normally shows the colour in a gradient of shades) is just a solid colour depending on which H, S, B, R, G, B I have selected. How do I revert it back to normal?

When I open my Colour Picker, the middle block (which normally shows the colour in a gradient of shades) is just a solid colour depending on which H, S, B, R, G, B I have selected. How do I revert it back to normal?

Becky,
It seems that  the issue is caused by a corrupt folder called en_US or similar (depending on language) within the Adobe Illustrator 18 Settings folder, see post #7 by Jules in this thread,
https://forums.adobe.com/thread/1595766
so the solution should be to move or rename that folder (or the whole Adobe Illustrator 18 Settings folder).
You can find the folder in Move the folder (follow the link with that name) with Illy closed.
As a temporary roundabout way, you can select the lower rectangle to the right of the rainbow and DoubleClick to apply that to change the top rectangle and the values: the lower colour is the right one.

Similar Messages

  • The transfer function of the PID block doesn't show the derivator.

    Hello,
    I am trying to use the PID vi, but I when I try the box by itself, it doesn't behave as a "clasic" PID should behave. The main problem is that I don't manage to see the derivator. In the attached vi I compare the transfer function of the PID vi with the transfer function of a PID built by me. My version shows all what a PID should have: integral section (with decreasing magnitude and -90 phase), center area (with constant magnitude and 0 phase), and derivative area (with increasing magnitude and +90 phase).
    The PID vi only shows the integral part.
    You can also select a step input, and see the output directly. If you choose a large enough derivative time (100 times bigger than the integrator time), and you look closely to the first part of the output, you will see the pick due to the derivator in my version, but not in the PID.vi version.
    Does anyone knows what am I doing wrong? 
    Kind regards,
    Pablo Estevez
    Solved!
    Go to Solution.
    Attachments:
    TestPID.vi ‏31 KB

    Dear Nathand,
    Thanks for your answer, I tried the change and you are right. That shows that this not a standard PID, since that means (and actually I can see it now by checking inside the vi) that it is not using the derivative of the error but the derivative of the process variable. I know that this is used sometimes to prevent the effect of fast changing set-points, but it is a shame that they do not comment on it in the help, and that this is not a selectable feature. Do you know if there is a way to edit these pre-packaged vi's? 
    One more question, about the labview style. I included the sequences just to group terms and make the code more readable to separate the integrator from the derivator and not have a knot of entangled signals. Specially when I run the clean-up diagram, it gets very entangled. I have been looking for another way to do that (container boxes, groups). It would be nice if you could suggest me something I can do for it.
    Thanks again,
    Pablo 

  • HT4061 My iPad 2 crashed when I was upgrading from 7.02 to 7.04.  I have tried to reset the iPad several times, but it does not come back.  It gets stuck with a screen that shows iTunes in the middle with a graphic showing the adapter cord with an arrow

    What do I do now to restore without looking all my data, photos and settings?

    Did you do a backup before you did the iOS update. You should always do this in case of problems. Otherwise your data/files my be lost.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
     Cheers, Tom

  • ICal was linked to a Google account I canceled.  When I open iCal, a message says iCal can't connect to the account server.  Clicking OK repeats the message.  Clicking OK, iCal quits. How can I eliminate the problem server?

    iCal was linked to a gmail account I canceled.  When I open iCal, a message says iCal can't connect to the gmail account server.  Clicking OK repeats the message.  Clicking OK again causes iCal to quit. There is no opportunity to delete the link.  How can I eliminate the problem server or otherwise get iCal working again?  (OS 10.6.8)

    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '10,$d' /etc/hosts
    You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I

    I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
    Thank you.

    Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

  • When I open an album, thumbnail appear as dotted outlines instead of the image itself. Are my settings set improperly? How do I fix this?

    when I open an album, thumbnail appear as dotted outlines instead of the image itself. Are my settings set improperly? How do I fix this?

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

  • I have an apple magic mouse, sometimes when I slide mouse up to the left my whole window is enlarged.  How do I put window back to normal

    I have an apple magic mouse, sometimes when I slide mouse up to the left my whole window is enlarged.  How do I put window back to normal size

    Got confused between your header question about a wired mouse and the main question about a wireless mouse.  You said your magic mouse was frozen and added you do not have a wireless mouse.   Problem is ... the magic mouse is wireless.   The original mighty mouse was the corded version.
    The wired mouse is a regular problem.  After two to three years it tends to clog up. You can clean it (to a degree) as follows.
    Using an alcohol moistened, not wet, cotton bud, scratch at the mouse ball for a minute or so.   Then turn it upside down and on a clean piece of thick white paper or card on a firm surface, vigorously rub the mouse ball on the paper in a regular figure of eight.  Do this for a minute or so and occasionally tap the mouse on the paper.   This will help dislodge bits of fluff etc.   Then try again

  • When I open itunes, it blanks out as soon as it gets the store open.  How do I fix this?

    When I open itunes, it blanks out as soon as it gets the store open...completely blank.  How do I fix this?

    Please help

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • I just installe Lion and when I get to the log in screen it shows the two users but when I try to select either of them nothing happens. How can I fix this so I can log in.

    I just installe Lion and when I get to the log in screen it shows the two users but when I try to select either of them nothing happens. How can I fix this so I can log in.

    Can you select them with "Arrow left" or "arrow right" key on your keyboard?

  • HT201401 I have a voice speaking to me and i have to double tap the buttons. Also i cannot slide the screens. How do i get it back to normal.

    My phone has gone haywire. I have to double tap all the time. There is a voice talking to me. I cannot slide between screens. How do i get it back to normal.

    Do this, copied from page 143, iphone_user_guide 5.1 Accessibility features:
    Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 153.
    You can turn individual accessibility features on or off in Accessibility settings on iPhone. You can also turn some features on or off in iTunes when iPhone is connected to your computer.
    Turn on accessibility features using iPhone: Go to Settings > General > Accessibility.
    Turn on accessibility features using iTunes: Connect iPhone to your computer and select iPhone in the iTunes device list. Click Summary, then click Configure Universal Access at the bottom of the Summary screen.
    Message was edited by: Ingo2711

  • My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off.  Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes some

    My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off.
    Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes somewhere from 3-5 minutes for it to boot up. Then the lock screen with the time and whatnot shows up. From this point on, my iPhone has a chance to shut itself back down and I have to repeat the process over and over again. Most of the time the lock screen flashes and then goes straight to black (shut down) but sometimes I can make it a few menus before it shuts itself down.
    The only way to keep the iPhone on is to plug it into a charger of any sort. I'm fairly certain it isn't a battery charge issue because this happens at any % of power and sometimes my iPhone can use up all of its charge and not have this happen while other times I can be at 90-100% and it could randomly shut itself down. What can I do in this situation if some has some solution to this problem please let me know on [email protected] Thanks!

    Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

  • I am very confused. When I wanna to update my apps in app store, it shows the account which is my iPhone one is not my iPad one. how can I reset to my iPad account?

    I am very confused. When I wanna to update my apps in app store, it shows the account which is my iPhone one is not my iPad one. how can I reset to my iPad account?

    And I am very confused by your query. Your iTunes account is the same on all devices - unless of course you have multiple accounts to begin with.
    If you do have another Apple ID that you use for the iPad purchases, you can sign out of the account that is on the iPad in Settings>Store.
    Perhaps a few more details from you could clear up the confusion???

  • I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • I have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd   space bar. How do I change it back to the  original way of zooming?

    i have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd   space bar. How do I change it back to the  original way of zooming?

    Select the Zoom Tool in the tool box and see if Scrubby Zoom is unchecked or greyed out in the tool options bar.
    (you want Scrubby Zoom checked)

Maybe you are looking for