When I open the installer for CS5.5, message reading "Install can't be opened. You should eject the disk image" appears. I can't get 5.5 to install.

Any ideas?  I'm running Mac OS X 10.7.4...
Thank you!!

Try downloading a clean copy of CS5.5 from this location instead:
Other downloads

Similar Messages

  • Creative Suite CS5.5 re-install error: Install can't be opened. You should eject the disk image.

    I am trying to reinstall the Creative Suite CS5.5 as I have lost my disk.
    As soon as I try to open the installer I get the following message:
    Creative Suite CS5.5 re-install error: Install can't be opened. You should eject the disk image.
    I have deleted and redownloaded, downloaded from both safari and chrome and also downloaded it on different network connections.
    I have also checked my privacy settings to 'Allow applications downloaded from: Anywhere'
    Anyone have an answer to this problem?
    I'm running on OS X 10.7.5
    Thanks

    Right-click (CTRL-Click) that dmg
    Choose Open from the context menu.  
    Click Open in the warning dialog that appears.  

  • Downloaded mac cs 5.5 design standard when i attempt to install i get an error "install"can't be opened. you should eject the disk image

    downloaded cs 5.5 design standard when i attempt to install i get an error "install"can't be opened. you should eject the disk image

    I'm having the exact same problem. Downloaded using different browsers and gatekeeper is off. Help!

  • "Adobe Photoshop Lightroom 4.pkg" is damaged and can't be opened. You should eject the disk image.

    After 3 different downloads (2 in Safari, 1 in Firefox) I still get this message when I try to open Lightroom package: “Adobe Photoshop Lightroom 4.pkg” is damaged and can’t be opened. You should eject the disk image. I have a feeling it has to do with 3rd-party software on my Mac OSX 10.8.2 - how do I get around that?

    If you have already tried an alternate web browser then your next step would be to try an alternate Internet connection.  Perhaps try a wired connection if you are using wireless for example.

  • "Adobe ColdFusion 10" can't be opened. You should eject the disk image.

    Hello,
    Dowloaded Coldfusion from the Adobe website, both with Safari as with Firefox
    I want to install Coldfusion 10 on my Macbook. OS X 10.7.4 ( so not 10.8 ). When I double click the
    .dmg file , I always get "“Adobe ColdFusion 10” can’t be opened. You should eject the disk image." error. Never had this before. I've read about setting security on 'non signed packages', but this applies to 10.8.
    Is this a known issue ?
    Thanks,
    Dirk
    [email protected]

    Hello Swaraj,
    Thanks for the tip. What did work for me , is upgrading to OSX 10.7.5. I was inspired by this article. http://forums.adobe.com/message/4843052#4843052
    Regards,
    /Dirk

  • Reinstalling Design Premium 5.5 on a Mac - error message "Install" can't be opened. You should eject the disk image.

    Trying to reinstall Design Premium 5.5 on a Mac OSX 10.7.5 - once downloaded to my computer it will not install due to error message "Install" can't be opened. You should eject the disk image.
    Thanks

    no, redownload using a different browser from prodesigntools.com
    if you follow all 7 steps you can directly download a trial here:  Download Adobe CS5.5 Trials: Direct Links (no Assistant / Manager) | ProDesignTools
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • "Install Adobe Flash Player" is damaged and can't be opened. You should eject the disk image.

    Attempting to install Flash player on a mac. System requirements are met; old versions uninstalled. I keep getting this error message "Install Adobe Flash Player" is damaged and can't be opened. You should eject the disk image.

    Hi,
    can you try installing from this zip file? http://download.macromedia.com/pub/flashplayer/installers/archive/fp_11.7.700.203_archive. zip

  • I was wondering if someone could tell me how to start the installation for CS5.5 when downloaded no disk?

    I have lost my Adobe disk and have followed the instructions to download the file now from the Adobe website.  I now have the download but it is doing nothing to start the install process.  I was wondering if someone may be able to help me with where I go from here? 
    I have the icon on the desktop and when I double click it it just opens up to all the files.  There is a Install folder I click on it and nothing happens. I keep getting errors and have no idea what to do now. Help please?
    Thanks!

    Hi Kglad
    what's your os?
    Yosemite 10.10.2
    what file (name and extension) did you download?
    Downloaded from here:
    Download CS5.5 products
    Used the English Mac OS X file 1 of 1
    what program/suite are you trying to install?
    CS5.5 Master Suite
    The file downloaded file.  Asked me to click complete (or something like that ) I did.  It then added the icon to my desk top.  Now it just seems like it needs to start the install but it never launches.  I double click on the file and it opens up the folders in Finder.  I then have options of Deploy, Install, Payload and Packages. I double click on Install and nothing happens.
    I have no idea where to go from here.  The error that keeps telling me to reinstall Indesign etc (what ever Adobe program I click on I get the same) keeps happening.
    We have this problem now because we had to replace the harddrive on the Mac to and upgraded to Yosemite to get some other issues sorted.  Since then we can't do anything with the Adobe programs.

  • Launching the installer for CS5 Design Premium

    I downloaded a copy of CS5 Design Premium for Mac and attempted to launch the installer but received the following error message: "Install" can't be opened because it is from an unidentified developer. How can I launch the installer so I can activate the software?

    That message is from Apple's new Gatekeeper feature in OS X Mavericks. Nothing to do with Adobe.
    You can temporarily bypass Gatekeeper in order to install the software
    http://helpx.adobe.com/x-productkb/global/error-signed-distributor-mac-os.html

  • Trying to install Creative Suite 5 design premium onto a mac retina and when i try to open the installer it says " install can't be opened. you should eject the disk image."

    I get this every time i try to open the installer. I went to the tech support desk at my university and they spent an hour and a half going through these procedures with no result:
    Disabled GateKeeper
    Repaired permissions and verified startup disk
    Fully updated OS 10.8.5
    Downloaded same image multiple times-same issue
    Cleared hard drive space from 4.5GB available to 26GB available
    What can I do to successfully open the installer?

    Rsten where are you downloading Creative Suite 5 Design Premium from?

  • Install can't be opened. You should eject the disk image.

    Trying to download Flash Pro_11_5. I purchased the full license. Gatekeeper is off. Help!

    Tinyco please try downloading a fresh copy of the installation files at Download CS5.5 products.  If you continue to face difficulties then I would recommend downloading the DMG on a different network or a USB drive.

  • Have the media for CS5,and it is installed on my former computer. I changed computer, so I deactivated the licence. Then I proceeded to the installation. First CD was OK. After being asked to instert sencond CD I got message: Your installation encountered

    I have the media for CS5 installed on my former computer. I changed computer, so I deactivated the licence. Then I proceeded to the installation on the new computer. First CD was OK. After being asked to instert second CD I got message: Your installation encountered errors. Try to reboot your system and try again. I did with no result. It shows Exit code 7, and there is a log of errors. Any help?

    Exit Code: 6, Exit Code: 7 Installation Errors -
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 -
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
    for information on how to review your installation logs

  • Make the installer for my executable run the DAqcarddriver and runtime engine installer automatically

    *Hi
    I would like to know how to make the installer for my executable run the DAqcarddriver and runtime engine installer automatically
    I would like to include run time engine and the drivers of  my daqcard(AI16XE50),( and maybe Ni daq or anything else needed?) in order to make my application portable for other computers on OS win98 and winXP .
    How can I do that
    thank you in advance
    Olivier

    Olivier,
    What version of LabVIEW are you using to build your application?  On a remote computer you should only need the drivers you are using and the Run-Time Engine.  You can attach installers to LabVIEW 8 installers, but for previous versions you will have to add it by opening the installer configuration page, configuring your installer and then configure the Advanced properties.  This will allow you to attach a EXE to the installer which you can run.  Also depending on the version of LabVIEW will affect the OS version that you will be able to install the RTE on.  LabVIEW 7.0 is the last version that can be installed on Windows 98. 
    Please let me know if you have any further questions and please include the version of LabVIEW you are using.  Thanks!
    Andy F.
    National Instruments

  • Problems running the installer for Elements 11 - Mac

    Mac OS10.8.3
    15" Retina 2.7GHz  16GB RAM
    I have downloaded the installation file for Elements 11 using the Adobe Installer; upon running the installer I get an invalid checksum error.  Tried repeated times, same result.  Tried disabling checksum check in disk utility, lets me get one step futther to see the installer package contents upon mounting the .dmg.  When I run the installer, error message appears as follows;
    Failed to initialise Installer
    I got a message to install the Adobe Support Advisor, which I did.  I ran it, and it did not detect any issues. 
    Have also tried using disk utility to verify and repair the downlaoded adobe dmg before mounting it - no change in the error when I try to run the installer.
    Any advice?
    Thanks, JB.

    Please try initiating a direct download using the steps listed at http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l.  Please make sure to complete the Very Important Instructions section prior to clicking on the download link.
    If you continue to receive a message stating that your checksum is invalid then please try an alternate Internet connection.

  • Can's find the installer for d2k6i

    Dear all,
    I have downloaded the developer 2000 6i for Linux (d2k6irelease2.tar),
    after extract it, I could not find the installer or any script to
    start the installer. According to the installation guide A83546-02,
    it should be able to run the installer automatically when inserted the
    CD, but tried to burn the extracted files to CD, inserted and still no
    installer came out. Could anyone help to teach me how to start the
    installation of 6i in Linux.
    Thanks.
    Stanley

    Dear Armand,
    thanks, I could start the installer now.
    But one more stupid question, I have started the installer, but it
    prompts for no "RDBMS" software found.
    As I want to install the developer 6i into the same machine as the
    Oracle Database 8.1.7.0.1. I didn't use the "client-only" installation
    method, I set the same Oracle_Home as the database and didn't set the
    TWO_TASK, after input the SID the installer ask, it prompts for no
    RDBMS software found. But it is sure that the Oracle Database installed
    and started successfully.
    Thanks again.
    Stanley

Maybe you are looking for