When I pan left, the volume is turned down instead of being panned left???

When I pan left, the volume is turned down instead of being panned left???
The instrument strip and output 1-2 are both in stereo in my environment. I don't get it-any ideas anyone?
I'm using logic 7.2.3
Thanx in advance
!

Thanks for your response.
hrmmm..... I don't see any "Pan Law". I'm running Logic 7.2.3 btw.
I think it might be my audio drivers.
"I have a FW 410 interface, everything seems to work fine except for the panning. Instead of panning properly, the volume is turned down when I pan left and volume is raised when I pan right. This only happens when I have the FW 410 interface selected in the audio/hardware setup. Panning under the built-in audio works fine so I would imagine it's the M-Audio drivers for the FW 410 that need a working update for Leopard."
Can anyone confirm this?
Thanx again in advance,
Paul

Similar Messages

  • When I make an outgoing call the recipient cannot hear as though the volume were turned down Lowe. However when I use my speaker phone function the recipient can hear at normal volume. Is there a fix for this issue? Thanks Teresa

    When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low
    However when I activate the speakerphone the recipient can hear me loud and clear
    Is there a fix for this?
    Thanks
    Teresa

    Hey Tlabounty,
    Thanks for the question. I understand you are experiencing issues with the microphone on your iPhone 5. To troubleshoot this issue, you may find the information in this article helpful:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Note that speakerphone and regular calls utilize seperate microphones on the device. It sounds like you have isolated the issue. Furthermore, if you determine that the issue is hardware related, the following resource may help you get started with the service process:
    iPhone Repair and Service - Apple Support
    http://www.apple.com/support/iphone/repair/
    Thanks,
    Matt M.

  • When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low. However when I activate the speakerphone the recipient can hear me loud and clear. I transferred my SIM Card into a new device Same problem

    When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low. However when I activate the speakerphone the recipient can hear me loud and clear. I transferred my SIM Card into a new device only to be subjected to the exact same problem. I have reset the phone clearing all the data and updated to the most recent software version available from itunes; and still no improvements. The results of my switching to a new phone would indicate a software issue.
    Does anyone out there have this problem and how can it be fixed?
    Thanks,
    Teresa

    Try removing the screen protector that is covering the microphone.
    Scratch that; wrong answer. I thought you meant you had trouble hearing.

  • The sound doesn't work.  It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored and still no

    It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored the device and still no sound.

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • ITunes crashes upon opening after telling me the volume is turned all the way down....

    After updating to iTunes 11.1.3, everything was fine initially. Suddenly though, as of yesterday, my iTunes decided that it was going to turn off it's own program-controlled volume. It was kind enough to alert me to this, and I closed the warning about it and set about raising the volume, wondering why I had turned it down in the first place. At this point though, iTunes had stopped responding at all. So, I forced it to quit, reopened it, and once again it alerted me to the fact that the volume was turned all the way off. Okay, I said, told it not to warn me again, closed the warning and then there was a new alert about the fact that my previous forced closure of iTunes resulted in extra windows being closed that it was now asking me if I wanted to reopen. I can't even click on the "Don't Reopen" button, as the program itself once again stops responding after I acknowledge the first warning about the lack of volume. Anytime I open iTunes it does this (repeated without fail, several dozen times now...). Once iTunes is open, none of the options in the Help or Edit or File or any of those buttons in the taskbar are actually clickable, since I can't do anything before acknowledging the alert about the volume, after which it inevitably stops responding. Tried restarting the Mac to no avail. Tried downloading and installing a fresh iTunes hoping it might repair the damaged files, to no avail. I can't actually remove the current iTunes from the computer since apparently it is 'essential to OS X'. Not really sure how to go about fixing this issue.....could anybody shed some light on this?
    Thanks!

    In that case I would reinstall your itunes. It will just install over the top of the existing program. As a precaution it is usually wise to make a copy(Backup) of your itunes folder when installing itunes. It should not affect anything but you never know
    You can find the install package for itunes 11 here
    http://www.apple.com/itunes/download/

  • I have a iPhone 3GS but the volume keeps going down till its off when playing songs. Help!, I have a iPhone 3GS but the volume keeps going down till its off when playing songs. Help!

    I have a iPhone 3GS but the volume keeps going down till its off when playing songs. Help!, I have a iPhone 3GS but the volume keeps going down till its off when playing songs. Help! I didn't have this problem before. I am listening via the speakers of my stereo. I have done that before but never had a problem like this before.

    Thought it had worked but soon found out it had not.
    after further days of trying finally, solved it for me Yesterday.
    turned off notifications when locked, and bingo, wow.
    i have not turned off iCloud but location services are also off.
    best thing to do I found was keep checking your usage, settings, general, usage, and flip down to bottom, if the standby and usage are similar there is a problem, if there is a big difference then all is ok. Just keep turning things off and on until the difference is very apparent.
    something on my phone was keeping the phone alive even when turned off, and I think this was the phone repeatedly trying to update continually.
    to me this is definitely down to the iOS, my wife has exactly same phone and iOS but hers doesn't have any problem and the battery lasts for days.
    the guy at the Genius Bar told me to restore the phone via iTunes, not iCloud. This is because iCloud remembers the exact info from your phone and simply reinstates it when you restore, and this includes the iOS too.
    when I get home from holidays that's what I'll do, or wait for iOS 8 in few weeks. But I'm so pleased I finally made it work, I was beginning to think ditch the phone and buy Samsung.
    anyway anyone out there please try my final solution and let me know if it works for you?

  • I can not install  Itunes 10.5 on vista or windows 7 my iphone 4 is much slower and freezes when i go to the store they turn me away with my laptops and tell me to buy there computer thats the only answer. I know there has to be away around it?

    I ca not install  Itunes 10.5 on vista or windows 7 my iPhone 4 is much slower and freezes and also certain apps and also certain features will not work on the phone now that I cannot update it to ios5. When I go to the store they turn me away with my laptops and tell me to buy there computer that's the only answer. I know there has to be away around it? I am also up for a new upgrade on my second phone line and was going to get a 4s but now I am thinking it may be the wrong choice I am very unhappy with Apple right now...

    WOW! That font is difficult to read. But, see if this support document helps you http://support.apple.com/kb/TS3989. Photos stream is based on date and photos more than 30 days old are removed. Photostream is designed as a temporary storage to allow you to download the photos to the computer.

  • So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

    So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
    I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
    I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
    Please help!

    You migh give resetting your NVRAM a try:
    http://support.apple.com/kb/ht1379

  • The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    If you want to get a little more "exotic" you can try remapping the function keys.  I did a little google searching and the hits that looked promising are,
    Mapping volume and eject keys to 3rd-party keyboard Other Hardware
    Spark
    Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
    You can also export and import your Hot Keys library, or save it in HTML format to print it.
    Spark is free, so use it without moderation!

  • I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up

    I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up. Any ideas?

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers.
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • After reset the SMC, my screen and the keyboard backlighting turn down at the same time when I cover the sensor.

    The keyboard backlighting is still on under the lit. What can I do? Thanks! (MacBook Pro 2011 13' ; Mac OS X; 2.3 GHz Interl Core i5; 4GB 1333 MHz DDR3)

    After reset the SMC, my screen and the keyboard backlighting turn down at the same time when I cover the sensor.
    That's precisely what they're supposed to do.

  • When working in photoshop the canvas/image turns black

    when working in photoshop the canvas/image turns black - not allowing me to view the materials.  what is causing this?  how can it be fixed?  very frustrating when working on a file and all of a sudden it's no longer visible.

    Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
    Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://forums.adobe.com/docs/DOC-2325
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • My ipod touch has 1.1 gb left of space on it. when i try to install an app thats 314 mb it gets three quarters of the way through and says my ipod has no space left. when i go to the storage it also says it has no space left. whats going on?

    my ipod touch has 1.1 gb left of space on it. when i try to install an app thats 314 mb it gets three quarters of the way through and says my ipod has no space left. when i go to the storage it also says it has no space left. whats going on?

    To download/install an app directly to the iPod you need available storage equal to about three times the file download size. Syncing the app to the iPod requires a lot less. Thus you either have to free up more storage or sync the app from your computer.

  • Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

    Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

    Hello, Miryam Maria. 
    Thank you for visiting Apple Support Communities. 
    I see you are experiencing issues with sound on applications when playing video/audio content.  If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute.  Below I have included an article that covers adjusting the  settings for the side switch.  Also, make sure to close all applications in Multitasking and power cycle the device.  Test the sound issue after processing these steps.
    iPad: Understanding the side switch
    http://support.apple.com/kb/ht4085
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Cheers,
    Jason H.

  • I can't turn the volume up or down on my MacBook Pro?

    I can't turn the volume up or down on my MacBook Pro? It shows a kind of "stop" sign? I can get the speakers to work by connecting my headphones to the computer and choosing the sound to be on the speakers, but as soon as I take the headphones out, I can't get any sound out of the speakers..
    Sometimes there is a "Red" light coming out of the AUX-port?

    Hey vgamborg,
    Thanks for using Apple Support Communities.
    This article should help you troubleshoot issues playing sound from the built-in speakers. Try the steps listed, and I quoted a part about the red light.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
    Have a nice day,
    Mario

Maybe you are looking for

  • Report for employees net and gross pay for a pay period

    Hi Gurus How should I approach to write a report which gives employees net pay, gross pay and cost center  for a pay period? Do i have to use cluster tables? As I am new to this module any help will be appreciated. Thanks in Advance

  • Date offset as input on query selection screen

    Alright all, I have a date variable which is based on current month/year.  We need to allow the user the ability to offset this date by a month.  e.g. if date is 06.2010, they will have the ability to enter '2' as the offset and this will give them d

  • Sql server agent not work

    hi every one , i use sql server agent to make a job which delete some rows from my table at 12:00 AM this job works on (Mydatabase1) but when i make another job to another database(Mydatabase2) i get this error from ViewJob HIstory : Myjob2,Error,1,F

  • ***Monitoring in NWA

    Hi Experts, How to Find error logs and Traces in NWA with reference to SAP PI. Thanks, Srinivasa

  • Modal popup with lightbox effect on page load

    Hi friends, I was looking for help for making a windows modal popup with reads a url from xml file and load it into windows modal popup in the centre of the screen on page load. The requirement was also that it will dim the rest of the page. After se