When I opened up Thunderbird this afternoon, I tried opening up emails in my inbox. They were all blank. Same problem in my Sent box.
I had not been having any Thunderbird issues until today. When I went to my inbox to read e-mails, they were all blank when opened. Same thing happened when I went to my Sent Box. Plus the Subject Line in the e-mails would repeat themselves in each one I opened. All mixed up.
Here's where Microsoft has their Mac support forum:
http://www.microsoft.com/mac/support
If you mean you installed Windows on your Mac, see this tip:
Running Windows on a Mac, and Connecting it to Mac
Similar Messages
-
My Apple TV has been working fine, even earlier today. When I turned it on this afternoon, the TV indicated that "no signal" was being received. Restarted, unplugged, reset by holding menu and down button, etc. still no signal. Thoughts?
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
1. Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
2. Connect the micro USB cable to the Apple TV and to your computer.
3. Reconnect the power cable (only for Apple TV 3)
4. Open iTunes.
5. Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Question
When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?Is FF downloading the file as a .txt file? If so, go to "Folder Options" in the windows control panel. Click on the "File Types" tab. Scroll down until you reach the TXT file extension. Look to see what that extension opens with (lower part of panel). It probably shows notepad. Click on the <Change> button. Scroll down until you find "Microsoft Word." Select it and click the <OK> button. That should show the TXT extension is now associated with Microsoft Word. Click the <Close> button at the bottom of the panel.
If FF is downloading the file as any other type, use the same process as above except look for the corresponding extension instead. If the extension is not listed click on the <New> button and create an association using the extension in the file name and then associate it with MS Word.
davewdan -
iPhoto was working fine. Performed update for HP printer, which should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
when I updated my Apple tv it now shows about 10 computers on my network which I only have one tv...how do I get rid of the other "computers" listed as they are all the same, this was not happening before I updated the Apple TV
It looks to be a bug. A reboot to computer and/or Apple TV may resolve it.
You can provide feedback to Apple and file a report.
https://www.apple.com/feedback/
https://bugreport.apple.com/ -
when i change my bookmarks and close firefox and open it up again changes to my bookmarks have gone back to what they were before i changed them?
hi chris thanks for your help, the start in safe mode and reset tools solved the problem, ive spent days trying to solve it, you'v saved me a lot of frustration, thanks again,
-
I just got an iphone 4 yesterday. I got everything all set up and working great. When I woke up last this morning, my ipod has no sound and the albums covers are all mixed up. I've checked all my settings and volume control. My text sound won't work either. However, my ringtone works just fine.
Have you taken the steps recommended in the User Guide: restart, reset, restore?
-
Is it possible to put the photos on my iPhone 5 onto my MacBook Pro? The photos that I am trying to do this with we're not taken from the phone. They were imported from a computer. When I open image capture it only shows the photos that were taken from my phone and not the other ones. Please help. Thanks.
It is not possible to put synched photos on your iPhone from one computer into another.
-
I recently bought a lightning to 30 pin adapter for my new iPad so that I could continue to use my 30 pin to VGA cord, but when I plug the VGA cord into it it says it is not supported. They are all apple products, so why doesn't it work?
If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
My mac has started sending yahoo emails out as if they were being sent from an old gmail account I haven't used in years. Why has this just started happening?
It is important to understand that Mail uses TWO servers, a Receiving Server and a Sending Server.
When you create a new mail message, or reply to a message, the Sender server is shown in the message composition window like this:
That drop-down window allows you to select which of the Sending Servers you previously set up should be used.
In general, once you choose a Sending server, its choice will "stick" for all future replies to messages from that Receiving mailbox. -
itune not openes in windows 8. i have tried opening in compability and admin mode but no success.
can anybody explain why this is happenning.
It must be problem of itune.
This is crap software -
Everytime I try to open firefox, it just doesnt open up. no matter how many times I click it. I tried uninstalling it and reinstalling it, but it continues with the same problem. what should I do?
You can disable autoupdate by following these steps:
Go to main menu > Tools > Options > click on Advanced tab > click on Update tab and then click on the round radio button that says ''Never check for updates (not recommended: security risk)''
Refer the attached screenshot -
I now have 5 off occurrences of itunes listed as being open despite the fact that they were all created on 2 off laptops, neither of which has now got itunes activated. I now cannot activate itunes on either. The suggestion is that I cancel itnues activation on either which is rather difficult, obviously? Is there another way to access/ activate itunes?
Now fixed by de-authorising computer online at Itunes store...
-
Since i updated my Iphone 4S to IoS5 i cannot open my contacts! i have tried to disable the Icloud and still they do not open! anyone have any further ideas for me to try?
Check the age of the files you wish to open.
Keynote 6 (the latest you downloaded) will opne Keynote 5 (KN09) files but nothing earlier. For that KN5 will act as an intermediate format (you save KN4 and earlier as KN5), then KN6 can open the resultanr files.
Make sure you have a backup of your original files, in case KN6 cannot replicate some of your earlier builds and transitions.
Les -
So I tried it again and it said I still have all the same updates like i had never tried to install them? Any help? I want the new Itunes.
Run through this list of fixes and see if there is anything wrong with your machine
by #10 you should be fixed to Software Update and get iTunes.
..Step by Step to fix your Mac
Then try Software Update again, and or download iTunes directly from Apple and install it
https://www.apple.com/itunes/download/
Maybe you are looking for
-
Airport on my PowerBook doesn't connect. It was previously connecting to my Belkin Pre-N which quit again, and is again on it's way back to Belkin for repair. In the mean time, I've been connecting it to my iMac's airport through a shared connection,
-
Help needed in executing SQL query...
Hi, I am very new to JDeveloper. Curently i am tryin to execute an SQL query from the BPEL process, the output of the query is to be mapped to a variable field from a target xsd file. the query is fairly simple, like SELECT emp FROM emp_table WHERE e
-
Error:ora-01031 Insuffiecient Privileges when using "conn / as sysdba"?
HI all, I used oracle to login and used dbca to create a database. export ORACLE_SID=db9i sqlplus /nolog conn / as sysdba Error:ora-01031 Insuffiecient Privileges Notes: I can use "conn sys/pwd as sysdba" to connect instance.
-
WLC 5508 8.0.100 AP dropout anf fallback issue
After WLC upgrade to 8.0.100 [ not in HA mode], the AP seem to be dropping out and reconnect using the fallback to IP- inspite of the statically configured IP on the AP Running Outdoor mesh AIR-CAP1552E-N-K9 on WLC 5508 (Cisco Controller) >show boot
-
Is possible in a dialog screen attach a field functional like select-option
hi, Is it possible - in a dialog screen - to attach a field that has functionality like Select-options fields? And if so - how? and information about complex_selections_dialog